+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7)
+--- Thread: [SOLVED] Not working on new Pi4B (/showthread.php?tid=4713)
Not working on new Pi4B - SamWeesie - 02-05-2022
Just bought a new Pi 4B 2GB. Moode wont run.
After hooking up a monitor I got the message "This board requires newer software". I use the latest moode version.
The ethernet leds show a negotiated network speed of 1Gbps. In the router there is no entry of an IP address.
Anybody having a clue what's going on?
P.S. I'm using moode on a Pi 3B for over a year and that runs very good
RE: Not working on new Pi4B - DRONE7 - 02-05-2022
Yes...in this thread...
https://moodeaudio.org/forum/showthread.php?tid=4666&pid=39143#pid39143
RE: Not working on new Pi4B - SamWeesie - 02-05-2022
So this problem is solved in moode 8. Any idea when this is coming?
Do I have to wait for this new version or does anyone know a way to circumvent this?
RE: Not working on new Pi4B - Tim Curtis - 02-05-2022
Upcoming moOde 8 planned release in Q1 2022.
RE: Not working on new Pi4B - seashell - 02-24-2022
Over at the volumio forums someone got it to boot by copying "16 files (fixup*.dat and start*.elf) over from latest raspbian onto volumio".
https://community.volumio.org/t/volumio-not-working-on-raspberry-pi-4-rev-1-5-board-start4-elf-not-compatible/53113
I suppose one could try something similar with moode 7 to see if it worked for revision 1.5.
RE: Not working on new Pi4B - SamWeesie - 02-24-2022
(02-24-2022, 01:50 AM)seashell Wrote: Over at the volumio forums someone got it to boot by copying "16 files (fixup*.dat and start*.elf) over from latest raspbian onto volumio".
https://community.volumio.org/t/volumio-not-working-on-raspberry-pi-4-rev-1-5-board-start4-elf-not-compatible/53113
I suppose one could try something similar with moode 7 to see if it worked for revision 1.5.
Thank you for this workaround, but I prefer to wait for MoOde 8 which is coming very soon (this month???)
RE: Not working on new Pi4B - schwidi - 02-25-2022
I used a trick.
Since I still have an older PI 4 with Moodeaudio, I did an rpi update with SSH. The command is: sudo rpi-update
With this it installed the new 5.15 kernel it needs for the new rev. 1.5.
Then just put the memory card into the new Raspberry 4 and lo and behold it boots and runs fine.
RE: Not working on new Pi4B - SamWeesie - 03-15-2022
I can confirm that moOde 8.0.0 is working fine on 4B hardware revision 1.5
Thanks a lot Tim