[SOLVED] Libray no longer loads on external drive

[Lizard_King]

Within the last 48 hours, I can no longer load the library from the external hard drive. The drive I was using was housed in an Oyen Digital enclosure with a 4.0 TB Seagate HDD and a dedicated power supply. The library builds then bombs with anh MPD socket error. I tried an older drive which had a library on and that ,loaded. Since then I wiped out that drive at the partition level and loaded new library and I get the same problem.

I have tried multiple cables and two different power supplies.

RPI 3B+ with the Allo Katana dac stack. Both drives work fine with win W10 Intel Nuc.

I use a 128 GB USB flash drive and that works.

Any suggestions?

[Lizard_King]

Problem solved. In System, I changed the Kernel Architecture from 64 bit to 32 bit, restarted Moode and now it works!

[TheOldPresbyope]

Problem solved. In System, I changed the Kernel Architecture from 64 bit to 32 bit, restarted Moode and now it works!

So go back to your first post and mark the thread "SOLVED".

[Lizard_King]

Problem solved. In System, I changed the Kernel Architecture from 64 bit to 32 bit, restarted Moode and now it works!

So go back to your first post and mark the thread "SOLVED".

How do I do that?

[Tim Curtis]

Edit your OP (original post), post #1

[Lizard_King]

i did change it to solved.