[SOLVED] Allo USB Bridge signature - unable to select USB

[mwolfmoode]

Hello,
I installed Moode on my Allo USB Bridge signature, but i cannot select USB as audio output; i can select only I2S option.
I tried several moode versions, starting with 8.3.7 to 9.1 (in 9.1 i cannot open page with audio setup).

Any ideas? i want to use Allo as DLNA renderer, and to control it via mconnect.

[Tim Curtis]

Reboot and then post the contents of the startup log.

The log can be viewed via the SSH command moodeutl -l or downloaded via the Logs section in System Config, or via Menu, System info from any of the Config screens. The startup log will be at the end of System info output.

[mwolfmoode]

after restart, i cannot open again system or audio menus, so i cannot download the logs; i can open those menus only first time after uploading the image to SD card, and then after one restart, no menu is accessible anymore (page with menu details does not open) ; it's very frustrating...something is clearly wrong with newer moode images for allo usb bridge.

[steve4star]

Can you double check that you have met all the requirements for burning and configuring the newest 9.x images. The install guide in the top of the forum details all the steps including setting up a username and allowing SSH.

[mwolfmoode]

thank you very much, now i could edit audio output, and i have been able to setup UPNP client and Spotify connect