Thank you for your donation!


moOde release 4.1
#1
Hi,

moOde release 4.1 is available at moodeaudio.org Smile It can be built manually using the new Build Recipe v2.4 or via the new automated OS Builder v2.4. See the Support section for information on how to use the Builder.

This release supports the new Raspberry Pi 3B+, 5G Wifi, new Bluetooth stack, MPD, UPnP renderer, Samba scanner and many other great features and improvements.

There is also an in-place update for moOde 4.0 --> 4.1 that is available via SSH using the command below. It takes 30 - 60 minutes to complete.

Code:
sudo /var/www/command/updater.sh r40a

For more information about this release refer to the release notes below and be sure to visit the moOde Github repositories at https://github.com/moodeaudio which contain the sources and other important information.

-Tim

Code:
########################################################
//
// 4.1 Release 2018-04-02
//
########################################################

New features

- NEW: NAS config with Samba scanner 
- NEW: Pi Touch UI layout
- NEW: Volume control with step limiter
- NEW: Renderer active indicators
- NEW: Resume MPD after Bluetooth

Platform

- NEW: Support for Pi-3B+
- NEW: Stretch Lite 2018-03-13
- NEW: Linux Kernel branch 4.14.y
- NEW: BlueZ stack 5.49

Updates

- UPD: Bump to MPD 0.20.18
- UPD: Bump to PHP 7.0.27
- UPD: Bump to Upmpdcli 1.2.16
- UPD: Bump to Squeezelite 1.8.7-1052 
- UPD: Use mpd index order for Library track sort
- UPD: Radio station supports playlist as url
- UPD: Reset coverart search pri to 0
- UPD: Custom service descriptor for Players >>
- UPD: Auto-refresh page after Customize update
- UPD: Add file size validation to bgimage chooser
- UPD: Add mpd output check and config to startup
- UPD: Add raspbian ver to moodelog, sysinfo and about
- UPD: Add some margin to Browse action menu icon
- UPD: Add vers= and sec= to SMB mount flags
- UPD: Add wifi country code, default to US
- UPD: Deprecate Airplay metadata
- UPD: Deprecate Djmount for miniDLNA
- UPD: Improved library Loader
- UPD: Improved updater error checking
- UPD: Improved renderer connect management
- UPD: Improved WiFi scanner
- UPD: Improved UI responsivness
- UPD: Remove accumulated code

Radio stations

- DEL: Soma FM - Doomed

Bug fixes

- FIX: Host AP mode not starting in some scenarios
- FIX: LocalUI starts too early in some scenarios
- FIX: Horiz scrollbar appears on pi touch lib panel
- FIX: Minor padding issues in panels.css
- FIX: Invalid param in .xinitrc
- FIX: Timeknob bounds check excluding lower portion
- FIX: Bluetooth mpd output not reported in moode log
- FIX: Wrong theme switch/case in autoConfig
- FIX: Players >> screen displaying self host
- FIX: USB drive listing in moode log
- FIX: Autofocus for ssid and server fields
- FIX: Show/hide certain fields on NAS config
- FIX: Minor timeknob issues


Attached Files Thumbnail(s)
   
Reply
#2
(04-07-2018, 08:31 PM)Tim Curtis Wrote: Hi,

moOde release 4.1 is available at moodeaudio.org
There is also an in-place update for moOde 4.0 --> 4.1 that is available via SSH using the command below. It takes 30 - 60 minutes to complete.

Code:
sudo /var/www/command/updater.sh r40a

Done.... Smile

And it only took 16 minutes (I used the command line using ssh).
When it asked to restart, it wouldn't do it.... I had to unplug the RPI.
So far no other problems. It didn't even touch the modifications I made for the 4-digit tracknumbers.

- Love the changes on the volume...
- Beauty error: Customization settings: Alpha Blend: the field is not wide enough to display the two decimal numbers
- Screen blank: is also reset to 10mins

Johan
 Angry
Reply
#3
Just ran the update via SSH, took 19 minutes on my system, rebooting now and... success!

System information

S Y S T E M    P A R A M E T E R S  

Date and time = 2018-04-07 20:08:04
System uptime = up 5 minutes
Timezone = America/New_York
moOde = Release 4.1 2018-04-02

Host name = moode
ETH0  IP = 10.0.1.195
ETH0  MAC = b8:27:eb:9c:32:6a
WLAN0 IP = unassigned
WLAN0 MAC = b8:27:eb:c9:67:3f
WiFi country = GB

HDWR REV = Pi-3B+ 1GB v1.3
SoC = BCM2835
CORES = 4
ARCH = armv7l
RASPBIAN = 9.4
KERNEL = 4.14.32-v7+


BIG thanks to Tim (as usual) and to all those who helped devise the easy to use build script!
Reply
#4
Nice :-)

Remember to open the Network config screen and change your Wifi country to "United States", then reboot!

-Tim
Reply
#5
Awesome news thanks Tim. Running the update now.
Reply
#6
Hello!

Do not get access to raspbian lite via ssh. (release 13.03.2018).
Do I have to use an older raspbian version? The older version to use stated in the build support isn't available anymore.

Greetingz, Robert
Reply
#7
Thanks for the update. It worked.

I have two questions (edit: one is already answered by myself Smile ) :
- How do I access the nice modal with the volume selector on mobile? I thought remembering Tim post a nice image of this, but I can't seem to find the link ** I found the speaker icon and the three dots underneath, sorry).
- Any particular change for every script to be root AND also have +x permissions on the /var/www/ folder? I think it is a bit overkill to have both executable permissions and be root just for js scripts that are run on client.

Thanks again,
Rafa.
Reply
#8
Noticed that the update was available late last night, ssh'd in, started update with sudo /var/www/command/updater.sh r40a. Left it running, went to bed.
This morning, all done, rebooted, no adjustments and it's working absolutely fine. Now to explore the new features.

Many Thanks Tim.

Ian
Reply
#9
Tim, update went like a charm (25 minutes on RPi3 via LAN). The only issue I had with 4.0 - time slider on mobile - is still unrepaired. It doesn't respond in portrait view at all and in landscape it does but I have to circling outside this "time circle".
But thank you.
Reply
#10
Tim, any plan for support Sparky?
Reply


Forum Jump: