+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7)
+--- Thread: How to configure Moode with the DENON DNP-800NE? (/showthread.php?tid=4758)
Pages:
1
2
How to configure Moode with the DENON DNP-800NE? - Taki8888 - 03-04-2022
Hi,
I use IQ Audio DAC hat with rpi4. Playback music from USB SSD.
How would I configure rpi4 so the Denon will detect and playback
from the rpi4?
The Denon and RPI4 will have ethernet connect or WiFi, not sure yet.
What I’m not sure is using Denon or Moode to Navigate and playback
the songs.
Thanks
RE: How to configure Moode with the DENON DNP-800NE? - Tim Curtis - 03-04-2022
The Denon probably has some audio inputs for example USB or S/PDIF. You can connect Pi USB directly to Denon and then select it in moOde MPD Config. If the Denon is not recognized then an alternative would be to use a S/PDIF I2S board like an Allo DigiOne and connect it to Denon S/PDIF input.
RE: How to configure Moode with the DENON DNP-800NE? - Taki8888 - 03-05-2022
Thank you Tim. :-)
The Denon has only a USB A port to add a USB storage for playback. There is no USB B port.
RE: How to configure Moode with the DENON DNP-800NE? - Taki8888 - 03-05-2022
The Denon has only USB A, Optical and Ethernet port.
So only way is ethernet to RPI4. Can I still use Moode in this case?
RE: How to configure Moode with the DENON DNP-800NE? - Tim Curtis - 03-05-2022
Not possible. You would have to use the Optical input port on the Denon.
RE: How to configure Moode with the DENON DNP-800NE? - Taki8888 - 03-05-2022
Thanks Tim.
I ordered the Hifiberry Digi2 Pro to try.
Hope it is pretty good for optical output.
RE: How to configure Moode with the DENON DNP-800NE? - JanneP - 03-05-2022
Hhmmmm DENON DNP-800NE is a network audio player with optical output, optical INPUT port is required.
RE: How to configure Moode with the DENON DNP-800NE? - DRONE7 - 03-05-2022
(03-05-2022, 04:22 PM)JanneP Wrote: Hhmmmm DENON DNP-800NE is a network audio player with optical output, optical INPUT port is required.
You are quite correct...no spdif in so @Taki8888 will not be able to connect the Hifiberry Digi Pro.
Seems the Denon is lacking in physical inputs other than network streaming.
Perhaps then turning on the Moode HTTP streamer would work ?
M>Configure>Audio>MPD Options> HTTP streaming (Change Lame to Flac) and see if the Denon picks it up ?
RE: How to configure Moode with the DENON DNP-800NE? - Taki8888 - 03-06-2022
I certainly overlooked this one. :-(
Nice. I will try your suggestion.
Thanks JanneP and Drone7.
RE: How to configure Moode with the DENON DNP-800NE? - Taki8888 - 03-06-2022
Where to change Lame to Flac? What does that do?