Have a piano 2.1 and pi 3 working fine... added Kali and now no output at all... 
Everything seems to work as expected...Kali shows blue lights ..... piano powers up and various i2c displays confirm files are playing.... but they're not making wonderful noise ...
Changed config to include glb_mclk Enabled and rebooted, cleared cache, checked alsa... still no output.....
So far this is the worst purchase ever.... everything else I've added to the Pi worked ootb or a google fixed it but this is just unfathomable....
anyone care to share their working config...?
EDIT brand new install and same problem.....No Output....wtf ...
Well, no output..no support...no debugging .. no work...
Everything seems to work as expected...Kali shows blue lights ..... piano powers up and various i2c displays confirm files are playing.... but they're not making wonderful noise ...
Changed config to include glb_mclk Enabled and rebooted, cleared cache, checked alsa... still no output.....
So far this is the worst purchase ever.... everything else I've added to the Pi worked ootb or a google fixed it but this is just unfathomable....
anyone care to share their working config...?
EDIT brand new install and same problem.....No Output....wtf ...
Code:
Audio Information
INPUT PROCESSING
Source: http://5.152.208.98:8058
Encoded at: VBR compression
Decoded to: 24 bit, 44.1 kHz, Stereo, 128 kbps
DSP OPERATIONS
Resampling: 32 bit, * kHz, Stereo (SoX very high quality)
Crossfeed: off
Equalizer: Graphic EQ: (off), Parametric EQ: (off}
Crossfade: 0 seconds
Other: Volume normalize (no}, Replaygain (off)
Chip options: FIR interpolation with de-emphasis, gain=0 dB, boost=0 dB
Volume ctl: Software (MPD 32-bit float with dither)
OUTPUT STREAM
Destination: Local
Encoded at: 32 bit, 44.1 kHz, Stereo, 2.822 mbps
AUDIO DEVICE
Device: Allo Piano 2.1 Hi-Fi DAC
Chip: Burr Brown PCM5142
Interface: I2S
S Y S T E M P A R A M E T E R S
Date and time = 2019-01-17 20:36:49
System uptime = up 6 minutes
Timezone = Pacific/Auckland
moOde = Release 4.4 2018-12-09
Host name = moode
ETH0 IP = 192.168.1.22
ETH0 MAC = b8:27:eb:ee:a9:40
WLAN0 IP = unassigned
WLAN0 MAC = no adapter
WiFi country = US
HDWR REV = Pi-3B 1GB v1.2
SoC = BCM2835
CORES = 4
ARCH = armv7l
RASPBIAN = 9.6
KERNEL = 4.14.84-v7+
KTIMER FREQ = 100 Hz
USB BOOT = enabled
Warranty = OK
ROOT size = 7.3G
ROOT used = 29%
ROOT avail = 5.0G
FS expand = expanded
MEM free = 708 MB
MEM used = 57 MB
Temperature = 49.4°C
CPU GOV = performance
MPD SCHDPOL = TS
P3-WIFI = Off
P3-BT = Off
HDMI = Off
ETH0 CHECK = On
MAX USB CUR = Off
UAC2 FIX = Off
ETHPORT FIX = Off
SSH server = Off
LED0 = on
LED1 = on
C O R E S E R V E R S
PHP-FPM = 7.0.30
NGINX = 1.10.3
SQLite = 3.16.2
C P U L O A D
CPU %usr %sys %idle
all 0.63 0.38 99.00
0 2.01 0.00 97.99
1 0.51 0.00 99.49
2 0.00 1.49 98.51
3 0.00 0.00 100.00
P R O C E S S L O A D
PRI RTPRIO COMMAND %MEM PSR %CPU
29 - mpd 2.6 2 2.2
19 - sysinfo.sh 0.2 0 1.6
19 - systemd 0.6 0 0.5
19 - kworker/0:1 0.0 0 0.3
19 - php-fpm7.0 1.4 1 0.3
19 - sudo 0.3 3 0.3
19 - worker.php 1.2 0 0.2
19 - systemd-journal 0.4 1 0.1
19 - systemd-udevd 0.3 1 0.1
C L O C K F R E Q U E N C I E S
arm = 1200 MHz pwm = 0 MHz
core = 400 MHz emmc = 200 MHz
h264 = 300 MHz pixel = 0 MHz
isp = 300 MHz vec = 0 MHz
v3d = 300 MHz hdmi = 0 MHz
uart = 47 MHz dpi = 0 MHz
SD card = 50 MHz
S Y S T E M V O L T A G E S
core = 1.3000V
sdram controller = 1.2000V
sdram I/O = 1.2000V S Y S T E M P A R A M E T E R S
Date and time = 2019-01-17 20:36:49
System uptime = up 6 minutes
Timezone = Pacific/Auckland
moOde = Release 4.4 2018-12-09
Host name = moode
ETH0 IP = 192.168.1.22
ETH0 MAC = b8:27:eb:ee:a9:40
WLAN0 IP = unassigned
WLAN0 MAC = no adapter
WiFi country = US
HDWR REV = Pi-3B 1GB v1.2
SoC = BCM2835
CORES = 4
ARCH = armv7l
RASPBIAN = 9.6
KERNEL = 4.14.84-v7+
KTIMER FREQ = 100 Hz
USB BOOT = enabled
Warranty = OK
ROOT size = 7.3G
ROOT used = 29%
ROOT avail = 5.0G
FS expand = expanded
MEM free = 708 MB
MEM used = 57 MB
Temperature = 49.4°C
CPU GOV = performance
MPD SCHDPOL = TS
P3-WIFI = Off
P3-BT = Off
HDMI = Off
ETH0 CHECK = On
MAX USB CUR = Off
UAC2 FIX = Off
ETHPORT FIX = Off
SSH server = Off
LED0 = onCode:
pi@moode:~ $ ./piano.sh
Dual mode: Dual-Mono
Subw mode: None
Sub xover: 60
Sub level: 81%
Main levl: 100%
Mstr levl: 100%
pi@moode:~ $
----------
bob
bob
