Moode Forum
Official moOde 7.0.1 support thread - Printable Version

+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7)
+--- Thread: Official moOde 7.0.1 support thread (/showthread.php?tid=3290)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37


RE: Official moOde 7.0.1 support thread - Tim Curtis - 01-21-2021

(01-21-2021, 07:46 AM)cirrower Wrote: Hi,

If the result of a search shows nothing, Moode shows obviously "Nothing found", but there's also a thumbnail of a missing image .
I attach a screenshot.

Thanks.

It's not obvious to me whats happening. Below is what should be displayed when a search results in "Not found".

[attachment=2067]


RE: Official moOde 7.0.1 support thread - Tim Curtis - 01-21-2021

(01-21-2021, 09:15 AM)EkTurco Wrote:
(01-20-2021, 01:51 PM)Tim Curtis Wrote: Examine the Moode startup log and MPD log for errors.

Code:
moodeutl -l

cat /var/log/mpd/log

Also check resource usage for any issues with free RAM and disk space

Code:
moodeutl -m

Dear Tim, here is the LOgs, thanks in advance !

Code:
login as: pi
pi@192.168.1.75's password:
RaspiOS 10.6 | 5.4.77-v7+ #1371 | armv7l (32-bit)

                     ____     __        ____
         __ _  ___  / __ \___/ /__     /_  /
        /  ' \/ _ \/ /_/ / _  / -_)     / /
       /_/_/_/\___/\____/\_,_/\__/     /_/

                moOde audio player
             Release 7.0.1 2020-12-23
               (C) 2014 Tim Curtis


The programs included with moOde are free software; the
exact distribution terms for each program are described
in the individual files in /usr/share/doc/*/copyright.
Moode comes with absolutely no warranties expressed or
implied, or any other guarantees.

Last login: Wed Dec 23 15:43:42 2020 from 192.168.1.34
pi@moode:~ $ moodeutl -l
20201223 152304 worker: -- Start
20201223 152304 worker: Successfully daemonized
20201223 152304 worker: Integrity check (passed)
20201223 152306 worker: File check (OK)
20201223 152306 worker: Session loaded
20201223 152306 worker: Debug logging (OFF)
20201223 152306 worker: -- Device
20201223 152306 worker: ALSA cards: (0:sndrpihifiberry | 1:empty | 2:empty | 3:empty
20201223 152306 worker: Configured: (0:HiFiBerry Digi(Digi+) | mixer:(none) | alsavol:none)
20201223 152306 worker: ALSA mixer actual (none)
20201223 152306 worker: ALSA volume (none)
20201223 152306 worker: -- System
20201223 152309 worker: Host     (moode)
20201223 152309 worker: moOde    (7.0.1 2020-12-23)
20201223 152309 worker: RaspiOS  (10.6)
20201223 152309 worker: Kernel   (5.4.77-v7+ #1371)
20201223 152309 worker: Platform (Pi-3B 1GB v1.2)
20201223 152309 worker: ARM arch (armv7l, 32-bit kernel)
20201223 152309 worker: MPD ver  (0.22.3_p0x3)
20201223 152309 worker: CPU gov  (ondemand)
20201223 152309 worker: USB boot not enabled yet
20201223 152309 worker: File system not expanded yet
20201223 152309 worker: HDMI port on
20201223 152309 worker: -- Network
20201223 152309 worker: eth0 exists
20201223 152309 worker: eth0 wait 0 for IP address
20201223 152312 worker: eth0 wait 1 for IP address
20201223 152315 worker: eth0 wait 2 for IP address
20201223 152318 worker: eth0 wait 3 for IP address
20201223 152322 worker: eth0 wait 4 for IP address
20201223 152325 worker: eth0 address not assigned
20201223 152325 worker: wlan0 exists
20201223 152325 worker: wifi country (US)
20201223 152325 worker: wlan0 trying SSID (SUPERONLINE_WiFi_1579)
20201223 152325 worker: IP addr (192.168.1.75)
20201223 152325 worker: Netmask (255.255.255.0)
20201223 152325 worker: Gateway (0.0.0.0)
20201223 152325 worker: Pri DNS ()
20201223 152325 worker: Domain  (None)
20201223 152325 worker: -- Audio
20201223 152325 worker: MPD conf updated
20201223 152326 worker: ALSA outputs unmuted
20201223 152326 worker: ALSA card number (0)
20201223 152326 worker: Audio output (HiFiBerry Digi(Digi+))
20201223 152326 worker: Audio formats (S16_LE, S24_LE)
20201223 152326 worker: ALSA mixer name (none)
20201223 152326 worker: MPD volume control (software)
20201223 152326 worker: Hdwr volume controller not detected
20201223 152326 worker: Reset renderer active flags
20201223 152326 worker: -- MPD
20201223 152326 worker: MPD started
20201223 152329 worker: MPD accepting connections
20201223 152329 worker: Configure MPD outputs
20201223 152329 worker: MPD output 1 ALSA default (on)
20201223 152329 worker: MPD output 2 ALSA crossfeed (off)
20201223 152329 worker: MPD output 3 ALSA parametric eq (off)
20201223 152329 worker: MPD output 4 ALSA graphic eq (off)
20201223 152329 worker: MPD output 5 ALSA polarity inversion (off)
20201223 152329 worker: MPD output 6 ALSA bluetooth (off)
20201223 152329 worker: MPD output 7 HTTP stream (off)
20201223 152329 worker: MPD crossfade (off)
20201223 152329 worker: -- Feature availability
20201223 152329 worker: Source select (available)
20201223 152329 worker: Source select (source: MPD)
20201223 152329 worker: Source select (output: HiFiBerry Digi(Digi+))
20201223 152329 worker: Bluetooth (available)
20201223 152329 worker: Airplay renderer (available)
20201223 152329 worker: Spotify renderer (available)
20201223 152329 worker: Squeezelite renderer (available)
20201223 152329 worker: UPnP renderer (available)
20201223 152329 worker: DLNA server (available)
20201223 152329 worker: UPnP browser (available)
20201223 152329 worker: GPIO button handler (available)
20201223 152329 worker: Stream recorder (n/a)
20201223 152329 worker: -- Music sources
20201223 152329 worker: USB source (SAMSUNG)
20201223 152329 worker: NAS and UPnP sources (none configured)
20201223 152329 worker: -- Miscellaneous
20201223 152329 worker: USB volume knob (Off)
20201223 152329 worker: USB auto-mounter (udisks-glue)
20201223 152329 worker: LED0 (On)
20201223 152329 worker: LED1 (On)
20201223 152329 worker: Saved MPD vol level (0)
20201223 152329 worker: Preamp volume level (0)
20201223 152330 worker: MPD volume level (7) restored
20201223 152330 worker: ALSA volume level (None)
20201223 152330 worker: Auto-play (Off)
20201223 152330 worker: Maintenance interval (3 hrs)
20201223 152330 worker: Screen saver activation (Never)
20201223 152330 worker: Session permissions (OK)
20201223 152330 worker: Watchdog started
20201223 152330 worker: Ready
.
.
.
pi@moode:~ $

Code:
CPU: 1.2 GHz | LOAD: 33% | TEMP: 38°C | RAM_USED: 33% | DISK_USED: 83% | DISK_FREE: 562M | FPM_POOL: 8 workers

The log entries below indicate a broken network config. Typically the Gateway and Primary DNS addresses are set to the Router LAN address.

Code:
20201223 152325 worker: Gateway (0.0.0.0)
20201223 152325 worker: Pri DNS ()



RE: Official moOde 7.0.1 support thread - cirrower - 01-21-2021

(01-21-2021, 12:18 PM)Tim Curtis Wrote:
(01-21-2021, 07:46 AM)cirrower Wrote: Hi,

If the result of a search shows nothing, Moode shows obviously "Nothing found", but there's also a thumbnail of a missing image .
I attach a screenshot.

Thanks.

It's not obvious to me whats happening. Below is what should be displayed when a search results in "Not found".

I've regenerated the thumbnail cache and the notfound.jpg thumbnail (0.jpg) file hasn't been generated.
It's not important, I've just copied notfound.jpg as 0.jpg and it's done, but I'm afraid that I'll need to do that every time the thumbnails are regenerated.

I'll have a look to thmcache.php mentioned in other post, I also experience the laggy behavior with 400px thumbnails, and nearly 5000 albums. May be I can see why it hasn't been created.

By the way, my laggy behavior it's clearly related with the number of albums shown at once, if I filter by genre everything goes smooth.

Thanks, anyway.


RE: Official moOde 7.0.1 support thread - TheOldPresbyope - 01-21-2021

@cirrower 


Quote:I've regenerated the thumbnail cache and the notfound.jpg thumbnail (0.jpg) file hasn't been generated.


This is what is not obvious. There shouldn't be any '0.jpg' file generated. If you look at the snippet Tim posted in his screen capture you'll see that 'images/default-cover-v6.jpg' is substituted for it as part of the 'Nothing found' code. The absolute path of this image is /var/www/images/default-cover-v6.jpg'.

Regards,
Kent


RE: Official moOde 7.0.1 support thread - cirrower - 01-21-2021

(01-21-2021, 02:40 PM)TheOldPresbyope Wrote: @cirrower 


Quote:I've regenerated the thumbnail cache and the notfound.jpg thumbnail (0.jpg) file hasn't been generated.


This is what is not obvious. There shouldn't be any '0.jpg' file generated. If you look at the snippet Tim posted in his screen capture you'll see that 'images/default-cover-v6.jpg' is substituted for it as part of the 'Nothing found' code. The absolute path of this image is /var/www/images/default-cover-v6.jpg'.

Regards,
Kent

Hi,

I've seen it now, but surprisingly in my rendered code the src tag points to 0.jpg!!!
In case it helps my browser is Brave, Chromium based, on a Windows 10 machine.

Regards.


RE: Official moOde 7.0.1 support thread - lukivision - 01-21-2021

Hi everybody,
there's an issue with 7.01 in my environment using Moode via Upnp just as a renderer. Both Foobar and Jriver cannot use the fine 1db-step volume knob of Moode from their interfaces. Instead it goes in 5 db steps. It means, they show 1 db-steps, but only after 5 steps a change (of then 5 steps) happens. So the difference is too big. This is not the case, if I use the volume knob of the Moode UI. Maybe it has something to do with Upnp? I came from Moode 3.8 and there all was fine.

Btw: I tried all versions of Moode since then but did not use them for sound quality reasons. Now 7.01 is the best sounding version ever and I'm very happy with it. Maybe it's the MPD...

Thanx in advance

Luki


RE: Official moOde 7.0.1 support thread - Tim Curtis - 01-21-2021

(01-21-2021, 03:08 PM)cirrower Wrote:
(01-21-2021, 02:40 PM)TheOldPresbyope Wrote: @cirrower 


Quote:I've regenerated the thumbnail cache and the notfound.jpg thumbnail (0.jpg) file hasn't been generated.


This is what is not obvious. There shouldn't be any '0.jpg' file generated. If you look at the snippet Tim posted in his screen capture you'll see that 'images/default-cover-v6.jpg' is substituted for it as part of the 'Nothing found' code. The absolute path of this image is /var/www/images/default-cover-v6.jpg'.

Regards,
Kent

Hi,

I've seen it now, but surprisingly in my rendered code the src tag points to 0.jpg!!!
In case it helps my browser is Brave, Chromium based, on a Windows 10 machine.

Regards.

I can repro with chrome. A fix will be in upcoming 7.1.0


RE: Official moOde 7.0.1 support thread - cirrower - 01-21-2021

(01-21-2021, 04:12 PM)Tim Curtis Wrote:
(01-21-2021, 03:08 PM)cirrower Wrote:
(01-21-2021, 02:40 PM)TheOldPresbyope Wrote: @cirrower 


Quote:I've regenerated the thumbnail cache and the notfound.jpg thumbnail (0.jpg) file hasn't been generated.


This is what is not obvious. There shouldn't be any '0.jpg' file generated. If you look at the snippet Tim posted in his screen capture you'll see that 'images/default-cover-v6.jpg' is substituted for it as part of the 'Nothing found' code. The absolute path of this image is /var/www/images/default-cover-v6.jpg'.

Regards,
Kent

Hi,

I've seen it now, but surprisingly in my rendered code the src tag points to 0.jpg!!!
In case it helps my browser is Brave, Chromium based, on a Windows 10 machine.

Regards.

I can repro with chrome. A fix will be in upcoming 7.1.0

Great! Thanks!


RE: Official moOde 7.0.1 support thread - beeper - 01-23-2021

Hi,

i have a little problem with one of my moode installations. I am using the Raspberry Pi Zero wh. I have created a music source in the library settings to connect to a nfs devices (Windows with nfs enabled). On 3 devices, nearly the same configuration, it works very well. But on one device I get some strange folders in the library view. I have attached 2 images to show you what happens.

Any ideas?
Thanks a lot


RE: Official moOde 7.0.1 support thread - Tim Curtis - 01-23-2021

Very odd issue but the .@GMT bla bla folders are linux hidden files/folders otherwise known as dot files. They would have been created on your NFS box by some utility or app, I dunno what that might be.

I think what I'd do is use a file explorer with its "show hidden files" option turned on and then examine the folder tree under the NFS share.