Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


upgrade 4.1 > 4.2 failing
#1
mosbrief via ssh screenshot attached. Any ideas?

Thanks,

    John
Reply
#2
copy and paste the ssh terminal info as your screenshot is not showing...
Also post output from command      "moslog"
----------
bob
Reply
#3
(08-22-2018, 12:41 AM)DRONE7 Wrote: copy and paste the ssh terminal info as your screenshot is not showing...

Ah, did it make it this time?

   
Reply
#4
(08-22-2018, 12:41 AM)DRONE7 Wrote: Also post output from command      "moslog"

Here you go:

Code:
pi@moOde:~ $ moslog
// COMPONENT 2 - Auto-shuffle
//
////////////////////////////////////////////////////////////////

** Build Auto-shuffle
Cloning into 'ashuffle'...
fatal: unable to access 'https://github.com/Joshkunz/ashuffle.git/': gnutls_handshake() failed: Error in the pull function.
** Error: Git clone failed
** Error: image build exited
** Error: reboot to resume the build
Reply
#5
No issues from my home network

pi@rp3:~ $ sudo git clone https://github.com/Joshkunz/ashuffle.git
Cloning into 'ashuffle'...
remote: Counting objects: 259, done.
remote: Total 259 (delta 0), reused 0 (delta 0), pack-reused 259
Receiving objects: 100% (259/259), 50.10 KiB | 0 bytes/s, done.
Resolving deltas: 100% (163/163), done.
pi@rp3:~ $

-Tim
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#6
(08-23-2018, 12:59 AM)Tim Curtis Wrote: No issues from my home network

pi@rp3:~ $ sudo git clone https://github.com/Joshkunz/ashuffle.git
Cloning into 'ashuffle'...
remote: Counting objects: 259, done.
remote: Total 259 (delta 0), reused 0 (delta 0), pack-reused 259
Receiving objects: 100% (259/259), 50.10 KiB | 0 bytes/s, done.
Resolving deltas: 100% (163/163), done.
pi@rp3:~ $

-Tim

For me the in-place update from 4.1 to 4.2 failed with the messages outlined above, but a fresh installation went fine. The first 4.2 update went perfectly, now listening to Amy's.

Thanks for all this,

     John
Reply


Forum Jump: