[PROBLEM] Problem playing DSD256 with Camilla DSP

[Tim Curtis]

The file you provided plays perfectly on my end with Camilla in the pipeline. You mentioned that you also got audio glitches using the built in sample Crossfeed filter so no need to test with your custom filter.

       
       

Code:

pi@sig:~ $ moodeutl -m
CPU: 1.5 GHz | Load: 17% / 53C | Memory: 14% used | Disk: 10% used / 25G free | PHP: 6 workers

ETA: You should prolly try debugging the issue by writing a fresh image to a different uSD card and then doing just enough configuration to be able to play the file with the Crossfeed filter. Also try both USB3 and USB2 ports on the Pi4.

[Sucama]

The file you provided plays perfectly on my end with Camilla in the pipeline. You mentioned that you also got audio glitches using the built in sample Crossfeed filter so no need to test with your custom filter.

Code:

pi@sig:~ $ moodeutl -m
CPU: 1.5 GHz | Load: 17% / 53C | Memory: 14% used | Disk: 10% used / 25G free | PHP: 6 workers

ETA: You should prolly try debugging the issue by writing a fresh image to a different uSD card and then doing just enough configuration to be able to play the file with the Crossfeed filter. Also try both USB3 and USB2 ports on the Pi4.

Well, I have finished doing a clean installation on a new micro SD card; the result is still the same... choppy sound. I can't find a solution. swap USB3 to USB 2, same thing. Maybe it's a limitation of the Dac Topping D50s or I don't know what else... I'll stop using Camilla dsp, for now