Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


Instruction Guide AUDIOPHONICS RaspDAC Mini Kit - I-Sabre ES9038Q2M
#90
(11-29-2019, 03:01 PM)kit1cat Wrote:
(11-29-2019, 02:52 PM)TookaFace Wrote: Hey, here what i've done with 6.4 (oled + IR):

Code:
sudo apt-get -y install python-smbus libjpeg-dev lirc
Maybe you will have issue with lirc during install, it's normal.

Code:
sudo pip install -U pip
sudo -i pip install --upgrade pip setuptools
sudo -H pip install --upgrade luma.oled

Add to /boot/config:
Code:
dtparam=spi=on
dtoverlay=gpio-ir,gpio_pin=4

Download those updated scripts for oled and lirc (with a menu now) (those files came from audiophonics iso image):
Code:
https://drive.google.com/open?id=1zlMPlWGG9EwosFfl_FIrDrCgQLECErU8

Extract 'oled' folder into /home/pi/
Code:
cd /home/pi/oled 
sudo chmod 755 /home/pi/oled/raspdac_oled_main.py
sudo chmod 644 oled.service
sudo cp oled.service /etc/systemd/system/
sudo systemctl enable oled

Extract 'lirc' folder into /home/pi/
Code:
cd /home/pi
sudo cp -r lirc/* /etc/lirc

And for finish:
Code:
sudo apt-get install -f

That should normalize broken lirc install

Remove lines in /etc/modules or /etc/rc.local if you added these.
No need to do anything else now.

Reboot, and if i didn't forget anything, it should work.

Thanks, will give it ago.

Installed with no problems, but still no working remote. Will try again tomorrow with a fresh 6.4 image, mine has been updated a few times from 6.3.1. Remote was working fine in 6.3.
Reply


Messages In This Thread
RE: AUDIOPHONICS RaspDAC Mini Kit - I-Sabre ES9038Q2M - by kit1cat - 11-29-2019, 06:26 PM

Forum Jump: