Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


Problem: Error 500 after new istallation
#1
Hi, i just installed the 8.3.2 version from image.
Everything words after boot, but after some time ideling i get an internal server error 500.
Also i cant get a connection with ssh, i have to reboot the rpi. 
then everything starts from new.

can someone help me fix this problem?

system:
rpi 3b
16gb sd card
only moode is running
Reply
#2
Firstly make sure you've followed the setup guide with respect to setting a user an password in the image.

Then, post the startup log (moodeutl -l).
----------------
Robert
Reply
#3
Hi, here is the Log:

Code:
                moOde audio player
             Release 8.3.2 2023-04-21
               (C) 2014 Tim Curtis


The programs included with moOde are free software; the
exact distribution terms for each program are described
in the individual files in /usr/share/doc/*/copyright or
in the moOde source files. moOde comes with absolutely
no warranties either expressed or implied, or any other
such guarantees.

To set a new password for your userid type 'passwd'.

Last login: Mon May  1 09:42:12 2023 from 192.168.1.6
root@moodepi:~# moodeutl -l
20230501 104640 worker: --
20230501 104640 worker: -- Start moOde 8 series
20230501 104640 worker: --
20230501 104640 worker: Successfully daemonized
20230501 104640 worker: Waiting for Linux startup...
20230501 131127 worker: Linux startup complete
20230501 131128 worker: Boot config backed up
20230501 131135 worker: File check (OK)
20230501 131137 worker: Session vacuumed
20230501 131137 worker: Session loaded
20230501 131137 worker: Debug logging (OFF)
20230501 131137 worker: --
20230501 131137 worker: -- Audio debug
20230501 131137 worker: --
20230501 131137 worker: ALSA cards: (0:b1 | 1:Headphones | 2:empty | 3:empty
20230501 131137 worker: MPD config: (1:Pi Headphone jack | mixer:(PCM) | card:1)
20230501 131137 worker: ALSA mixer actual (PCM)
20230501 131137 worker: ALSA PCM volume set to (0%)
20230501 131137 worker: --
20230501 131137 worker: -- System
20230501 131137 worker: --
20230501 131141 worker: Host      (moode)
20230501 131141 worker: Hardware  (Pi-3B 1.2 1GB)
20230501 131141 worker: moOde     (8.3.2 2023-04-21)
20230501 131141 worker: RaspiOS   (11.6)
20230501 131141 worker: Kernel    (6.1.21-v8+ #1642)
20230501 131141 worker: Procarch  (aarch64, 64-bit)
20230501 131141 worker: MPD ver   (0.23.12)
20230501 131141 worker: CPU gov   (ondemand)
20230501 131141 worker: Userid    (pb)
20230501 131141 worker: Homedir   (/home/pb)
20230501 131141 worker: USB boot  (not enabled yet)
20230501 131142 worker: File sys  (expanded)
20230501 131142 worker: HDMI port (On)
20230501 131142 worker: Sys LED0  (On)
20230501 131142 worker: Sys LED1  (On)
20230501 131142 worker: --
20230501 131142 worker: -- Network
20230501 131142 worker: --
20230501 131142 worker: eth0 adapter exists
20230501 131142 worker: eth0 address check (Off)
20230501 131142 worker: IP addr (192.168.1.39)
20230501 131142 worker: Netmask (255.255.255.0)
20230501 131142 worker: Gateway (192.168.1.1)
20230501 131142 worker: Pri DNS (192.168.1.1)
20230501 131142 worker: Domain  (fritz.box)
20230501 131142 worker: wlan0 adapter exists
20230501 131142 worker: wlan0 country (US)
20230501 131142 worker: wlan0 configured SSID (Chamber)
20230501 131142 worker: wlan0 SSID alternates (None)
20230501 131142 worker: wlan0 router mode (Off)
20230501 131142 worker: wlan0 address check (up to 90 secs)
20230501 131142 worker: wlan0 connected to SSID (Chamber)
20230501 131143 worker: wlan0 power save (Disabled)
20230501 131143 worker: IP addr (192.168.1.38)
20230501 131143 worker: Netmask (255.255.255.0)
20230501 131143 worker: Gateway (192.168.1.1)
20230501 131143 worker: Pri DNS (192.168.1.1)
20230501 131143 worker: Domain  (fritz.box)
20230501 131143 worker: --
20230501 131143 worker: -- Software update
20230501 131143 worker: --
20230501 131143 worker: Automatic check (Off)
20230501 131143 worker: --
20230501 131143 worker: -- Audio config
20230501 131143 worker: --
20230501 131143 worker: MPD conf updated
20230501 131143 worker: ALSA card number (1)
20230501 131144 worker: MPD audio output (Pi Headphone jack)
20230501 131144 worker: Audio formats (U8, S16_LE)
20230501 131144 worker: ALSA mixer name (PCM)
20230501 131144 worker: MPD mixer type (hardware)
20230501 131144 worker: Hdwr volume controller exists
