Thank you for your donation!


Instruction Guide pydPiper for Audiophonics I-Sabre ES9023 V3 [Winstar 80x16 OLED]
#31
Just a heads up to all that still use a Raspdac kit from Audiophonics with the Audiophonics DAC I-Sabre V4 ES9023 and 16 x 2 OLED display,
I've just installed MoOde version 6 and used the code supplied here by Ricardo and it works fine!

Get those fingers tapping guys, a new version of MoOde from Tim and the team and a working display, whats not to like?
Reply
#32
Hi Cardone,
I've literally just posted a reply and yes it does work with MoOde version 6! Big Grin
Reply
#33
(08-11-2019, 04:52 PM)Strider Wrote: Hi Cardone,
I've literally just posted a reply and yes it does work with MoOde version 6! Big Grin

Hello, I also have a RaspDAC and I'm really happy. Wink

Power management also works with moode 6.0 .... Smile
Reply
#34
(08-11-2019, 05:01 PM)Cardone Wrote:
(08-11-2019, 04:52 PM)Strider Wrote: Hi Cardone,
I've literally just posted a reply and yes it does work with MoOde version 6! Big Grin

Hello, I also have a RaspDAC and I'm really happy. Wink

Power management also works with moode 6.0 .... Smile

That was my next move, I'm going to try the power management as I disconnected the power button LED a long while back as it was driving me crazy...
Thanks for the heads up!
Reply
#35
(11-16-2019, 07:51 PM)pondorondo Wrote: Hi there,
with my Audiophonics I-Sabre ES9023 V3 kit with Windstar 80x16 OLED and power button I am also happy, that it works - almost everything.

Just two problems remain
1. The power button keeps blinking and the button does not have a function anymore (in contrast to the similiar Volumio setup, where the button was functional, i.e. it is not a problem of hardware and connections)
2. Although I have set "time24hour = true" I only get 12h format

For the setup, I followed exactly the description in this thread. I use version 6.3.0 of moOde.

Is there any advice on how to make the power button work again?

Thanks in advance!

Hi,

if you proceeded as described in the description, then it should work without problems.
I also use the version 6.3.0 .....
When turning on (start up raspberry) flashes, then no longer.
When driving down flashing (for me 10 times) then off ..
It works the way it should .....
The clock shows 24h ..
Reply
#36
Hi there,

I would like to inform you that after a moode update 6.4.0 to 6.4.1 the display works without problems and adjustments


greeting
Zeferino
Reply
#37
Hi

i have try this script with moode 7.30
but Failed to start pydpiper.service

pi@moode:~/pydPiper $ sudo nano pages_raspdac_16x2.py
pi@moode:~/pydPiper $ sudo cp pydpiper.service /etc/systemd/system
pi@moode:~/pydPiper $ sudo systemctl enable pydpiper
Created symlink /etc/systemd/system/multi-user.target.wants/pydpiper.service → /etc/systemd/system/pydpiper.service.
pi@moode:~/pydPiper $ sudo systemctl start pydpiper
Failed to start pydpiper.service: Unit docker.service not found.
pi@moode:~/pydPiper $

what to do ?

Jem
Reply
#38
Rikardo,

did no use a fresh moode 4.5 and it work, but not with 7.3
what to do to make this work
now using Winstar WEH display want to use Oled with connection CS/DC/RES/SDA/SCL/VCC/GND

thanks
Reply
#39
(09-21-2021, 11:59 AM)Jempie Wrote: Rikardo,

did no use a fresh moode 4.5 and it work, but not with 7.3
what to do to make this work
now using Winstar WEH display want to use Oled with connection CS/DC/RES/SDA/SCL/VCC/GND

thanks

Hello Jempie, which docker version do you have?
This is what it looks like with my RASPDAC
I have Moode 7.3.0 on it ....
Code:
pi@moode:~ $ sudo systemctl status pydpiper
● pydpiper.service - pydPiper
  Loaded: loaded (/etc/systemd/system/pydpiper.service; enabled; vendor preset: enabled)
  Active: active (running) since Sat 2021-09-04 13:15:02 CEST; 1 months 0 days ago
Main PID: 1205 (docker)
   Tasks: 10 (limit: 2062)
  CGroup: /system.slice/pydpiper.service
          └─1205 /usr/bin/docker run --network=host --privileged -v /var/log:/var/log:rw -v /home/pi/pydPiper:/app:rw dhrone/pydpiper:v0.31-alpha python /ap

Sep 04 13:15:02 moode systemd[1]: Started pydPiper.
Sep 04 13:15:13 moode docker[1205]: pydPiper starting

Code:
pi@moode:~ $ moodeutl -l
20210904 131453 worker: -- Start
20210904 131454 worker: Successfully daemonized
20210904 131455 worker: Integrity check (passed)
20210904 131456 worker: File check (OK)
20210904 131456 worker: Session vacuumed
20210904 131457 worker: Session loaded
20210904 131457 worker: Debug logging (OFF)
20210904 131457 worker: -- Audio debug
20210904 131457 worker: ALSA cards: (0:sndrpirpidac | 1:empty | 2:empty | 3:empty
20210904 131457 worker: MPD config: (0:RPi-DAC | mixer:(none) | card:0)
20210904 131457 worker: ALSA mixer actual (none)
20210904 131457 worker: ALSA volume (none)
20210904 131457 worker: -- System
20210904 131459 worker: Host     (moode)
20210904 131459 worker: moOde    (7.3.0 2021-06-25)
20210904 131459 worker: RaspiOS  (10.10)
20210904 131459 worker: Kernel   (5.10.46-v7+ #1430)
20210904 131459 worker: Platform (Pi-3B+ 1.3 1GB)
20210904 131459 worker: ARM arch (armv7l, 32-bit kernel)
20210904 131459 worker: MPD ver  (0.22.8_p0x3)
Reply
#40
(10-05-2021, 10:52 AM)Cardone Wrote:
(09-21-2021, 11:59 AM)Jempie Wrote: Rikardo,

did no use a fresh moode 4.5 and it work, but not with 7.3
what to do to make this work
now using Winstar WEH display want to use Oled with connection CS/DC/RES/SDA/SCL/VCC/GND

thanks

Hello Jempie, which docker version do you have?
This is what it looks like with my RASPDAC
I have Moode 7.3.0 on it ....
Code:
pi@moode:~ $ sudo systemctl status pydpiper
● pydpiper.service - pydPiper
  Loaded: loaded (/etc/systemd/system/pydpiper.service; enabled; vendor preset: enabled)
  Active: active (running) since Sat 2021-09-04 13:15:02 CEST; 1 months 0 days ago
Main PID: 1205 (docker)
   Tasks: 10 (limit: 2062)
  CGroup: /system.slice/pydpiper.service
          └─1205 /usr/bin/docker run --network=host --privileged -v /var/log:/var/log:rw -v /home/pi/pydPiper:/app:rw dhrone/pydpiper:v0.31-alpha python /ap

Sep 04 13:15:02 moode systemd[1]: Started pydPiper.
Sep 04 13:15:13 moode docker[1205]: pydPiper starting

Code:
pi@moode:~ $ moodeutl -l
20210904 131453 worker: -- Start
20210904 131454 worker: Successfully daemonized
20210904 131455 worker: Integrity check (passed)
20210904 131456 worker: File check (OK)
20210904 131456 worker: Session vacuumed
20210904 131457 worker: Session loaded
20210904 131457 worker: Debug logging (OFF)
20210904 131457 worker: -- Audio debug
20210904 131457 worker: ALSA cards: (0:sndrpirpidac | 1:empty | 2:empty | 3:empty
20210904 131457 worker: MPD config: (0:RPi-DAC | mixer:(none) | card:0)
20210904 131457 worker: ALSA mixer actual (none)
20210904 131457 worker: ALSA volume (none)
20210904 131457 worker: -- System
20210904 131459 worker: Host     (moode)
20210904 131459 worker: moOde    (7.3.0 2021-06-25)
20210904 131459 worker: RaspiOS  (10.10)
20210904 131459 worker: Kernel   (5.10.46-v7+ #1430)
20210904 131459 worker: Platform (Pi-3B+ 1.3 1GB)
20210904 131459 worker: ARM arch (armv7l, 32-bit kernel)
20210904 131459 worker: MPD ver  (0.22.8_p0x3)
Dear Cardone,

I just follow the script of pydpiper
But it does not work with the display  it's a bigger display.
Reply


Forum Jump: