Problems configuring MOode audio

[SteefenJo]

I need help configuring MOode audio. After starting MOode audio from a Raspberry pi4B, I try to create an audio source from my nas.
When I have created that source, the whole thing crashes. I can no longer operate any button.
Does this sound familiar to anyone and what can I do about it? I have already reflashed MOode audio several times on a micro sd card, but nothing helps.

After i created the source i get the message that the system is busy, but how long will this take?

[kurt1970]

I've + 2500 albums on a NAS mounted via SMB. Never got an issue with it.

Did you use a SMB Share?

I configured the path manually. In my case it looks like this: 192.168.1.201/Music/Music
where 192.168.1.201 is the ip address of the NAS, the first Music is the share name and the second Music is the folder name where my music is stored on the Music share.

[Nutul]

Are you sure you have created a username + password, and enabled and configured your wi-fi, using the Raspberry Installer, prior to flashing the SD card?

Then you can rebbot, and post the startup log in a

Code:

CODE block, like this one, 5th icon from right to left, in the toolbar

here, so we can have a look at it.

[SteefenJo]

I've + 2500 albums on a NAS mounted via SMB. Never got an issue with it.

Did you use a SMB Share?

I configured the path manually. In my case it looks like this: 192.168.1.201/Music/Music
where 192.168.1.201 is the ip address of the NAS, the first Music is the share name and the second Music is the folder name where my music is stored on the Music share.

Yes, i used SMB Share, but still i didn't manage to get it up and running.

[SteefenJo]

Are you sure you have created a username + password, and enabled and configured your wi-fi, using the Raspberry Installer, prior to flashing the SD card?

Then you can rebbot, and post the startup log in a

Code:

CODE block, like this one, 5th icon from right to left, in the toolbar

here, so we can have a look at it.

No i didn't create an username and password and no i didn't enable and configured wifi. I flashed the image to a micro sd card, using balena etcher. I will try this with Raspberry Pi imager. Thanx for the info :-)

Thank you for the info, MOode audio is playing right now

[Tim Curtis]

Read the Setup Guide. There's a link to it on the Download page at moodeaudio.org