Thank you for your donation!


Instruction Guide AUDIOPHONICS RaspDAC Mini Kit - I-Sabre ES9038Q2M
#51
Hello and thanks for the hint.

Found that and burned it on the SD. Works well as far as the time of the one hour less is displayed than we have in Germany.
Can I fix this somehow?

Greetings Andreas
Reply
#52
(01-08-2019, 09:26 PM)Andy Ruhrpott Wrote: Hello and thanks for the hint.

Found that and burned it on the SD. Works well as far as the time of the one hour less is displayed than we have in Germany.
Can I fix this somehow?

Greetings Andreas

Just check the settings of moOde m8

https://github.com/moode-player/moode/bl.../setup.txt
<marquee behavior="alternate" scrolldelay=150
~~~~>>>Please always follow rules and read before you post<<<~~~~

</marquee>
Reply
#53
Rikardo,

can i add the display they use with the mini on my ES9023 dac?
Reply
#54
(02-25-2019, 09:48 PM)Jempie Wrote: Rikardo,

can i add the display they use with the mini on my ES9023 dac?

dont think so you can do. As far as I remember those have a different connections
<marquee behavior="alternate" scrolldelay=150
~~~~>>>Please always follow rules and read before you post<<<~~~~

</marquee>
Reply
#55
I need help how to connect the display after "spi" to raspberry pi?


Attached Files Thumbnail(s)
   
Reply
#56
New Image page for AUDIOPHONICS products, must admit I llike the look of the new RaspTouch.

https://www.audiophonics.fr/en/blog-diy-...image.html
Reply
#57
(03-06-2019, 05:00 PM)nowy1 Wrote: I need help how to connect the display after "spi" to raspberry pi?

Hello,
My settings.
• 1: Ground -> PIN 20
• 2: VCC 3.3V -> PIN 17
• 3: D0 -> PIN 23
• 4: D1 -> PIN 19
• 5: RES -> PIN 22 = GPIO 25 <-
• 6: DC -> PIN 18 = GPIO 24 <-
• 7: CS -> PIN 24

Then you have to make the setting in moode_oled_1.54_spi_audiophonics.py.
this is what the adaptation looks like for me:
serial = spi (port = 0, device = 0, gpio_DC = 24, gpio_RST = 25)

Then a reboot
Reply
#58
Some changes in install for new moOde 5.x versions. Please read first page in this thread 
Changes related to 
  • - Sabre DAC 
  • - LIRC installation
<marquee behavior="alternate" scrolldelay=150
~~~~>>>Please always follow rules and read before you post<<<~~~~

</marquee>
Reply
#59
(04-16-2019, 10:27 AM)rikardo1979 Wrote: Some changes in install for new moOde 5.x versions. Please read first page in this thread 
Changes related to 
  • - Sabre DAC 
  • - LIRC installation

Thanks Richard, just trying a install now. Might skip LIRC for the moment, I am now using a amp with remote for volume and mute, so volume set to disable.
Reply
#60
(04-16-2019, 10:51 AM)kit1cat Wrote:
(04-16-2019, 10:27 AM)rikardo1979 Wrote: Some changes in install for new moOde 5.x versions. Please read first page in this thread 
Changes related to 
  • - Sabre DAC 
  • - LIRC installation

Thanks Richard, just trying a install now. Might skip LIRC for the moment, I am now using a amp with remote for volume and mute, so volume set to disable.

keeping IR in place just cos can switch to SPDIF and also good for basic stop/play or skip tracks.

The volume I keeping HW control in settings but have it to 100 all the time and use volume on my Sugden amp
<marquee behavior="alternate" scrolldelay=150
~~~~>>>Please always follow rules and read before you post<<<~~~~

</marquee>
Reply


Forum Jump: