Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


Nas setup windows 10 problem
#1
Hello everyone ,

I am using moode player for a long time and i love it. In the past few days i had an idea of using as a music source my windows 10 pc  and particularly to share an external hdd which is attached to the pc.

The problem is that i cannot mount it. I get the message Share cannot be blank. Any thoughts? My raspberry pi is 3B+ and moode version is 6.4.2.

The scan never finds my shared hdd. I always edit manually the path but no luck.

If someone can guide me through the steps it will be much appreciated.

Thank you.
Reply
#2
hello i try to clarify it.
The services must first be activated under Win10.
-> Networks and Sharing Centers <-
Then search under network.
Then all clients in the network are displayed
With a click on the IP address of the moode you have the connection and can add your folder.
I hope I could help you.....

[attachment=1368]
[attachment=1369]
[attachment=1370]
Reply
#3
I have activated the services.
Does not show up anything under network. I dont know why.
I did this. Any help? Drives me nuts.


Attached Files Thumbnail(s)
   
Reply
#4
(05-30-2020, 09:20 AM)hunter123 Wrote: Hello everyone ,

I am using moode player for a long time and i love it. In the past few days i had an idea of using as a music source my windows 10 pc  and particularly to share an external hdd which is attached to the pc.

The problem is that i cannot mount it. I get the message Share cannot be blank. Any thoughts? My raspberry pi is 3B+ and moode version is 6.4.2.

The scan never finds my shared hdd. I always edit manually the path but no luck.

If someone can guide me through the steps it will be much appreciated.

Thank you.

(05-30-2020, 10:37 AM)hunter123 Wrote: I have activated the services.
Does not show up anything under network. I dont know why.
I did this. Any help? Drives me nuts.

I see that you have already integrated a network drive -> dietpi ...
[attachment=1372]

The same you mast with Moode ....
Integrate a drive under network word
then enter the ip-addr of the moode in the field.
For example \\ 10.10.10.10 \
Then go to search and the client + drive will appear
Integrate and that's it ...

You should do like dietpi ...
Moode should be in the same network, otherwise routing ....

Ciao
Zeferino
Reply
#5
dietpi is just the name of the folder. I dont use dietpi.

Now i dont know how but MOODE appears under the network. I dont know how i can do it.


Attached Files Thumbnail(s)
           
Reply
#6
(05-30-2020, 09:20 AM)hunter123 Wrote: Hello everyone ,

I am using moode player for a long time and i love it. In the past few days i had an idea of using as a music source my windows 10 pc  and particularly to share an external hdd which is attached to the pc.

The problem is that i cannot mount it. I get the message Share cannot be blank. Any thoughts? My raspberry pi is 3B+ and moode version is 6.4.2.

The scan never finds my shared hdd. I always edit manually the path but no luck.

If someone can guide me through the steps it will be much appreciated.

Thank you.

(05-30-2020, 12:52 PM)hunter123 Wrote: dietpi is just the name of the folder. I dont use dietpi.

Now i dont know how but MOODE appears under the network. I dont know how i can do it.

I only see Moode under Network !!
But not a desktop user. Have the file sharing been set up?
Please check that ...
Reply
#7
Now we can see them both. What i do now? Thank you.


Attached Files Thumbnail(s)
   
Reply
#8
(05-31-2020, 05:25 PM)hunter123 Wrote: Now we can see them both. What i do now? Thank you.

under Advanced Mount flags change the vers from 1 to 3. Type in a good user/pass and it should work
Reply
#9
(05-31-2020, 09:34 PM)HemiRick Wrote:
(05-31-2020, 05:25 PM)hunter123 Wrote: Now we can see them both. What i do now? Thank you.

under Advanced Mount flags change the vers from 1 to 3. Type in a good user/pass and it should work

I did but still share cannot be blank shows up.
Reply
#10
(06-01-2020, 07:45 AM)hunter123 Wrote:
(05-31-2020, 09:34 PM)HemiRick Wrote:
(05-31-2020, 05:25 PM)hunter123 Wrote: Now we can see them both. What i do now? Thank you.

under Advanced Mount flags change the vers from 1 to 3. Type in a good user/pass and it should work

I did but still share cannot be blank shows up.

OK.
I will create some pictures and upload them .......
They will be there in 10 minutes ..
Maybe it works better

[attachment=1385]
Click USB-Drive + Properties
[attachment=1386]
[attachment=1387]

[attachment=1389]

[attachment=1388]

[attachment=1390]
[attachment=1391]
Reply


Forum Jump: