07-27-2022, 01:33 PM
(This post was last modified: 08-01-2022, 07:13 PM by psychofaktory.
Edit Reason: Addition
)
Hello,
I have been running a Raspberry Pi 3B with MoodeOS 4.2.
On it, the UPnP Client for MPD was activated under Moode and the DLNA server was deactivated.
A TwonkyServer v8.3 was running as DLNA server on the same device.
In this constellation, it was possible for me to access the Moode playlist from various Android smartphones using BubbleUPnP and then control it simultaneously from all UPnP control points.
Now I have MoodeOS 8.1.2 with the same settings on the same hardware.
Instead of the TwonkyServer, a MinimServer v2.1.2 is now used.
When the Moode playlist is accessed from the Android smartphones using BubbleUPnP, not all control points see the same playlist and inconsistencies occur.
Where is the error here, and how can the original behaviour be restored?
Addition:
I have another Raspberry Pi 1B+ with MoodeOS 6.4.2 where the Moode configuration is also identical.
However, there is no DLNA server installed at all, but an external MinimServer v2.1.2 is used.
In this constellation, the simultaneous control of different control points via BubbleUPnP is also still possible without any problems.
If a new track is selected, BubbleUPnP also shows on the other devices that a new track is playing.
Any changes to the playlist or the volume are immediately visible on all other devices.
Unfortunately, this does not work under MoodeOS 8.1.2.
Based on this constellation, I would rule out the possibility that the problem is caused by MinimServer.
I have been running a Raspberry Pi 3B with MoodeOS 4.2.
On it, the UPnP Client for MPD was activated under Moode and the DLNA server was deactivated.
A TwonkyServer v8.3 was running as DLNA server on the same device.
In this constellation, it was possible for me to access the Moode playlist from various Android smartphones using BubbleUPnP and then control it simultaneously from all UPnP control points.
Now I have MoodeOS 8.1.2 with the same settings on the same hardware.
Instead of the TwonkyServer, a MinimServer v2.1.2 is now used.
When the Moode playlist is accessed from the Android smartphones using BubbleUPnP, not all control points see the same playlist and inconsistencies occur.
Where is the error here, and how can the original behaviour be restored?
Addition:
I have another Raspberry Pi 1B+ with MoodeOS 6.4.2 where the Moode configuration is also identical.
However, there is no DLNA server installed at all, but an external MinimServer v2.1.2 is used.
In this constellation, the simultaneous control of different control points via BubbleUPnP is also still possible without any problems.
If a new track is selected, BubbleUPnP also shows on the other devices that a new track is playing.
Any changes to the playlist or the volume are immediately visible on all other devices.
Unfortunately, this does not work under MoodeOS 8.1.2.
Based on this constellation, I would rule out the possibility that the problem is caused by MinimServer.