Posts: 13,496
Threads: 305
Joined: Mar 2018
Reputation:
545
Try the following:
- Disconnect local display and keyboard
- Power off
- Connect Ethernet cable
- Power up
Then from another computer on your network connect via SSH and post the output from the command mosbrief.
-Tim
Posts: 92
Threads: 14
Joined: Apr 2018
Reputation:
5
Which Pi are you using please?
I noticed a similar issue when using a Pi series 1.
There the issue was that the mosbuild moode was hanging on a bluetooth device that was not available (which is no surprise as it does not exist in a Pi 1).
My solution was actually disabling the service that started bluetooth. When done, it booted as expected.
Posts: 4
Threads: 1
Joined: May 2018
Reputation:
0
I use the ew Pi3 B+ - it has bluetooth, therefore this might not be the issue - but thanks to your reply!
Posts: 4
Threads: 1
Joined: May 2018
Reputation:
0
Hi Tim,
thank you - yes I booted up the PI with unmodified 2018-03-13 Raspbian Stretch Lite - and started the mosbuild, writing directly to SDcard,
maybe this is the issue (?)
The SDcard is brand new and has no issues.
I will try with a second USB SD card stick and will let you know.. :-)
Thanks again