+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7)
+--- Thread: Official moOde 8 support thread (/showthread.php?tid=4777)
RE: Official moOde 8 support thread - Tim Curtis - 03-20-2022
Coffee is life, lol
RE: Official moOde 8 support thread - BlackSmile - 03-20-2022
(03-20-2022, 12:36 AM)Tim Curtis Wrote:(03-19-2022, 11:56 PM)BlackSmile Wrote: Hello Tim,
Try to install new 8.0.1 version tonight but commands :
Code:gpio readall
is not found anymore. Is it a normal behavior or a regression ?
It use to work before, so now stuck with my little scripts.
What need to be install ? WiringPi seems not to be supported anymore (wrong?).
I also have samba problems and cannot mount my music sources (error 115). I haven't found any solution to this for now.
Any clue ?
Tank you for support
Right, WiringPi is a long since deprecated project and so not supported anymore in moOde.
http://wiringpi.com/wiringpi-deprecated/
The new Linux kernels don't support NTLM for Samba mounts due to security issues. I don't know if this is what is causing your issue though.
Thk, so what should be the best solution to replace my little script command with gpio commands :
Code:
gpio -g mode 04 out
gpio -g write 04 0
gpio -g mode 17 in
gpio -g write 17 0
gpio -g mode 22 out
gpio -g write 22 1
while [ 1 ]; do
if [ "$(gpio -g read 17)" = "1" ]; then
echo "Setting pin GPIO4 High"
gpio mode 7 out
gpio write 7 1
/bin/sleep 1
echo "Setting pin GPIO4 Low"
gpio write 7 0
echo "RaspberryPi shutdown"
mpc stop
systemctl stop nginx
poweroff
break
fi
/bin/sleep 0.25
done
exit 0RE: Official moOde 8 support thread - zOr7gA8 - 03-20-2022
Hi all,
thanks to @Tim Curtis and contributors for providing a new major version.
Setting up with backup/restore worked fine here on RPI 3A+.
Noticed that some settings in "mpd.service" disappeared. But I think they aren't longer necessary.
Composer begin with A, An, the etc - El bubar - 03-20-2022
Bonjour
ai posté ici par erreur :
https://moodeaudio.org/forum/showthread.php?tid=4633
thank
another little regression , I believe, about the audio information windows : the "playback" tab is inacessible (click on it doesn't work
)
RE: Official moOde 8 support thread - Tim Curtis - 03-20-2022
(03-20-2022, 08:00 AM)BlackSmile Wrote:(03-20-2022, 12:36 AM)Tim Curtis Wrote:(03-19-2022, 11:56 PM)BlackSmile Wrote: Hello Tim,
Try to install new 8.0.1 version tonight but commands :
Code:gpio readall
is not found anymore. Is it a normal behavior or a regression ?
It use to work before, so now stuck with my little scripts.
What need to be install ? WiringPi seems not to be supported anymore (wrong?).
I also have samba problems and cannot mount my music sources (error 115). I haven't found any solution to this for now.
Any clue ?
Tank you for support
Right, WiringPi is a long since deprecated project and so not supported anymore in moOde.
http://wiringpi.com/wiringpi-deprecated/
The new Linux kernels don't support NTLM for Samba mounts due to security issues. I don't know if this is what is causing your issue though.
Thk, so what should be the best solution to replace my little script command with gpio commands :
Code:gpio -g mode 04 out
gpio -g write 04 0
gpio -g mode 17 in
gpio -g write 17 0
gpio -g mode 22 out
gpio -g write 22 1
while [ 1 ]; do
if [ "$(gpio -g read 17)" = "1" ]; then
echo "Setting pin GPIO4 High"
gpio mode 7 out
gpio write 7 1
/bin/sleep 1
echo "Setting pin GPIO4 Low"
gpio write 7 0
echo "RaspberryPi shutdown"
mpc stop
systemctl stop nginx
poweroff
break
fi
/bin/sleep 0.25
done
exit 0
You will prolly need to rewrite the script in Python.
moOde includes RPi.GPIO version 0.70
https://pypi.org/project/RPi.GPIO/
RE: Composer begin with A, An, the etc - Tim Curtis - 03-20-2022
(03-20-2022, 09:17 AM)El bubar Wrote: Bonjour
ai posté ici par erreur :
https://moodeaudio.org/forum/showthread.php?tid=4633
thank
another little regression , I believe, about the audio information windows : the "playback" tab is inacessible (click on it doesn't work
Clear Browser cache
DSD blues - cofot28 - 03-20-2022
Hi!
In the new 8.0 and 8.01 Moode OS versions, I have persistent problems with DSD files either in the default or the direct output mode position.
In my PS Loxje D50 (DSD Dac) reading DSD produces a strong white noise with the signal at a much lower level while in an other dac. In the PS Audio Dig. Link III (not a DSD Dac), there is an erratic behaviour. Sometimes succeeds the conversion but some other times there are the same symptoms as with Loxje Dac. I should add that both dacs are recognised and behave excellently with all the rest of the content either in flac or mp3.
Please note that I did not have any of these problems with the 7.x versions.
Does anyone else experience similar issues with DSD in the new OS?
Is it something that can be addressed in future updates?
with my acknowledgements for your brilliant work,
Cofot
RE: Official moOde 8 support thread - Tim Curtis - 03-20-2022
I ran a quick test with some DSF files at DSD64, 128 and 256 rates and no issues playing to USB connected Allo Revolution DAC. MPD set to Native DSD or DoP, ALSA output mode plughw or hw.
IIRC white noise when playing DSD is caused by having MPD set to DoP but the audio device not supporting DoP.
RE: DSD blues - MikeyFresh - 03-20-2022
(03-20-2022, 12:05 PM)cofot28 Wrote: Hi!
In the new 8.0 and 8.01 Moode OS versions, I have persistent problems with DSD files either in the default or the direct output mode position.
In my PS Loxje D50 (DSD Dac) reading DSD produces a strong white noise with the signal at a much lower level while in an other dac. In the PS Audio Dig. Link III (not a DSD Dac), there is an erratic behaviour. Sometimes succeeds the conversion but some other times there are the same symptoms as with Loxje Dac. I should add that both dacs are recognised and behave excellently with all the rest of the content either in flac or mp3.
Please note that I did not have any of these problems with the 7.x versions.
Does anyone else experience similar issues with DSD in the new OS?
Is it something that can be addressed in future updates?
with my acknowledgements for your brilliant work,
Cofot
No problems on my end with DSD64/128 on a Topping D30 Pro with Native DSD (Default) setting in MPD.
Overlay issue? - Marrahm - 03-20-2022
Pi with the HifiBerry HD DAC. Everything worked perfectly under M7 using Tim’s overlay fix. But using same overlay and config in v8 gives me an ALSA error:
Failed to open "ALSA Default" (alsa); Failed to open ALSA device "_audioout": No such file or directory
Which log should I be looking into for clues?
I don’t know if this is relevant or not, but I swear v7 did not call the HD DAC an I2S dac, but v8 seems to automatically select that when I select the proper overlay.
Thanks,
Mike