Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


volume setting with Audiophonics I-Sabre ES9038Q2M
#1
Hi,

I face a strange issue with the volume type setting in audio output setting page : I selected the audiophonics ES9028/9038 I2S device in the list (I purchased my DAC a few days ago), but I can only use the "software" volume : with this choice I can then change the volume with moOde, whereas if I choose "hardware", the volume value displayed is fixed, and indeed I can't modify the output volume with moOde.
(Note: I don't have any knob connected for volume adjustment).

I'm surprised by this behavior, as I thought that I could change volume in a hardware manner (with the adequate chip on the DAC). I had also tested Volumio (but I really prefer moOde, without any doubt), in which I could change volume from Volumio with hardware type selected. So maybe there's something to do in order to have the same possibility with moOde ?

That's for sure not a big issue as I will probably not hear a big difference, but I would like to be sure to select the best volume type to preserve quality sound.

Thanks in advance for your help,

Benji
Reply
#2
Reboot and post the contents of the startup log either using the command moodeutl -l or it can be downloaded from the Logs section of System Config.
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#3
Hi Tim and thanks for this quick reply ! please find below the requested log :

Code:
20231206 070316 worker: --
20231206 070316 worker: -- Start moOde 8 series
20231206 070316 worker: --
20231206 070316 worker: Successfully daemonized
20231206 070316 worker: Waiting for Linux startup...
20231206 070322 worker: Linux startup complete
20231206 070322 worker: Boot config backed up
20231206 070324 command/index.php: Connection to MPD failed
20231206 070325 worker: File check (OK)
20231206 070327 worker: Session vacuumed
20231206 070327 worker: Session loaded
20231206 070327 worker: Debug logging (OFF)
20231206 070327 worker: Reduced system logging (OFF)
20231206 070327 worker: --
20231206 070327 worker: -- Audio debug
20231206 070327 worker: --
20231206 070327 worker: ALSA cards: (0:DAC | 1:empty | 2:empty | 3:empty
20231206 070327 worker: MPD config: (0:Audiophonics ES9028/9038 DAC | mixer:(Digital) | card:0)
20231206 070327 worker: ALSA mixer actual (Digital)
20231206 070328 worker: ALSA Digital volume set to (93%)
20231206 070328 worker: --
20231206 070328 worker: -- System
20231206 070328 worker: --
20231206 070330 worker: Host      (moode)
20231206 070330 worker: Hardware  (Pi-3B 1.2 1GB)
20231206 070330 worker: moOde     (8.3.6 2023-09-05)
20231206 070330 worker: RaspiOS   (11.7)
20231206 070330 worker: Kernel    (6.1.21-v7+ #1642)
20231206 070330 worker: Procarch  (armv7l, 32-bit)
20231206 070330 worker: MPD ver   (0.23.12)
20231206 070330 worker: CPU gov   (ondemand)
20231206 070330 worker: Userid    (pi)
20231206 070330 worker: Homedir   (/home/pi)
20231206 070330 worker: Timezone  (Europe/Paris)
20231206 070330 worker: Keyboard  (fr)
20231206 070331 worker: USB boot  (not enabled yet)
20231206 070331 worker: File sys  (expanded)
20231206 070331 worker: HDMI port (Off)
20231206 070331 worker: Sys LED0  (On)
20231206 070331 worker: Sys LED1  (On)
20231206 070331 worker: --
20231206 070331 worker: -- Network
20231206 070331 worker: --
20231206 070331 worker: eth0 adapter exists
20231206 070331 worker: eth0 address check (Off)
20231206 070331 worker: IP addr (192.168.0.9)
20231206 070331 worker: Netmask (255.255.255.0)
20231206 070331 worker: Gateway (192.168.0.1)
20231206 070331 worker: Pri DNS (192.168.0.1)
20231206 070331 worker: Domain  (lan)
20231206 070331 worker: wlan0 adapter exists
20231206 070331 worker: wlan0 country (US)
20231206 070331 worker: wlan0 configured SSID (SFR_3E20)
20231206 070331 worker: wlan0 SSID alternates (None)
20231206 070331 worker: wlan0 router mode (Off)
20231206 070331 worker: wlan0 address check (up to 90 secs)
20231206 070335 worker: wlan0 connected to SSID (SFR_3E20)
20231206 070335 worker: wlan0 power save (Disabled)
20231206 070336 worker: IP addr (192.168.0.130)
20231206 070336 worker: Netmask (255.255.255.0)
20231206 070336 worker: Gateway (192.168.0.1)
20231206 070336 worker: Pri DNS (192.168.0.1)
