![]() |
Progress on Katana driver load fail on 4B - Printable Version +- Moode Forum (https://moodeaudio.org/forum) +-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3) +--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7) +--- Thread: Progress on Katana driver load fail on 4B (/showthread.php?tid=5645) |
Progress on Katana driver load fail on 4B - Tim Curtis - 06-20-2023 See Git issue below https://github.com/raspberrypi/linux/issues/5511 RE: Progress on Katana driver load fail on 4B - bitlab - 06-20-2023 Nice job! RE: Progress on Katana driver load fail on 4B - Tim Curtis - 06-20-2023 Chalk that one up to the Pi Kernel dev's. RE: Progress on Katana driver load fail on 4B - Nutul - 06-20-2023 (06-20-2023, 07:12 PM)TimĀ Curtis Wrote: See Git issue below Fantastic! RE: Progress on Katana driver load fail on 4B - Tim Curtis - 06-21-2023 The Katana/4B fix will appear in a future Raspberry Pi kernel bump. If it's released in Q3 2023 then it will be included it in upcoming moOde 8.3.4 :-) In the meantime here is a procedure to install the updated dtoverlay. Code: sudo cp /boot/overlays/allo-katana-dac-audio.dtbo ./allo-katana-dac-audio.dtbo.original RE: Progress on Katana driver load fail on 4B - the_bertrum - 06-21-2023 This is brilliant work Tim. I don't have any affected hardware, but I'm very impressed with you getting this fixed in the kernel. RE: Progress on Katana driver load fail on 4B - TheOldPresbyope - 06-21-2023 Kudos to Tim and also to pelwell and the other RPF folk who responded so quickly and completely. The FOSS movementĀ at its best. Regards, Kent RE: Progress on Katana driver load fail on 4B - Tim Curtis - 06-21-2023 I just provided testing and data it was the truly brilliant Pi kernel dev's @pelwell that found and fixed the bug in the Boss 2 CODEC and @6by9 that provided the I2C BUS speed fix for the Katana dtoverlay. |