+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7)
+--- Thread: Official moOde 7.0.1 support thread (/showthread.php?tid=3290)
RE: Official moOde 7.0.1 support thread - lamode - 12-24-2020
Next beginner question...
Any idea why I might be getting missing image icons on the playlist when using Moode in UPnP mode? I'm using Audirvana 3.5.43 (Mac) as the source, in case that helps.
![[Image: 98N1nK5.jpg]](https://i.imgur.com/98N1nK5.jpg)
RE: Official moOde 7.0.1 support thread - vinnn - 12-24-2020
(12-24-2020, 01:12 AM)Tim Curtis Wrote: @vinnn,
Regarding the "Battles" album MPD reports the tags below. Note that there is no OriginalArtist tag and the Artist and Performer tags are same which is not right.
Code:pi@rp2:~ $ telnet localhost 6600
Trying ::1...
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
OK MPD 0.22.0
lsinfo "USB/VFAT128/Test_mixed/Battles - B EP (2004, EP) [FLAC]/01 Battles - SZ2.flac"
file: USB/VFAT128/Test_mixed/Battles - B EP (2004, EP) [FLAC]/01 Battles - SZ2.flac
Last-Modified: 2020-02-27T09:41:06Z
Format: 44100:16:2
Time: 559
duration: 559.133
Title: SZ2
Artist: Battles
Album: B EP
Date: 2004
Track: 1
Genre: Math Rock
Performer: Battles
OK
Thanks for looking Tim,
I was going from what was being shown in Easytag but yes after also looking in mp3tag and a couple of players turns out it is actually the performer flac tag not the original artist tag (turns out this is an ID3 only tag so couldn't have been a flac tag anyway) must be an Easytag display quirk.
Still, whether it's a performer tag or other tag its presence shouldn't break the displayed artist or album artist. Every player under the sun including mpd assumes the artist tag as the album artist unless there's also an album artist tag which takes precedence, this behaviour is now broken in v7 web UI.
The code is picking up multiple tags instead of just artist which for example creates an artist name of "ZZ Top, ZZ top" instead of "ZZ Top". This then breaks the logic that evaluates whether album artist should be Unknown AlbumArtist.
HTH
RE: Official moOde 7.0.1 support thread - Tim Curtis - 12-24-2020
@lamode, Here's the "About" menu item.
[attachment=1993] [attachment=1994]
Queue thumbs are only supported for moOde radio stations and Library content (MPD database). The UPnP stack used in moOde only supports fetching the cover image for the song file. Theres no API to fetch a thumbnail image.
RE: Official moOde 7.0.1 support thread - Tim Curtis - 12-24-2020
(12-24-2020, 04:51 PM)vinnn Wrote:(12-24-2020, 01:12 AM)Tim Curtis Wrote: @vinnn,
Regarding the "Battles" album MPD reports the tags below. Note that there is no OriginalArtist tag and the Artist and Performer tags are same which is not right.
Code:pi@rp2:~ $ telnet localhost 6600
Trying ::1...
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
OK MPD 0.22.0
lsinfo "USB/VFAT128/Test_mixed/Battles - B EP (2004, EP) [FLAC]/01 Battles - SZ2.flac"
file: USB/VFAT128/Test_mixed/Battles - B EP (2004, EP) [FLAC]/01 Battles - SZ2.flac
Last-Modified: 2020-02-27T09:41:06Z
Format: 44100:16:2
Time: 559
duration: 559.133
Title: SZ2
Artist: Battles
Album: B EP
Date: 2004
Track: 1
Genre: Math Rock
Performer: Battles
OK
Thanks for looking Tim,
I was going from what was being shown in Easytag but yes after also looking in mp3tag and a couple of players turns out it is actually the performer flac tag not the original artist tag (turns out this is an ID3 only tag so couldn't have been a flac tag anyway) must be an Easytag display quirk.
Still, whether it's a performer tag or other tag its presence shouldn't break the displayed artist or album artist. Every player under the sun including mpd assumes the artist tag as the album artist unless there's also an album artist tag which takes precedence, this behaviour is now broken in v7 web UI.
The code is picking up multiple tags instead of just artist which for example creates an artist name of "ZZ Top, ZZ top" instead of "ZZ Top". This then breaks the logic that evaluates whether album artist should be Unknown AlbumArtist.
HTH
The code now handles multiple occurrences of Genre, Artist, Performer and Conductor tags and considers Artist, Performer and Conductor as all being "artists" which they are. This approach supports Classical collections which are often tagged with multiples, and it still supports Pop collections which normally only have a single Genre, Artist, AlbumArtist tag.
When there are multiple "artists" present it's not possible to determine which one is the AlbumArtist if no AlbumArtist tag exists.
In your test album The same value is assigned to Performer and Artist tags and thus we have multiple "artists", and there is no AlbumArtist tag. This is what results in "Unknown AlbumArtist".
I don't quite understand why the tagging utility creates both a Performer and an Artist tag with the same value. Is this a common practice?
-Tim
RE: Official moOde 7.0.1 support thread - MikeyFresh - 12-24-2020
Good evening and Happy Holidays!
I applied 7.0.1 as an in-place update just now, and after rebooting the unit, the System Info is still showing this new 4B 2GB board as an Unknown Pi-model. As such there is also no integrated WiFi/BT switch.
Any other commands or patches I can try?
RE: Official moOde 7.0.1 support thread - Tim Curtis - 12-24-2020
Post output from the command below.
Code:
cat /proc/cpuinfoRE: Official moOde 7.0.1 support thread - MikeyFresh - 12-24-2020
(12-24-2020, 11:37 PM)Tim Curtis Wrote: Post output from the command below.
Code:cat /proc/cpuinfo
Code:
processor : 0 processor : 0
model name : ARMv7 Processor rev 3 (v7l)
BogoMIPS : 108.00
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd08
CPU revision : 3
processor : 1
model name : ARMv7 Processor rev 3 (v7l)
BogoMIPS : 108.00
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd08
CPU revision : 3
processor : 2
model name : ARMv7 Processor rev 3 (v7l)
BogoMIPS : 108.00
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd08
CPU revision : 3
processor : 3
model name : ARMv7 Processor rev 3 (v7l)
BogoMIPS : 108.00
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd08
CPU revision : 3
Hardware : BCM2711
Revision : b03114
Serial : 10000000cc971d1d
Model : Raspberry Pi 4 Model B Rev 1.4
pi@moode:~ $
model name : ARMv7 Processor rev 3 (v7l)
BogoMIPS : 108.00
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd08
CPU revision : 3
processor : 1
model name : ARMv7 Processor rev 3 (v7l)
BogoMIPS : 108.00
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd08
CPU revision : 3
processor : 2
model name : ARMv7 Processor rev 3 (v7l)
BogoMIPS : 108.00
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd08
CPU revision : 3
processor : 3
model name : ARMv7 Processor rev 3 (v7l)
BogoMIPS : 108.00
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd08
CPU revision : 3
Hardware : BCM2711
Revision : b03114
Serial : 10000000cc971d1d
Model : Raspberry Pi 4 Model B Rev 1.4 RE: Official moOde 7.0.1 support thread - fdealexa - 12-25-2020
Merry Christmas to everybody
RE: Official moOde 7.0.1 support thread - fdealexa - 12-25-2020
Hello everybody,
first of all thanks for the wonderfull new version: it is very nice.
I have imported the old user radios (thanks to Kent for the "loadmyradios7") but, unfortunatelly, thanks to new default radios and the new bigger record layout, the exported file (stations.zip) become larger than 90MB.
Would you please so kind to help me to modify the parameters and the import function to solve my problem?
Thanks in advance and best regards,
Francesco
RE: Official moOde 7.0.1 support thread - DJ XtAzT - 12-25-2020
Happy holidays!! Loving this new update.
Quick question. Is browse by folder view supposed to look like this? I often see these duplicates, and if I attempt to play the one with the album art, it doesn't actually play or just plays a different track. I often had to play the one with a time duration.
[attachment=1996]
Also is there a way to sort that view base on the Title of the track?