Posts: 9
Threads: 4
Joined: Aug 2019
Reputation:
0
Hi,
I am using Moode Audio 5.3. on a Raspberry Pi 3b+ with an Allo Boss DAC. I left the settings mostly untouched since I am a newby.
The sound quality is very good, however, everytime I start a track, I hear a clearly noticeable litte crack. It sounds like something is switched on. The crack appears when listening via squeezelite as well as via upnp renderer.
My questions:
1) Any ideas how to fix this crack?
2) By the way, I am completely confused about ALSA volume with my Allo Boss DAC. I control the DAC via my smartphone. Is it correct to leave the settings to Software control and put in 100% ALSA volume?
Posts: 13,420
Threads: 304
Joined: Mar 2018
Reputation:
545
Those audio glitches are fairly common IME with PCM5xxx based DAC's. I think it's partly that the boards don't include any type of circuit for suppressing the glitches but I recall that there were a couple of bugs in the PCM51xxx kernel codec related to glitches that were supposed to haven fixed. Maybe there are other bugs? Also, if I remember correctly, Allo had enhanced their Boss driver to try and reduce the glitches.
Btw, I've never experienced any audio glitches on my two ESS Sabre based DACS: Mamboberry LS and Allo Katana.
If the DAC supports hardware volume then its usually best to select "Hardware" for volume control in MPD config. If you choose instead to select "Software" then ALSA volume should be left at 100% so that when MPD Software volume is at 100% the overall output of the DAC is 0dB (100%).
Posts: 89
Threads: 16
Joined: Apr 2019
Reputation:
2
08-13-2019, 05:56 PM
(This post was last modified: 08-13-2019, 05:57 PM by Jedrek.)
I have a HIFIBerry DAC+ Pro with PCM5122 and i don't hear any glitches (cracks) on MoodeAudio 5 or 6. I always set a volume control to "hardware"
Posts: 156
Threads: 6
Joined: Apr 2018
Reputation:
11
My IQaudIO Pi-Dac Pro's have PCM5242 DACs & I get an audible click at the start of each track when listening with software volume AND the headphone out ports. Listening to music on speakers via the RCA out does not produce a click.
Having ALSA volume set to hardware = no clicks via the headphone port or RCA.
Posts: 9
Threads: 4
Joined: Aug 2019
Reputation:
0
Great. Thanks. Switching to hardware control did the trick. No clicks and cracks anymore.
Posts: 13,420
Threads: 304
Joined: Mar 2018
Reputation:
545
Great info :-)
I guess YMMV with PCM5XXX
Posts: 9
Threads: 4
Joined: Aug 2019
Reputation:
0
Overjoyed!! The glitches and cracks are back! I changed nothing in my settings. Maybe I just overheard them shortly after I switched to hardware control...
I will let you know when I find a solution.
If someone has an idea as to what the cause of the problem might be, I am happy to hear suggestions.
