Official moOde 7.2.0 support thread - Printable Version +- Moode Forum (https://moodeaudio.org/forum) +-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3) +--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7) +--- Thread: Official moOde 7.2.0 support thread (/showthread.php?tid=3751) |
Official moOde 7.2.0 support thread - Tim Curtis - 04-29-2021 Hi, Post all bug reports and questions concerning moOde 7.2.0 or the in-place update for 7.1.0 -> 7.2.0 in this thread. Please paste log output, scripts, etc in code boxes for readability. -Tim RE: Official moOde 7.2.0 support thread - jlynton - 04-29-2021 just updated 7.1.0 -> 7.2.0, no issues found yet, update was very fast. Many thanks for this new version of my favourite player! RE: Official moOde 7.2.0 support thread - boafrich - 04-29-2021 (04-29-2021, 12:53 PM)Tim Curtis Wrote: Hi, Hi Tim, Looking forward to the new version, thanks. Just trying the in-place update, I get the message 'Insufficient space. Update cannot proceed without at least 500M space'. Never had this before. Running on a Pi-3B 1.2 1GB. I have tried clearing cache, playback history etc. and rebooting but still the same. Is there anything else I can try or do you think I will have to do a full install, i.e. burn image from scratch? Thanks, Boaf RE: Official moOde 7.2.0 support thread - maehld - 04-29-2021 Hi. I've started with 7.1.0 and primarily used Airplay. This worked perfectly in 7.1 but is not working in 7.2. My output is a USB DAC. The difference I observed: In 7.1.0 this is how shairport is started: /usr/local/bin/shairport-sync -a Moode Airplay -- -d plughw:2 In 7.2 it says -d _out Any ideas? RE: Official moOde 7.2.0 support thread - vinnn - 04-29-2021 (04-29-2021, 02:59 PM)boafrich Wrote: Hi Tim, Have you not expanded the filesystem? Configure > System > Filesystem > [EXPAND] RE: Official moOde 7.2.0 support thread - Streamer - 04-29-2021 Hi Tim, I just upgraded to 7.2.0, all went smoothly, no issues at all, many thanks! But I need an explanation about UPNP and OpenHome implementation, because I exclusively use moode as UPNP renderer in conjunction with MinimServer+BubbleUpnp server running on a Synology-NAS. As I correctly understand it, the upmpdcli is by now devided in two separate services, the "UPnP-A/V service only" configured by "UPnP service type=UPnP-A/V" and the "UPnP-A/V service and OpenHome service" configured by "UPnP service type=OpenHome". So I can bypass the OpenHome implementation in upmpdcli and use the OpenHome renderer implemented by BubbleUPnP-server on the Synology-NAS if "UPnP service type=UPnP-A/V" is configured. Is it correct so? Thank a lot! RE: Official moOde 7.2.0 support thread - Tim Curtis - 04-29-2021 (04-29-2021, 03:00 PM)maehld Wrote: Hi. I've started with 7.1.0 and primarily used Airplay. This worked perfectly in 7.1 but is not working in 7.2. Airplay on my test 710 -> 720 updated system works fine. With Debug logging on here is what is printed in the Moode log after turning on Airplay. Code: 20210429 110547 worker: Job airplaysvc RE: Official moOde 7.2.0 support thread - Tim Curtis - 04-29-2021 (04-29-2021, 04:56 PM)Streamer Wrote: Hi Tim, My understanding is that UPnP-AV and OpenHome services are mutually exclusive. RE: Official moOde 7.2.0 support thread - FPCUser - 04-29-2021 Thanks for the new version! The update from 7.1 to 7.2 went very quickly. A small downside, I made a curve in the parametric EQ for my hearing aids. After the reboot it was still selected, but was not activated. I first had to set the parametric EQ to off, then the cure again Selecting. It then works fine. RE: Official moOde 7.2.0 support thread - Streamer - 04-29-2021 (04-29-2021, 05:31 PM)Tim Curtis Wrote:(04-29-2021, 04:56 PM)Streamer Wrote: Hi Tim, Thank you, but I don't know why the BubbleUPnP app see the Moode UPNP as renderer anyway after I have configured "UPnP service type=OpenHome"? |