+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7)
+--- Thread: [SOLVED] Can't connect NAS (/showthread.php?tid=392)
Pages:
1
2
Can't connect NAS - saikzor - 08-09-2018
Hello,
I've recently set up the latest moode on my RPi 3. I'm trying to connect it to a NAS attached to my router(Nighthawk X10) which moode correctly finds while scanning. The error I'm getting is:
20180809 093913 wrk_sourcemount(): Mount error: (username specified with no parameter)
If I try to add some username or password, I get the following:
20180809 093827 wrk_sourcemount(): Mount error: (mount error: could not resolve address for READYSHARE: Unknown error)
Any ideas?
RE: Can't connect NAS - Onionhead - 08-09-2018
I have Synology and use NFS works great. Scan never worked for me. If you would like to give NFS a shot and you have questions let me know.
RE: Can't connect NAS - Tim Curtis - 08-10-2018
(08-09-2018, 07:37 PM)saikzor Wrote: Hello,
I've recently set up the latest moode on my RPi 3. I'm trying to connect it to a NAS attached to my router(Nighthawk X10) which moode correctly finds while scanning. The error I'm getting is:
20180809 093913 wrk_sourcemount(): Mount error: (username specified with no parameter)
If I try to add some username or password, I get the following:
20180809 093827 wrk_sourcemount(): Mount error: (mount error: could not resolve address for READYSHARE: Unknown error)
Any ideas?
Post a screen shot or list the values you entered on the NAS config screen and I'll have a look.
RE: Can't connect NAS - saikzor - 08-10-2018
Not sure what values you mean. Is this good? https://imgur.com/0WI5KM4 https://imgur.com/ZJVChng
RE: Can't connect NAS - Tim Curtis - 08-10-2018
I need to see moOde's NAS config screen or optionally just list the values you entered in the screen.
RE: Can't connect NAS - saikzor - 08-10-2018
(08-10-2018, 12:19 AM)Tim Curtis Wrote:(08-09-2018, 07:37 PM)saikzor Wrote: Hello,
I've recently set up the latest moode on my RPi 3. I'm trying to connect it to a NAS attached to my router(Nighthawk X10) which moode correctly finds while scanning. The error I'm getting is:
20180809 093913 wrk_sourcemount(): Mount error: (username specified with no parameter)
If I try to add some username or password, I get the following:
20180809 093827 wrk_sourcemount(): Mount error: (mount error: could not resolve address for READYSHARE: Unknown error)
Any ideas?
Post a screen shot or list the values you entered on the NAS config screen and I'll have a look.
(08-10-2018, 02:48 PM)Tim Curtis Wrote: I need to see moOde's NAS config screen or optionally just list the values you entered in the screen.
Is this not it? https://i.imgur.com/ZJVChng.png
RE: Can't connect NAS - Tim Curtis - 08-10-2018
Yes, thats it.
Try entering Guest for User ID and leave Password blank.
-Tim
RE: Can't connect NAS - saikzor - 08-10-2018
(08-10-2018, 05:23 PM)Tim Curtis Wrote: Yes, thats it.
Try entering Guest for User ID and leave Password blank.
-Tim
Tried that, does not work. I get the following error:
20180810 141001 worker: Job sourcecfg
20180810 141002 wrk_sourcemount(): Mount error: (mount error: could not resolve address for READYSHARE: Unknown error)
20180810 141002 src-config(): Job: updmpddb
20180810 141005 worker: Job updmpddb
RE: Can't connect NAS - TheOldPresbyope - 08-10-2018
(08-10-2018, 06:11 PM)saikzor Wrote:(08-10-2018, 05:23 PM)Tim Curtis Wrote: Yes, thats it.
Try entering Guest for User ID and leave Password blank.
-Tim
Tried that, does not work. I get the following error:
20180810 141001 worker: Job sourcecfg
20180810 141002 wrk_sourcemount(): Mount error: (mount error: could not resolve address for READYSHARE: Unknown error)
20180810 141002 src-config(): Job: updmpddb
20180810 141005 worker: Job updmpddb
The Linux utility smbtree can find your server's name READYSHARE but the Linux mount command can't resolve it into an IP address (local DNS/Avahi may not be running).
Try using the "EDIT server manually" option to enter your server as <IP address>/share. Something like 192.168.1.123/USER instead of READYSHARE/USER (or whatever; I can't tell if the whole share name is displayed in your screen capture).
Hope this helps.
Regards,
Kent
RE: Can't connect NAS - saikzor - 08-11-2018
(08-10-2018, 06:24 PM)TheOldPresbyope Wrote:(08-10-2018, 06:11 PM)saikzor Wrote:(08-10-2018, 05:23 PM)Tim Curtis Wrote: Yes, thats it.
Try entering Guest for User ID and leave Password blank.
-Tim
Tried that, does not work. I get the following error:
20180810 141001 worker: Job sourcecfg
20180810 141002 wrk_sourcemount(): Mount error: (mount error: could not resolve address for READYSHARE: Unknown error)
20180810 141002 src-config(): Job: updmpddb
20180810 141005 worker: Job updmpddb
The Linux utility smbtree can find your server's name READYSHARE but the Linux mount command can't resolve it into an IP address (local DNS/Avahi may not be running).
Try using the "EDIT server manually" option to enter your server as <IP address>/share. Something like 192.168.1.123/USER instead of READYSHARE/USER (or whatever; I can't tell if the whole share name is displayed in your screen capture).
Hope this helps.
Regards,
Kent
This solved it. Thanks!