20231206 070336 worker: Domain  (lan)
20231206 070336 worker: --
20231206 070336 worker: -- Software update
20231206 070336 worker: --
20231206 070336 worker: Automatic check (On)
20231206 070336 worker: Checking for available update...
20231206 070336 worker: Software is up to date
20231206 070336 worker: --
20231206 070336 worker: -- File sharing
20231206 070336 worker: --
20231206 070337 worker: SMB file sharing (On)
20231206 070337 worker: NFS file sharing (Off)
20231206 070337 worker: --
20231206 070337 worker: -- Audio config
20231206 070337 worker: --
20231206 070338 worker: MPD conf updated
20231206 070338 worker: ALSA card number (0)
20231206 070338 worker: MPD audio output (Audiophonics ES9028/9038 DAC)
20231206 070338 worker: Audio formats (S16_LE, S32_LE)
20231206 070338 worker: ALSA mixer name (Digital)
20231206 070338 worker: MPD mixer type (software)
20231206 070338 worker: Hdwr volume controller exists
20231206 070338 worker: Max ALSA volume (100%)
20231206 070338 worker: ALSA output mode (Direct)
20231206 070338 worker: ALSA loopback (Off)
20231206 070338 worker: Renderer active flags (reset)
20231206 070338 worker: CamillaDSP configuration (off)
20231206 070338 worker: --
20231206 070338 worker: -- MPD startup
20231206 070338 worker: --
20231206 070339 worker: MPD started
20231206 070339 worker: MPD accepting connections
20231206 070339 worker: MPD output 1 ALSA Default (On)
20231206 070339 worker: MPD output 2 ALSA Bluetooth (Off)
20231206 070339 worker: MPD output 3 HTTP Server (Off)
20231206 070339 worker: MPD crossfade (off)
20231206 070339 worker: MPD ignore CUE files (yes)
20231206 070339 worker: MPD camilladsp volume sync (Off)
20231206 070339 worker: MPD camilladsp volume range (60 dB)
20231206 070339 worker: --
20231206 070339 worker: -- Music sources
20231206 070339 worker: --
20231206 070339 worker: USB sources
20231206 070339 worker: No drives found
20231206 070339 worker: NAS sources
20231206 070339 worker: syno
20231206 070344 worker: Mount all submitted
20231206 070344 worker: --
20231206 070344 worker: -- Feature availability
20231206 070344 worker: --
20231206 070344 worker: Input select (available)
20231206 070344 worker: Input (MPD)
20231206 070344 worker: Output (Audiophonics ES9028/9038 DAC)
20231206 070344 worker: Bluetooth (available)
20231206 070357 worker: AirPlay renderer (available: started)
20231206 070357 worker: Spotify renderer (available)
20231206 070357 worker: Squeezelite (available)
20231206 070357 worker: RoonBridge renderer (not installed)
20231206 070357 worker: Multiroom sender (available)
20231206 070357 worker: Multiroom receiver (available)
20231206 070358 worker: UPnP renderer (available: started)
20231206 070358 worker: DLNA server (available)
20231206 070358 worker: GPIO button handler (available)
20231206 070358 worker: Stream recorder (n/a)
20231206 070358 worker: HTTPS-Only mode (n/a)
20231206 070358 worker: --
20231206 070358 worker: -- Other
20231206 070358 worker: --
20231206 070358 worker: USB volume knob (Off)
20231206 070358 worker: Shellinabox SSH started
20231206 070358 worker: USB auto-mounter (udisks-glue)
20231206 070358 worker: Saved MPD vol level (0)
20231206 070358 worker: Preamp volume level (0)
20231206 070358 worker: MPD volume level (58) restored
20231206 070358 worker: ALSA Digital volume (93%)
20231206 070358 worker: Auto-play (Off)
20231206 070359 worker: LocalUI (Off)
20231206 070359 worker: Automatic CoverView (Off)
20231206 070359 worker: On-screen keyboard (Off)
20231206 070359 worker: Library scope (recent)
20231206 070359 worker: Library active search (None)
20231206 070359 worker: View reset to (Playback)
20231206 070359 worker: Maintenance interval (360 minutes)
20231206 070359 worker: Screen saver activation (Never)
20231206 070359 worker: Session permissions (OK)
20231206 070359 worker: --
20231206 070359 worker: -- Startup complete
20231206 070359 worker: --
20231206 070359 worker: Mount monitor (off)
20231206 070359 worker: Watchdog monitor (started)
20231206 070359 worker: Responsiveness (Default)
20231206 070359 worker: Ready
Reply
#4
And now the start log with the volume type set to hardware (the previous log was with volume type = software) :

