(03-06-2019, 05:00 PM)nowy1 Wrote: I need help how to connect the display after "spi" to raspberry pi?
Hello,
My settings.
• 1: Ground -> PIN 20
• 2: VCC 3.3V -> PIN 17
• 3: D0 -> PIN 23
• 4: D1 -> PIN 19
• 5: RES -> PIN 22 = GPIO 25 <-
• 6: DC -> PIN 18 = GPIO 24 <-
• 7: CS -> PIN 24
Then you have to make the setting in moode_oled_1.54_spi_audiophonics.py.
this is what the adaptation looks like for me:
serial = spi (port = 0, device = 0, gpio_DC = 24, gpio_RST = 25)
Then a reboot