12-01-2018, 05:42 PM
(12-01-2018, 01:31 PM)rh2018 Wrote: Hi Remy,
Having a 16x2 LCD display up and running I thought I would try an OLED panel.
I found a 0.96inch 128x64 12c SSD1306 panel but it has a reset pin in addition to the usual Vcc, Gnd, SCL and SDA pins.
Datasheet link - http://www.tinyosshop.com/datasheet/Tiny...Manual.pdf
I could not see a reference to a reset pin in pydPiper. Do you think this display will work with moOde or should I look for a 4-pin only display?
Regards,
Richard.
Hi Richard, you can ignore the reset pin. Just make sure it is configured for i2c interface (s1 and s2 soldered).
Remy