Code:
20231206 073644 worker: --
20231206 073644 worker: -- Start moOde 8 series
20231206 073644 worker: --
20231206 073644 worker: Successfully daemonized
20231206 073644 worker: Waiting for Linux startup...
20231206 073651 worker: Linux startup complete
20231206 073651 worker: Boot config backed up
20231206 073654 worker: File check (OK)
20231206 073655 worker: Session vacuumed
20231206 073655 worker: Session loaded
20231206 073655 worker: Debug logging (OFF)
20231206 073655 worker: Reduced system logging (OFF)
20231206 073655 worker: --
20231206 073655 worker: -- Audio debug
20231206 073655 worker: --
20231206 073655 worker: ALSA cards: (0:DAC | 1:empty | 2:empty | 3:empty
20231206 073655 worker: MPD config: (0:Audiophonics ES9028/9038 DAC | mixer:(Digital) | card:0)
20231206 073656 worker: ALSA mixer actual (Digital)
20231206 073656 worker: ALSA Digital volume set to (93%)
20231206 073656 worker: --
20231206 073656 worker: -- System
20231206 073656 worker: --
20231206 073658 worker: Host      (moode)
20231206 073658 worker: Hardware  (Pi-3B 1.2 1GB)
20231206 073658 worker: moOde     (8.3.6 2023-09-05)
20231206 073658 worker: RaspiOS   (11.7)
20231206 073658 worker: Kernel    (6.1.21-v7+ #1642)
20231206 073658 worker: Procarch  (armv7l, 32-bit)
20231206 073658 worker: MPD ver   (0.23.12)
20231206 073658 worker: CPU gov   (ondemand)
20231206 073658 worker: Userid    (pi)
20231206 073658 worker: Homedir   (/home/pi)
20231206 073658 worker: Timezone  (Europe/Paris)
20231206 073658 worker: Keyboard  (fr)
20231206 073659 worker: USB boot  (not enabled yet)
20231206 073659 worker: File sys  (expanded)
20231206 073659 worker: HDMI port (Off)
20231206 073659 worker: Sys LED0  (On)
20231206 073659 worker: Sys LED1  (On)
20231206 073659 worker: --
20231206 073659 worker: -- Network
20231206 073659 worker: --
20231206 073659 worker: eth0 adapter exists
20231206 073659 worker: eth0 address check (Off)
20231206 073659 worker: IP addr (192.168.0.9)
20231206 073659 worker: Netmask (255.255.255.0)
20231206 073659 worker: Gateway (192.168.0.1)
20231206 073659 worker: Pri DNS (192.168.0.1)
20231206 073659 worker: Domain  (lan)
20231206 073659 worker: wlan0 adapter exists
20231206 073659 worker: wlan0 country (US)
20231206 073659 worker: wlan0 configured SSID (SFR_3E20)
20231206 073659 worker: wlan0 SSID alternates (None)
20231206 073659 worker: wlan0 router mode (Off)
20231206 073659 worker: wlan0 address check (up to 90 secs)
20231206 073701 worker: wlan0 connected to SSID (SFR_3E20)
20231206 073701 worker: wlan0 power save (Disabled)
20231206 073701 worker: IP addr (192.168.0.130)
20231206 073701 worker: Netmask (255.255.255.0)
20231206 073701 worker: Gateway (192.168.0.1)
20231206 073702 worker: Pri DNS (192.168.0.1)
20231206 073702 worker: Domain  (lan)
20231206 073702 worker: --
20231206 073702 worker: -- Software update
20231206 073702 worker: --
20231206 073702 worker: Automatic check (On)
20231206 073702 worker: Checking for available update...
20231206 073702 worker: Software is up to date
20231206 073702 worker: --
20231206 073702 worker: -- File sharing
20231206 073702 worker: --
20231206 073703 worker: SMB file sharing (On)
20231206 073703 worker: NFS file sharing (Off)
20231206 073703 worker: --
20231206 073703 worker: -- Audio config
20231206 073703 worker: --
20231206 073703 worker: MPD conf updated
20231206 073703 worker: ALSA card number (0)
20231206 073703 worker: MPD audio output (Audiophonics ES9028/9038 DAC)
20231206 073704 worker: Audio formats (S16_LE, S32_LE)
20231206 073704 worker: ALSA mixer name (Digital)
20231206 073704 worker: MPD mixer type (hardware)
20231206 073704 worker: Hdwr volume controller exists
20231206 073704 worker: Max ALSA volume (100%)
20231206 073704 worker: ALSA output mode (Direct)
20231206 073704 worker: ALSA loopback (Off)
20231206 073704 worker: Renderer active flags (reset)
20231206 073704 worker: CamillaDSP configuration (off)
20231206 073704 worker: --
20231206 073704 worker: -- MPD startup
20231206 073704 worker: --
20231206 073705 worker: MPD started
20231206 073705 worker: MPD accepting connections
20231206 073705 worker: MPD output 1 ALSA Default (On)
20231206 073705 worker: MPD output 2 ALSA Bluetooth (Off)
20231206 073705 worker: MPD output 3 HTTP Server (Off)
20231206 073705 worker: MPD crossfade (off)
20231206 073705 worker: MPD ignore CUE files (yes)
20231206 073705 worker: MPD camilladsp volume sync (Off)
20231206 073705 worker: MPD camilladsp volume range (60 dB)
20231206 073705 worker: --
20231206 073705 worker: -- Music sources
20231206 073705 worker: --
20231206 073705 worker: USB sources
20231206 073705 worker: No drives found
20231206 073705 worker: NAS sources
20231206 073705 worker: syno
20231206 073709 worker: Mount all submitted
20231206 073709 worker: --
20231206 073709 worker: -- Feature availability
20231206 073709 worker: --
20231206 073709 worker: Input select (available)
20231206 073709 worker: Input (MPD)
20231206 073709 worker: Output (Audiophonics ES9028/9038 DAC)
20231206 073709 worker: Bluetooth (available)
20231206 073710 worker: AirPlay renderer (available: started)
20231206 073710 worker: Spotify renderer (available)
20231206 073710 worker: Squeezelite (available)
20231206 073710 worker: RoonBridge renderer (not installed)
20231206 073710 worker: Multiroom sender (available)
20231206 073710 worker: Multiroom receiver (available)
20231206 073710 worker: UPnP renderer (available: started)
20231206 073710 worker: DLNA server (available)
20231206 073710 worker: GPIO button handler (available)
20231206 073710 worker: Stream recorder (n/a)
20231206 073710 worker: HTTPS-Only mode (n/a)
20231206 073710 worker: --
20231206 073710 worker: -- Other
20231206 073710 worker: --
20231206 073710 worker: USB volume knob (Off)
20231206 073710 worker: Shellinabox SSH started
20231206 073710 worker: USB auto-mounter (udisks-glue)
20231206 073710 worker: Saved MPD vol level (0)
20231206 073710 worker: Preamp volume level (0)
20231206 073710 worker: MPD volume level (58) restored
20231206 073710 worker: ALSA Digital volume (93%)
20231206 073710 worker: Auto-play (Off)
20231206 073711 worker: LocalUI (Off)
20231206 073711 worker: Automatic CoverView (Off)
20231206 073711 worker: On-screen keyboard (Off)
20231206 073711 worker: Library scope (recent)
20231206 073711 worker: Library active search (None)
20231206 073711 worker: View reset to (Playback)
20231206 073711 worker: Maintenance interval (360 minutes)
20231206 073711 worker: Screen saver activation (Never)
20231206 073711 worker: Session permissions (OK)
20231206 073711 worker: --
20231206 073711 worker: -- Startup complete
20231206 073711 worker: --
20231206 073711 worker: Mount monitor (off)
20231206 073711 worker: Watchdog monitor (started)
20231206 073711 worker: Responsiveness (Default)
20231206 073711 worker: Ready
Reply
#5
I don't see anything suspicious in the log regarding the DAC configuration. I have one of the Audiophonics 9038 boards and ran a quick test yesterday and no issues whatsoever with Hardware volume.

What I do see in the log is that you have both Ethernet and WiFi interfaces active. It's best to have only one active network interface.
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#6
(12-06-2023, 11:39 AM)Tim Curtis Wrote: I don't see anything suspicious in the log regarding the DAC configuration. I have one of the Audiophonics 9038 boards and ran a quick test yesterday and no issues whatsoever with Hardware volume.

What I do see in the log is that you have both Ethernet and WiFi interfaces active. It's best to have only one active network interface.

He's on 32bit... could it be some driver incompatibility? Or fix that was tested only for 64bit? Only thinking loud, FWIW.

Cheers, Al.
Reply
#7
Hi and thanks to both of you !

For network interfaces : I can test with only one interface (preferably Ethernet), and check. I will keep you informed.

For 32bits : I confirm that I "had to stay in 32bit" : I tried twice to use moOde 64bit with my pi (3B 1.2 1GB) and the audiophonics ES9038Q2M I2S DAC, and did not manage to make it work appropriately. I supposed it could be a non-compatibility with the DAC (I read for example in the ES9038Q2M Sabre datasheet the feature "64-bit accumulator and 32-bit processor", which made me think maybe it had to work with a 32bit version of moOde ; maybe it's an error). I can retry installing the 64-bit version of moOde with the DAC and post a start log, if you think it can be useful.

Thanks again for your help !
Reply
#8
(12-06-2023, 01:24 PM)Benji Wrote: (I read for example in the ES9038Q2M Sabre datasheet the feature "64-bit accumulator and 32-bit processor", which made me think maybe it had to work with a 32bit version of moOde ; maybe it's an error).

I am concerned about the driver not being correctly written for one of the architectures. Those 64/32 things refer to the internal DAC for its own purposes, most probably regarding the XMOS chip (responsible mainly for the USB connection)

About only-one-interface: either disable the onboard wi-fi, or leave the ethernet cable disconnected (even easier)...
Reply
#9
(12-06-2023, 07:50 PM)Nutul Wrote:
(12-06-2023, 01:24 PM)Benji Wrote: (I read for example in the ES9038Q2M Sabre datasheet the feature "64-bit accumulator and 32-bit processor", which made me think maybe it had to work with a 32bit version of moOde ; maybe it's an error).

I am concerned about the driver not being correctly written for one of the architectures. Those 64/32 things refer to the internal DAC for its own purposes, most probably regarding the XMOS chip (responsible mainly for the USB connection)

About only-one-interface: either disable the onboard wi-fi, or leave the ethernet cable disconnected (even easier)...

The I2S drivers work same regardless of whether the 32-bit or 64-bit image is used, or which particular Pi is being used.

From the Download page:

64-bit - For models 3B/3B+, 3A+, 4, 400, CM3/CM3+ CM4, Zero 2W
32-bit - For models 1B/B+, 1A+, 2B, Zero
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#10
Hi,

2 tests performed tonight:

1 - with moOde 32bits : tried with wifi disabled, but no improvement. I insert hereafter the start log :

Code:
20231206 212012 worker: --
20231206 212012 worker: -- Start moOde 8 series
20231206 212012 worker: --
20231206 212012 worker: Successfully daemonized
20231206 212012 worker: Waiting for Linux startup...
20231206 212018 worker: Linux startup complete
20231206 212018 worker: Boot config backed up
20231206 212021 worker: File check (OK)
20231206 212023 worker: Session vacuumed
20231206 212023 worker: Session loaded
20231206 212023 worker: Debug logging (OFF)
20231206 212023 worker: Reduced system logging (OFF)
20231206 212023 worker: --
20231206 212023 worker: -- Audio debug
20231206 212023 worker: --
20231206 212023 worker: ALSA cards: (0:DAC | 1:empty | 2:empty | 3:empty
20231206 212023 worker: MPD config: (0:Audiophonics ES9028/9038 DAC | mixer:(Digital) | card:0)
20231206 212023 worker: ALSA mixer actual (Digital)
20231206 212023 worker: ALSA Digital volume set to (93%)
20231206 212023 worker: --
20231206 212023 worker: -- System
20231206 212023 worker: --
20231206 212026 worker: Host      (moode)
20231206 212026 worker: Hardware  (Pi-3B 1.2 1GB)
20231206 212026 worker: moOde     (8.3.6 2023-09-05)
20231206 212026 worker: RaspiOS   (11.7)
20231206 212026 worker: Kernel    (6.1.21-v7+ #1642)
20231206 212026 worker: Procarch  (armv7l, 32-bit)
20231206 212026 worker: MPD ver   (0.23.12)
20231206 212026 worker: CPU gov   (ondemand)
20231206 212026 worker: Userid    (pi)
20231206 212026 worker: Homedir   (/home/pi)
20231206 212026 worker: Timezone  (Europe/Paris)
20231206 212026 worker: Keyboard  (fr)
20231206 212026 worker: USB boot  (not enabled yet)
20231206 212026 worker: File sys  (expanded)
20231206 212026 worker: HDMI port (Off)
20231206 212026 worker: Sys LED0  (On)
20231206 212026 worker: Sys LED1  (On)
20231206 212026 worker: --
20231206 212026 worker: -- Network
20231206 212026 worker: --
20231206 212027 worker: eth0 adapter exists
20231206 212027 worker: eth0 address check (Off)
20231206 212027 worker: IP addr (192.168.0.9)
20231206 212027 worker: Netmask (255.255.255.0)
20231206 212027 worker: Gateway (192.168.0.1)
20231206 212027 worker: Pri DNS (192.168.0.1)
20231206 212027 worker: Domain  (lan)
20231206 212027 worker: wlan0 adapter does not exist
20231206 212027 worker: --
20231206 212027 worker: -- Software update
20231206 212027 worker: --
20231206 212027 worker: Automatic check (On)
20231206 212027 worker: Checking for available update...
20231206 212028 worker: Software is up to date
20231206 212028 worker: --
20231206 212028 worker: -- File sharing
20231206 212028 worker: --
20231206 212029 worker: SMB file sharing (On)
20231206 212029 worker: NFS file sharing (Off)
20231206 212029 worker: --
20231206 212029 worker: -- Audio config
20231206 212029 worker: --
20231206 212030 worker: MPD conf updated
20231206 212030 worker: ALSA card number (0)
20231206 212030 worker: MPD audio output (Audiophonics ES9028/9038 DAC)
20231206 212030 worker: Audio formats (S16_LE, S32_LE)
20231206 212030 worker: ALSA mixer name (Digital)
20231206 212030 worker: MPD mixer type (hardware)
20231206 212030 worker: Hdwr volume controller exists
20231206 212030 worker: Max ALSA volume (100%)
20231206 212030 worker: ALSA output mode (Direct)
20231206 212030 worker: ALSA loopback (Off)
20231206 212030 worker: Renderer active flags (reset)
20231206 212030 worker: CamillaDSP configuration (off)
20231206 212030 worker: --
20231206 212030 worker: -- MPD startup
20231206 212030 worker: --
20231206 212031 worker: MPD started
20231206 212031 worker: MPD accepting connections
20231206 212031 worker: MPD output 1 ALSA Default (On)
20231206 212031 worker: MPD output 2 ALSA Bluetooth (Off)
20231206 212031 worker: MPD output 3 HTTP Server (Off)
20231206 212031 worker: MPD crossfade (off)
20231206 212031 worker: MPD ignore CUE files (yes)
20231206 212031 worker: MPD camilladsp volume sync (Off)
20231206 212031 worker: MPD camilladsp volume range (60 dB)
20231206 212031 worker: --
20231206 212031 worker: -- Music sources
20231206 212031 worker: --
20231206 212031 worker: USB sources
20231206 212031 worker: No drives found
20231206 212031 worker: NAS sources
20231206 212031 worker: syno
20231206 212035 worker: Mount all submitted
20231206 212035 worker: --
20231206 212035 worker: -- Feature availability
20231206 212035 worker: --
20231206 212035 worker: Input select (available)
20231206 212035 worker: Input (MPD)
20231206 212035 worker: Output (Audiophonics ES9028/9038 DAC)
20231206 212035 worker: Bluetooth (available)
20231206 212036 worker: AirPlay renderer (available: started)
20231206 212036 worker: Spotify renderer (available)
20231206 212036 worker: Squeezelite (available)
20231206 212036 worker: RoonBridge renderer (not installed)
20231206 212036 worker: Multiroom sender (available)
20231206 212036 worker: Multiroom receiver (available)
20231206 212036 worker: UPnP renderer (available: started)
20231206 212036 worker: DLNA server (available)
20231206 212036 worker: GPIO button handler (available)
20231206 212036 worker: Stream recorder (n/a)
20231206 212036 worker: HTTPS-Only mode (n/a)
20231206 212036 worker: --
20231206 212036 worker: -- Other
20231206 212036 worker: --
20231206 212036 worker: USB volume knob (Off)
20231206 212036 worker: Shellinabox SSH started
20231206 212036 worker: USB auto-mounter (udisks-glue)
20231206 212036 worker: Saved MPD vol level (0)
20231206 212036 worker: Preamp volume level (0)
20231206 212036 worker: MPD volume level (69) restored
20231206 212036 worker: ALSA Digital volume (93%)
20231206 212036 worker: Auto-play (Off)
20231206 212037 worker: LocalUI (Off)
20231206 212037 worker: Automatic CoverView (Off)
20231206 212037 worker: On-screen keyboard (Off)
20231206 212037 worker: Library scope (recent)
20231206 212037 worker: Library active search (None)
20231206 212037 worker: View reset to (Playback)
20231206 212037 worker: Maintenance interval (360 minutes)
20231206 212037 worker: Screen saver activation (Never)
20231206 212038 worker: Session permissions (OK)
20231206 212038 worker: --
20231206 212038 worker: -- Startup complete
20231206 212038 worker: --
20231206 212038 worker: Mount monitor (off)
20231206 212038 worker: Watchdog monitor (started)
20231206 212038 worker: Responsiveness (Default)
20231206 212038 worker: Ready

Any idea why there is "audio debug" at the beginning (maybe normal) ? and I read also MPD volume level (69) restored, but no idea if it's related to my issue.

2 - with moOde 64bits: again, impossible to make moOde and the DAC work properly, even though the raspberry pi is a 3B 1.2. I can't set the driver to audiophonics ES9028/9038, neither select the i-sabre-q2m: the "SET" buttons for these parameters don't work, and when I want to go to system settings (among others to download a start log), impossible to enter in these system settings. The system does not work normally at all when I install the 64bits version of moOde with my hardware Pi 3B 1.2 + DAC audiophonics I-Sabre ES9038Q2M, and I'm unable to state if it's normal.

I bought the DAC a few days ago, could it be related to a hardware problem ? at this stage, I don't understand :
- why hardware volume setting seems to work with Volumio and not moOde,
- why the system does not want to work with a 64bits version of moOde,
- and why, nevertheless, it seems to work properly with moOde 32bits (except volume type which has to be defined to "software", to work properly).

Sorry for this strange case, and thanks for your help,

Benji
Reply


Forum Jump: