Hi,
moOde 7.3.0 is available for download at http://moodeaudio.org :-)
This release includes important new features, updates and bug fixes including updated CamillaDSP components as described below.
NOTE: There is also an in-place update available that upgrades release 7.2.1 to 7.3.0. This update takes around 2 MINUTES to complete depending on network and system speed. This update will turn of any DSP the was on in order to update related config files. Monitor progress of the update via SSH command moodeutl -t. Be sure to BACKUP your system before applying this update.
Highlights:
- NEW: ALSA output modes including Default (plughw) and Direct (hw)
- NEW: Volume normalization and format options for librespot
- UPD: Bump to MPD 0.22.8
- UPD: Bump to librespot 0.2.0
- UPD: Bump to CamillaDSP 0.5.2, GUI 0.4.1, Backend 0.7.1, Plot 0.5.3
- FIX: Instability in libcurl3 shipped with RaspiOS Buster
CamillaDSP updates:
- Wave files are now supported for convolution. No need any more to convert to raw files (camilladsp 5.1+)
- The moOde quick convolution interface is updated to support wave files.
- The files tab on the camillagui is only shown in Expert Mode.
- CamillaDSP now uses ALSA plughw instead of hw as output.
- With some filters you can choose it you want to use Q or bandwidth (camilladsp 5.2+)
- Improved feedback about the configuration errors (camilladsp 5.0+)
- See more info about the 0.5+ at https://github.com/HEnquist/camilladsp/b...ANGELOG.md
This release is based on RaspiOS Buster Lite 10.6 (2020-12-02) and Linux kernel 5.4.77 build #1371. Refer to the Release Notes for more information.
Take a moment and make a donation to show your appreciation for the effort and dedication that goes into developing and supporting moOde audio player. Your donation helps to ensure the moOde project is able to continue to make great audio software for the wonderful Raspberry Pi audio community :-)
Regards,
The moOde crew
Release notes:
moOde 7.3.0 is available for download at http://moodeaudio.org :-)
This release includes important new features, updates and bug fixes including updated CamillaDSP components as described below.
NOTE: There is also an in-place update available that upgrades release 7.2.1 to 7.3.0. This update takes around 2 MINUTES to complete depending on network and system speed. This update will turn of any DSP the was on in order to update related config files. Monitor progress of the update via SSH command moodeutl -t. Be sure to BACKUP your system before applying this update.
Highlights:
- NEW: ALSA output modes including Default (plughw) and Direct (hw)
- NEW: Volume normalization and format options for librespot
- UPD: Bump to MPD 0.22.8
- UPD: Bump to librespot 0.2.0
- UPD: Bump to CamillaDSP 0.5.2, GUI 0.4.1, Backend 0.7.1, Plot 0.5.3
- FIX: Instability in libcurl3 shipped with RaspiOS Buster
CamillaDSP updates:
- Wave files are now supported for convolution. No need any more to convert to raw files (camilladsp 5.1+)
- The moOde quick convolution interface is updated to support wave files.
- The files tab on the camillagui is only shown in Expert Mode.
- CamillaDSP now uses ALSA plughw instead of hw as output.
- With some filters you can choose it you want to use Q or bandwidth (camilladsp 5.2+)
- Improved feedback about the configuration errors (camilladsp 5.0+)
- See more info about the 0.5+ at https://github.com/HEnquist/camilladsp/b...ANGELOG.md
This release is based on RaspiOS Buster Lite 10.6 (2020-12-02) and Linux kernel 5.4.77 build #1371. Refer to the Release Notes for more information.
Take a moment and make a donation to show your appreciation for the effort and dedication that goes into developing and supporting moOde audio player. Your donation helps to ensure the moOde project is able to continue to make great audio software for the wonderful Raspberry Pi audio community :-)
Regards,
The moOde crew
Release notes:
Code:
########################################################
//
// 2021-06-25 TC moOde 7.3.0
//
########################################################
New features
- NEW: ALSA output modes including Default (plughw) and Direct (hw)
- NEW: Volume normalization and format options for librespot
Updates
- UPD: Bump to MPD 0.22.8
- UPD: Bump to librespot 0.2.0
- UPD: Bump to CamillaDSP 0.5.2, GUI 0.4.1, Backend 0.7.1, Plot 0.5.3
- UPD: Simplify ALSA framework
- UPD: Add verbose debug option to CamillaDSP
- UPD: Run updMpdConf() after in-place update
- UPD: Improve method for updating currentsong.txt
- UPD: Option to turn off Now-playing (EQ bars) icon
- UPD: Option to turn off CoverView Playbar
- UPD: Enable rpi-cirrus-wm5102.dtbo to show in DT overlay list
- UPD: Route Bluetooth through ALSA framework
- UPD: Load i2c-dev at boot time via /etc/modules
- UPD: Set theme-color meta element in header to Theme color
- UPD: Add Output chain and Loopback state to Audio info
- UPD: Improve how MPD Config changes are processed
- UPD: Drop Max USB current (not applicable anymore)
- UPD: BlueZ Config when change to Local, disconnect device
Bug fixes
- FIX: Missing "Roonbridge Active" in currentsong.txt
- FIX: Currentsong.txt truncated at startup
- FIX: Airplay, Spotify renderers crash when ALSA Loopback On
- FIX: DSP confs break when audioout set to Bluetooth
- FIX: Station Home page field not in Audio info
- FIX: Wlan0 power save not disabled during startup for Pi-Zero W
- FIX: Instability in libcurl3 shipped with RaspiOS Buster
- FIX: Permissions on shairport-sync debug log
- FIX: Missing -u option in shairport-sync logging
- FIX: CamillaDSP and 64-bit kernel showing for 32-bit only Pi's
- FIX: WiFi/BT options missing from System config for Zero W
- FIX: Display wakes when USB DAC disconnected if Wake on play ON
- FIX: CamillaDSP Config back link handling