20230501 131144 worker: Max ALSA volume (100%)
20230501 131144 worker: ALSA output mode (Default: plughw)
20230501 131144 worker: ALSA loopback (Off)
20230501 131144 worker: Reset renderer active flags
20230501 131144 worker: CamillaDSP configuration (off)
20230501 131144 worker: CamillaDSP volume sync   (off)
20230501 131144 worker: CamillaDSP volume range  (60)
20230501 131144 worker: --
20230501 131144 worker: -- File sharing
20230501 131144 worker: --
20230501 131144 worker: SMB file sharing (Off)
20230501 131144 worker: NFS file sharing (Off)
20230501 131144 worker: --
20230501 131144 worker: -- MPD startup
20230501 131144 worker: --
20230501 131145 worker: MPD started
20230501 131145 worker: MPD accepting connections
20230501 131145 worker: MPD output 1 ALSA Default (On)
20230501 131145 worker: MPD output 2 ALSA Bluetooth (Off)
20230501 131145 worker: MPD output 3 HTTP Server (Off)
20230501 131145 worker: MPD crossfade (off)
20230501 131145 worker: MPD ignore CUE files (yes)
20230501 131145 worker: --
20230501 131145 worker: -- Music sources
20230501 131145 worker: --
20230501 131145 worker: USB sources
20230501 131145 worker: No drives found
20230501 131145 worker: NAS sources
20230501 131145 worker: None configured
20230501 131145 worker: --
20230501 131145 worker: -- Feature availability
20230501 131145 worker: --
20230501 131145 worker: Input select (available)
20230501 131145 worker: Input (MPD)
20230501 131145 worker: Output (Pi Headphone jack)
20230501 131145 worker: Bluetooth (available)
20230501 131146 worker: AirPlay renderer (available)
20230501 131146 worker: Spotify renderer (available)
20230501 131146 worker: Squeezelite (available)
20230501 131146 worker: RoonBridge renderer (not installed)
20230501 131146 worker: Multiroom sender (available)
20230501 131146 worker: Multiroom receiver (available)
20230501 131146 worker: UPnP renderer (available)
20230501 131146 worker: DLNA server (available)
20230501 131146 worker: GPIO button handler (available)
20230501 131146 worker: Stream recorder (available: not installed)
20230501 131146 worker: HTTPS-Only mode (n/a)
20230501 131146 worker: --
20230501 131146 worker: -- Other
20230501 131146 worker: --
20230501 131146 worker: USB volume knob (Off)
20230501 131146 worker: USB auto-mounter (udisks-glue)
20230501 131146 worker: Saved MPD vol level (0)
20230501 131146 worker: Preamp volume level (0)
20230501 131146 worker: MPD volume level (33) restored
20230501 131146 worker: ALSA PCM volume (73%)
20230501 131146 worker: Auto-play (Off)
20230501 131147 worker: LocalUI (Off)
20230501 131147 worker: Automatic CoverView (Off)
20230501 131147 worker: On-screen keyboard (Off)
20230501 131147 worker: Library scope (all)
20230501 131147 worker: View reset to playback
20230501 131147 worker: Maintenance interval (360 minutes)
20230501 131147 worker: Screen saver activation (Never)
20230501 131147 worker: Session permissions (OK)
20230501 131147 worker: --
20230501 131147 worker: -- Startup complete
20230501 131147 worker: --
20230501 131147 worker: Mount monitor (off)
20230501 131147 worker: Watchdog monitor (started)
20230501 131147 worker: Ready
Reply
#4
(05-01-2023, 09:40 AM)traillight Wrote: Hi, i just installed the 8.3.2 version from image.
Everything words after boot, but after some time ideling i get an internal server error 500.
Also i cant get a connection with ssh, i have to reboot the rpi. 
then everything starts from new.

can someone help me fix this problem?

system:
rpi 3b
16gb sd card
only moode is running

The symptoms below suggest an issue external to moOde software for example power supply, uSD Card, network, etc.

"but after some time ideling i get an internal server error 500."
"cant get a connection with ssh, i have to reboot the rpi"

Try swapping in different hardware or uSD Card.
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#5
could it be a to weak power supply?
Reply
#6
(05-01-2023, 12:15 PM)traillight Wrote: could it be a to weak power supply?

Try

- Menu, Configure, System
- Menu, System info

In the System Parameters section look for lines like below. Typically if the Pi draws more power than the supply can provide, some sort of "Undervoltage has occurred..." message will show up after "Throttled text"

Code:
Throttled bitmask = 0x0
Throttled text = No throttling has occurred
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply


Forum Jump: