Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


Problem: Ethernet to PC and WIFI to router
#1
Question 
Hello Everyone,

I am new to moOde and configured my pi 4 as a SMB drive for PC via the internet and would also like to use the moOde as a wifi player.

Is there a way for me to configure the moOde in this way? Currently, when the ethernet cable plugged in, the wifi shows "not in use". I can access the moode.local from the ethernet, but not wifi.

Thanks,
Rotary
Reply
#2
Reboot and then post the Moode startup log.

Code:
moodeutl -l
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#3
Thank you for your quick reply, Tim! I tried connected the wifi first, then ethernet, it worked.

Here is the startup log.

pi@moode:~$ moodeutl -l
20210502 214527 worker: -- Start
20210502 214528 worker: Successfully daemonized
20210502 214528 worker: Integrity check (warning: nginx.conf)
20210502 214528 worker: Integrity check (warning: playerlib.php)
20210502 214528 worker: Integrity check (warning: rc.local)
20210502 214528 worker: Integrity check (passed with warnings)
20210502 214528 worker: Session loaded
20210502 214528 worker: Debug logging (off)
20210502 214528 worker: Device raw: Card0 (ALSA) | Card1 (Pro) | I2Sdev (none)
20210502 214528 worker: Device cfg: Name (USB audio device) | Card (1) | MPDdev (1) | Mixer (DX7 Pro) | Alsavol: (none)
20210502 214528 worker: ALSA volume (None)
20210502 214528 worker: -- System
20210502 214528 worker: Host name (moode)
20210502 214528 worker: moOde release (6.4.0 2019-11-24)
20210502 214528 worker: Raspbian OS (10.1)
20210502 214528 worker: Linux kernel (4.19.71-rt24-v8_191114r3 #1)
20210502 214528 worker: Platform (Pi-4B 1/2/4GB)
20210502 214528 worker: Architecture (aarch64)
20210502 214528 worker: MPD version (0.22~git)
20210502 214528 worker: CPU governor (performance)
20210502 214528 worker: USB boot not available
20210502 214528 worker: File system expanded
20210502 214528 worker: HDMI port off
20210502 214529 worker: File check (OK)
20210502 214529 worker: -- Network
20210502 214529 worker: eth0 exists
20210502 214529 worker: eth0 wait 0 for IP address
20210502 214532 worker: eth0 wait 1 for IP address
20210502 214535 worker: eth0 wait 2 for IP address
20210502 214538 worker: eth0 wait 3 for IP address
20210502 214541 worker: eth0 wait 4 for IP address
20210502 214544 worker: eth0 address not assigned
20210502 214544 worker: wlan0 exists
20210502 214544 worker: wifi country (US)
20210502 214544 worker: wlan0 trying SSID (RT-AC66U_B1_60_5G)
20210502 214545 worker: IP addr (192.168.50.188)
20210502 214545 worker: Netmask (255.255.255.0)
20210502 214545 worker: Gateway (192.168.50.1)
20210502 214545 worker: Pri DNS ()
20210502 214545 worker: Domain (192.168.50.1)
20210502 214545 worker: -- Audio
20210502 214545 worker: ALSA outputs unmuted
20210502 214545 worker: ALSA card number (1)
20210502 214545 worker: Audio output (USB audio device)
20210502 214546 worker: Audio formats (Unable to determine formats)
20210502 214546 worker: ALSA mixer name (DX7 Pro)
20210502 214546 worker: MPD volume control (disabled)
20210502 214546 worker: Hdwr volume controller not detected
20210502 214546 worker: -- Services
20210502 214546 worker: Reset renderer active state
20210502 214547 worker: MPD conf updated
20210502 214547 worker: MPD started
20210502 214547 worker: MPD accepting connections
20210502 214547 worker: Configure MPD outputs
20210502 214547 worker: MPD output 1 ALSA default (on)
20210502 214547 worker: MPD output 2 ALSA crossfeed (off)
20210502 214547 worker: MPD output 3 ALSA parametric eq (off)
20210502 214547 worker: MPD output 4 ALSA graphic eq (off)
20210502 214547 worker: MPD output 5 ALSA polarity inversion (off)
20210502 214547 worker: MPD output 6 ALSA bluetooth (off)
20210502 214547 worker: MPD output 7 HTTP stream (off)
20210502 214547 worker: MPD crossfade (off)
20210502 214547 worker: Audio source (Local)
20210502 214547 worker: Output device (Local)
20210502 214547 worker: Airplay receiver started
20210502 214547 worker: Shellinabox SSH started
20210502 214547 worker: USB auto-mounter (udisks-glue)
20210502 214547 worker: -- Music sources
20210502 214548 worker: USB sources (none attached)
20210502 214548 worker: NAS and UPnP sources (none configured)
20210502 214548 worker: -- Miscellaneous
20210502 214548 worker: Saved MPD vol level (0)
20210502 214548 worker: Preamp volume level (0)
20210502 214548 worker: MPD volume level (0) restored
20210502 214548 worker: ALSA volume level (None)
20210502 214548 worker: Auto-play (Off)
20210502 214548 worker: Maintenance interval (6 hrs)
20210502 214548 worker: Screen saver activation (Never)
20210502 214548 worker: Session permissions (OK)
20210502 214548 worker: Watchdog started
20210502 214548 worker: Ready
20210502 214602 watchdog: INFO Audio output is (closed)
Reply


Forum Jump: