Airplay not working, Allo Usbridge Signature - Klatsoot Nekry - 06-12-2021
Hello. I'm running the latest Moode version on an Allo Usbridge Sig. I know I'll catch a bunch of flack for this, but I am using both a USB WiFi dongle, and an external USB drive (powered by a hub). I don't have ethernet available yet in the location my setup is in.
Anyway, all works pretty well (radio works poorly, possibly because of my bad wifi connection with the dongle?), except that Airplay does not work at all. Not from my laptop nor my phone. I have an Audioengine device in another room that connects to Airplay with no problem.
Is it a conflict with the wifi dongle? Something else entirely?
RE: Airplay not working, Allo Usbridge Signature - Tim Curtis - 06-12-2021
What does "Airplay does not work at al" mean?
There is little in your post that could be used for troubleshooting. Reboot and then post Moode Startup log using the command below. Also post the WiFi adapter model.
RE: Airplay not working, Allo Usbridge Signature - Klatsoot Nekry - 06-12-2021
(06-12-2021, 03:34 PM)Dongle is tp-link TL-WN725NTim Curtis Wrote: Code: pi@moode:~ $ moodeutl -l
20210612 132010 worker: -- Start
20210612 132010 worker: Successfully daemonized
20210612 132011 worker: Integrity check (passed)
20210612 132012 worker: File check (OK)
20210612 132012 worker: Session vacuumed
20210612 132012 worker: Session loaded
20210612 132012 worker: Debug logging (OFF)
20210612 132012 worker: -- Audio debug
20210612 132012 worker: ALSA cards: (0:b1 | 1:Headphones | 2:DAC | 3:empty
20210612 132012 worker: MPD config: (2:JDS Labs DAC | mixer:(PCM) | card:2)
20210612 132012 worker: ALSA mixer actual (PCM)
20210612 132012 worker: ALSA PCM volume set to (0%)
20210612 132012 worker: -- System
20210612 132014 worker: Host (moode)
20210612 132015 worker: moOde (7.2.1 2021-05-06)
20210612 132015 worker: RaspiOS (10.6)
20210612 132015 worker: Kernel (5.4.77-v7+ #1371)
20210612 132015 worker: Platform (Allo USBridge SIG [CM3+ Lite 1GB v1.0])
20210612 132015 worker: ARM arch (armv7l, 32-bit kernel)
20210612 132015 worker: MPD ver (0.22.6_p0x3)
20210612 132015 worker: CPU gov (ondemand)
20210612 132015 worker: USB boot not available
20210612 132015 worker: File system not expanded yet
20210612 132015 worker: HDMI port off
20210612 132015 worker: -- Network
20210612 132015 worker: eth0 exists
20210612 132015 worker: eth0 wait 0 for IP address
20210612 132018 worker: eth0 wait 1 for IP address
20210612 132021 worker: eth0 wait 2 for IP address
20210612 132024 worker: eth0 wait 3 for IP address
20210612 132440 worker: eth0 wait 4 for IP address
20210612 132443 worker: eth0 address not assigned
20210612 132443 worker: wlan0 exists
20210612 132443 worker: wifi country (US)
20210612 132443 worker: wlan0 trying SSID (Donkeymeat)
20210612 132443 worker: IP addr (192.168.86.119)
20210612 132443 worker: Netmask (255.255.255.0)
20210612 132443 worker: Gateway (192.168.86.1)
20210612 132443 worker: Pri DNS (192.168.86.1)
20210612 132443 worker: Domain (lan)
20210612 132443 worker: -- Audio config
20210612 132443 worker: ALSA card number (2)
20210612 132443 worker: MPD audio output (JDS Labs DAC)
20210612 132444 worker: Audio formats (S16_LE, S24_3LE)
20210612 132444 worker: ALSA mixer name (PCM)
20210612 132444 worker: MPD volume control (software)
20210612 132444 worker: Hdwr volume controller exists
20210612 132444 worker: Max ALSA volume (100%)
20210612 132444 worker: ALSA loopback (Off)
20210612 132444 worker: Reset renderer active flags
20210612 132444 worker: CamillaDSP (off)
20210612 132444 worker: -- MPD startup
20210612 132444 worker: MPD started
20210612 132445 worker: MPD accepting connections
20210612 132445 worker: MPD output 1 ALSA default (on)
20210612 132445 worker: MPD output 2 ALSA crossfeed (off)
20210612 132445 worker: MPD output 3 ALSA parametric eq (off)
20210612 132445 worker: MPD output 4 ALSA graphic eq (off)
20210612 132445 worker: MPD output 5 ALSA polarity inversion (off)
20210612 132445 worker: MPD output 6 ALSA bluetooth (off)
20210612 132445 worker: MPD output 7 HTTP stream (off)
20210612 132445 worker: MPD crossfade (off)
20210612 132445 worker: MPD ignore CUE files (yes)
20210612 132445 worker: -- Feature availability
20210612 132445 worker: Source select (available)
20210612 132445 worker: Source select (source: MPD)
20210612 132445 worker: Source select (output: JDS Labs DAC)
20210612 132445 worker: Bluetooth (available)
20210612 132445 worker: Airplay renderer (available: started)
20210612 132445 worker: Spotify renderer (available)
20210612 132445 worker: Squeezelite (available)
20210612 132445 worker: RoonBridge renderer (not installed)
20210612 132445 worker: UPnP renderer (available)
20210612 132445 worker: DLNA server (available)
20210612 132445 worker: UPnP browser (available)
20210612 132445 worker: GPIO button handler (available)
20210612 132445 worker: Stream recorder (n/a)
20210612 132445 worker: -- Music sources
20210612 132445 worker: USB source (20564023-0587-4f23-9825-db26c98c5285)
20210612 132747 sourceMount(): Mount error: (mount.nfs: Connection timed out)
20210612 132747 worker: NAS and UPnP sources (mountall initiated)
20210612 132747 worker: -- Other
20210612 132747 worker: USB volume knob (Off)
20210612 132747 worker: Shellinabox SSH started
20210612 132747 worker: USB auto-mounter (udisks-glue)
20210612 132747 worker: LED0 (On)
20210612 132747 worker: LED1 (sysclass does not exist)
20210612 132747 worker: Saved MPD vol level (0)
20210612 132747 worker: Preamp volume level (0)
20210612 132748 worker: MPD volume level (100) restored
20210612 132748 worker: ALSA PCM volume (100%)
20210612 132748 worker: Auto-play (Off)
20210612 132748 worker: Maintenance interval (3 hours)
20210612 132748 worker: Screen saver activation (Never)
20210612 132748 worker: Session permissions (OK)
20210612 132748 worker: Watchdog started
20210612 132748 worker: Ready
pi@moode:~ $
What does "Airplay does not work at al" mean?
There is little in your post that could be used for troubleshooting. Reboot and then post Moode Startup log using the command below. Also post the WiFi adapter model.
RE: Airplay not working, Allo Usbridge Signature - Klatsoot Nekry - 06-12-2021
(06-12-2021, 07:04 PM)Klatsoot Nekry Wrote: (06-12-2021, 03:34 PM)Dongle is tp-link TL-WN725NTim Curtis Wrote: Code: pi@moode:~ $ moodeutl -l
20210612 132010 worker: -- Start
20210612 132010 worker: Successfully daemonized
20210612 132011 worker: Integrity check (passed)
20210612 132012 worker: File check (OK)
20210612 132012 worker: Session vacuumed
20210612 132012 worker: Session loaded
20210612 132012 worker: Debug logging (OFF)
20210612 132012 worker: -- Audio debug
20210612 132012 worker: ALSA cards: (0:b1 | 1:Headphones | 2:DAC | 3:empty
20210612 132012 worker: MPD config: (2:JDS Labs DAC | mixer:(PCM) | card:2)
20210612 132012 worker: ALSA mixer actual (PCM)
20210612 132012 worker: ALSA PCM volume set to (0%)
20210612 132012 worker: -- System
20210612 132014 worker: Host (moode)
20210612 132015 worker: moOde (7.2.1 2021-05-06)
20210612 132015 worker: RaspiOS (10.6)
20210612 132015 worker: Kernel (5.4.77-v7+ #1371)
20210612 132015 worker: Platform (Allo USBridge SIG [CM3+ Lite 1GB v1.0])
20210612 132015 worker: ARM arch (armv7l, 32-bit kernel)
20210612 132015 worker: MPD ver (0.22.6_p0x3)
20210612 132015 worker: CPU gov (ondemand)
20210612 132015 worker: USB boot not available
20210612 132015 worker: File system not expanded yet
20210612 132015 worker: HDMI port off
20210612 132015 worker: -- Network
20210612 132015 worker: eth0 exists
20210612 132015 worker: eth0 wait 0 for IP address
20210612 132018 worker: eth0 wait 1 for IP address
20210612 132021 worker: eth0 wait 2 for IP address
20210612 132024 worker: eth0 wait 3 for IP address
20210612 132440 worker: eth0 wait 4 for IP address
20210612 132443 worker: eth0 address not assigned
20210612 132443 worker: wlan0 exists
20210612 132443 worker: wifi country (US)
20210612 132443 worker: wlan0 trying SSID (Donkeymeat)
20210612 132443 worker: IP addr (192.168.86.119)
20210612 132443 worker: Netmask (255.255.255.0)
20210612 132443 worker: Gateway (192.168.86.1)
20210612 132443 worker: Pri DNS (192.168.86.1)
20210612 132443 worker: Domain (lan)
20210612 132443 worker: -- Audio config
20210612 132443 worker: ALSA card number (2)
20210612 132443 worker: MPD audio output (JDS Labs DAC)
20210612 132444 worker: Audio formats (S16_LE, S24_3LE)
20210612 132444 worker: ALSA mixer name (PCM)
20210612 132444 worker: MPD volume control (software)
20210612 132444 worker: Hdwr volume controller exists
20210612 132444 worker: Max ALSA volume (100%)
20210612 132444 worker: ALSA loopback (Off)
20210612 132444 worker: Reset renderer active flags
20210612 132444 worker: CamillaDSP (off)
20210612 132444 worker: -- MPD startup
20210612 132444 worker: MPD started
20210612 132445 worker: MPD accepting connections
20210612 132445 worker: MPD output 1 ALSA default (on)
20210612 132445 worker: MPD output 2 ALSA crossfeed (off)
20210612 132445 worker: MPD output 3 ALSA parametric eq (off)
20210612 132445 worker: MPD output 4 ALSA graphic eq (off)
20210612 132445 worker: MPD output 5 ALSA polarity inversion (off)
20210612 132445 worker: MPD output 6 ALSA bluetooth (off)
20210612 132445 worker: MPD output 7 HTTP stream (off)
20210612 132445 worker: MPD crossfade (off)
20210612 132445 worker: MPD ignore CUE files (yes)
20210612 132445 worker: -- Feature availability
20210612 132445 worker: Source select (available)
20210612 132445 worker: Source select (source: MPD)
20210612 132445 worker: Source select (output: JDS Labs DAC)
20210612 132445 worker: Bluetooth (available)
20210612 132445 worker: Airplay renderer (available: started)
20210612 132445 worker: Spotify renderer (available)
20210612 132445 worker: Squeezelite (available)
20210612 132445 worker: RoonBridge renderer (not installed)
20210612 132445 worker: UPnP renderer (available)
20210612 132445 worker: DLNA server (available)
20210612 132445 worker: UPnP browser (available)
20210612 132445 worker: GPIO button handler (available)
20210612 132445 worker: Stream recorder (n/a)
20210612 132445 worker: -- Music sources
20210612 132445 worker: USB source (20564023-0587-4f23-9825-db26c98c5285)
20210612 132747 sourceMount(): Mount error: (mount.nfs: Connection timed out)
20210612 132747 worker: NAS and UPnP sources (mountall initiated)
20210612 132747 worker: -- Other
20210612 132747 worker: USB volume knob (Off)
20210612 132747 worker: Shellinabox SSH started
20210612 132747 worker: USB auto-mounter (udisks-glue)
20210612 132747 worker: LED0 (On)
20210612 132747 worker: LED1 (sysclass does not exist)
20210612 132747 worker: Saved MPD vol level (0)
20210612 132747 worker: Preamp volume level (0)
20210612 132748 worker: MPD volume level (100) restored
20210612 132748 worker: ALSA PCM volume (100%)
20210612 132748 worker: Auto-play (Off)
20210612 132748 worker: Maintenance interval (3 hours)
20210612 132748 worker: Screen saver activation (Never)
20210612 132748 worker: Session permissions (OK)
20210612 132748 worker: Watchdog started
20210612 132748 worker: Ready
pi@moode:~ $
What does "Airplay does not work at al" mean?
There is little in your post that could be used for troubleshooting. Reboot and then post Moode Startup log using the command below. Also post the WiFi adapter model.
Oops, sorry: dongle is tp-link TL-WN725N.
"Does not work at all" means that when I assign output to "Moode Airplay", nothing happens. Before update to recent Moode version, at least the web UI screen would display that an Airplay source was interrupting playback (although playback was stuttery and halting, with harsh distortion).
RE: Airplay not working, Allo Usbridge Signature - Tim Curtis - 06-12-2021
The log entries below indicate either (1) a non-official moOde 7.2.1 image or (2) MPD settings not saved after in-place update.
Code: 20210612 132445 worker: MPD output 1 ALSA default (on)
20210612 132445 worker: MPD output 2 ALSA crossfeed (off)
20210612 132445 worker: MPD output 3 ALSA parametric eq (off)
20210612 132445 worker: MPD output 4 ALSA graphic eq (off)
20210612 132445 worker: MPD output 5 ALSA polarity inversion (off)
20210612 132445 worker: MPD output 6 ALSA bluetooth (off)
20210612 132445 worker: MPD output 7 HTTP stream (off)
The entries should look like below.
Code: 20210608 095356 worker: MPD output 1 ALSA Default (on)
20210608 095356 worker: MPD output 2 ALSA Bluetooth (off)
20210608 095356 worker: MPD output 3 HTTP Server (off)
Try either the official image or open MPD settings and SAVE then reboot and check Moode log.
RE: Airplay not working, Allo Usbridge Signature - Klatsoot Nekry - 06-12-2021
(06-12-2021, 08:20 PM)Tim Curtis Wrote: The log entries below indicate either (1) a non-official moOde 7.2.1 image or (2) MPD settings not saved after in-place update.
Code: 20210612 132445 worker: MPD output 1 ALSA default (on)
20210612 132445 worker: MPD output 2 ALSA crossfeed (off)
20210612 132445 worker: MPD output 3 ALSA parametric eq (off)
20210612 132445 worker: MPD output 4 ALSA graphic eq (off)
20210612 132445 worker: MPD output 5 ALSA polarity inversion (off)
20210612 132445 worker: MPD output 6 ALSA bluetooth (off)
20210612 132445 worker: MPD output 7 HTTP stream (off)
The entries should look like below.
Code: 20210608 095356 worker: MPD output 1 ALSA Default (on)
20210608 095356 worker: MPD output 2 ALSA Bluetooth (off)
20210608 095356 worker: MPD output 3 HTTP Server (off)
Try either the official image or open MPD settings and SAVE then reboot and check Moode log.
Looks like "open MPD settings and SAVE then reboot and check Moode log." did the trick. Thank you. Any advice on how I could have avoided the trouble? Thanks very much for your help
RE: Airplay not working, Allo Usbridge Signature - Tim Curtis - 06-12-2021
lol, before INSTALL an in-place update be sure to first VIEW the update instructions. Below is from the 720 to 721 update. Note number 4 ;-)
Code: This package upgrades release 7.2.0 to 7.2.1 and includes important updates and bug fixes. Install time is around 1 MINUTE depending on network and system speed. Be sure to BACKUP your system before applying this update.
1) Monitor progress with the SSH command: moodeutl -t
2) Reboot after the completion message appears.
3) The file /var/local/www/update-VER.log contains a log of the update.
4) After reboot open MPD Config and SAVE to update the settings.
.
.
.
RE: Airplay not working, Allo Usbridge Signature - Klatsoot Nekry - 06-12-2021
After letting Airplay source play for a while, playback has once again gotten crunchy, distorted. Is it a matter of fiddling with the buffer?
RE: Airplay not working, Allo Usbridge Signature - Klatsoot Nekry - 06-12-2021
(06-12-2021, 09:50 PM)Tim Curtis Wrote: lol, before INSTALL an in-place update be sure to first VIEW the update instructions. Below is from the 720 to 721 update. Note number 4 ;-)
Code: This package upgrades release 7.2.0 to 7.2.1 and includes important updates and bug fixes. Install time is around 1 MINUTE depending on network and system speed. Be sure to BACKUP your system before applying this update.
1) Monitor progress with the SSH command: moodeutl -t
2) Reboot after the completion message appears.
3) The file /var/local/www/update-VER.log contains a log of the update.
4) After reboot open MPD Config and SAVE to update the settings.
.
.
.
Man, I read all that before updating, too! Just forgot to follow through
RE: Airplay not working, Allo Usbridge Signature - Tim Curtis - 06-12-2021
Do you have CamillaDSP and ALSA loopback turned on?
|