Native dsd no working

[praveen.sg8]

Your DAC does not process Native DSD...
https://www.musicalfidelity.com/v90-dac

Asynchronous data stream at up to 24-bit/96kHz

Change the setting to DOP .

Morever when i tried playing DSD on Volumio it was playing fine. Thats my doubt.Please help

[Tim Curtis]

Below is the ( i ) help for the DSD support option in MPD Config. There are only three possibilities including Native, DoP or automatic PCM conversion.

Native DSD: If the audio device reports that it supports Native DSD then MPD will send the unaltered DSD bitstream to the device otherwose MPD will perform DSD to PCM on-the-fly conversion.

DSD over PCM (DoP): There is no way to detect if an audio device supports DoP so only enable this if you are certain that the device support it otherwise the encapsulated DSD bitstream may cause loud or unpredictable distortion.

It looks like your audio device does not support native DSD or DoP and the USB connection is limited to only 24/96K. That means that when DSD support is set to "Native DSD (Default)" DSF file playback should automatically be converted to 96K PCM. This is done internally by MPD/ALSA and there are no explicit settings that control this. You could also set SoX resampling to 24/96K which would accomplish the same thing. 

You could also reboot and post the Moode startup log and also check the MPD log for any errors.

Code:

moodeutl -l

cat /var/log/mpd/log

[praveen.sg8]

Below is the ( i ) help for the DSD support option in MPD Config. There are only three possibilities including Native, DoP or automatic PCM conversion.

Native DSD: If the audio device reports that it supports Native DSD then MPD will send the unaltered DSD bitstream to the device otherwose MPD will perform DSD to PCM on-the-fly conversion.

DSD over PCM (DoP): There is no way to detect if an audio device supports DoP so only enable this if you are certain that the device support it otherwise the encapsulated DSD bitstream may cause loud or unpredictable distortion.

It looks like your audio device does not support native DSD or DoP and the USB connection is limited to only 24/96K. That means that when DSD support is set to "Native DSD (Default)" DSF file playback should automatically be converted to 96K PCM. This is done internally by MPD/ALSA and there are no explicit settings that control this. You could also set SoX resampling to 24/96K which would accomplish the same thing. 

You could also reboot and post the Moode startup log and also check the MPD log for any errors.

Code:

moodeutl -l

cat /var/log/mpd/log

set SoX resampling to 24/96K which would accomplish the same thing. 
Thanks this worked

[praveen.sg8]

Below is the ( i ) help for the DSD support option in MPD Config. There are only three possibilities including Native, DoP or automatic PCM conversion.

Native DSD: If the audio device reports that it supports Native DSD then MPD will send the unaltered DSD bitstream to the device otherwose MPD will perform DSD to PCM on-the-fly conversion.

DSD over PCM (DoP): There is no way to detect if an audio device supports DoP so only enable this if you are certain that the device support it otherwise the encapsulated DSD bitstream may cause loud or unpredictable distortion.

It looks like your audio device does not support native DSD or DoP and the USB connection is limited to only 24/96K. That means that when DSD support is set to "Native DSD (Default)" DSF file playback should automatically be converted to 96K PCM. This is done internally by MPD/ALSA and there are no explicit settings that control this. You could also set SoX resampling to 24/96K which would accomplish the same thing. 

You could also reboot and post the Moode startup log and also check the MPD log for any errors.

Code:

moodeutl -l

cat /var/log/mpd/log

set SoX resampling to 24/96K which would accomplish the same thing. 
Thanks this worked

Iam using ALL KATANA DAC with ISOLATOR and ALLO SHANTI POWER.
WHen playing DSD or DSF file  no Proper audio is coming.PLease help  if any settings needs to be changed to play DSD or DSF files in ALLO  KATANA WITH ISOLATOR DAC.

[praveen.sg8]

Iam using ALLO KATANA DAC with ISOLATOR Mounted and ALLO SHANTI POWER SUPPLY.

When playing DSD or DSF file  no Proper audio is coming(JUst hiss noise with blurred sound).Kindly  help,  if any settings needs to be changed to play DSD or DSF files while using  ALLO  KATANA DAC WITH ISOLATOR

[Tim Curtis]

Katana supports DSD over PCM (DoP), not Native DSD.
IIRC the first gen Isolator board only supports up to 192K and so limited to DSD64/DoP.

I think the consensus in the Katana community is that the Isolator board is not needed when running Katana with split power.