Posts: 17
Threads: 3
Joined: Jul 2021
Reputation:
0
(07-03-2021, 10:40 AM)Blobby Wrote: Whats the output from the command below?
Code:
Thanks Tim for the reply.
I won't be able to do this for a day or two - will post the requested info then..
Requested info....
With Named device set to Piano 2.1 or Piano and restarted
pi@moode:~ $ ./piano.sh
Invalid card number.
Invalid card number.
Invalid card number.
Invalid card number.
Invalid card number.
Invalid card number.
Dual mode:
Subw mode:
Sub xover:
Sub level:
Main levl:
Mstr levl:
pi@moode:~ $
With Named device set to none and restarted, then DToverlay set to allo-piano-dac-plus-pcm512x-audio and restarted
pi@moode:~ $ ./piano.sh
Invalid card number.
Invalid card number.
Invalid card number.
Invalid card number.
Invalid card number.
Invalid card number.
Dual mode:
Subw mode:
Sub xover:
Sub level:
Main levl:
Mstr levl:
pi@moode:~ $
with Moode 7.2.0 inserted, named device set as Allo Piano 2.1 Hi-Fi DAC
Moode works well
pi@moode:~ $ ./piano.sh
amixer: Unable to find simple control 'Digital',0
Dual mode: Dual-Stereo
Subw mode: None
Sub xover: 60
Sub level: 0%
Main levl:
Mstr levl: 74%
pi@moode:~ $
Posts: 13,429
Threads: 304
Joined: Mar 2018
Reputation:
545
Very odd.
I checked one of my systems and set the Named I2S device to "Allo Piano 2.1 Hi-Fi DAC" and verified that the correct overlay was set in /boot/config.txt
Code: pi@rp2:~ $ cat /boot/config.txt
disable_splash=1
disable_overscan=1
hdmi_drive=2
hdmi_blanking=1
hdmi_force_edid_audio=1
hdmi_force_hotplug=1
hdmi_group=0
dtparam=i2c_arm=on
dtparam=i2s=on
dtparam=audio=off
dtoverlay=allo-piano-dac-plus-pcm512x-audio
#dtoverlay=disable-wifi
#dtoverlay=disable-bt
pi@rp2:~ $
That would result in ALSA card 0 being assigned to the I2S device after rebooting. There should never be "Invalid card number." error for card 0. It will either be the I2S device or it will be assigned to integrated HDMI audio device on the Pi.
Try reboot and then post the Moode startup log.
Posts: 17
Threads: 3
Joined: Jul 2021
Reputation:
0
pi@moode:~ $ moodeutl -l
20210705 081858 worker: -- Start
20210705 081858 worker: Successfully daemonized
20210705 081858 worker: Integrity check (passed)
20210705 081859 worker: File check (OK)
20210705 081900 worker: Session vacuumed
20210705 081901 worker: Session loaded
20210705 081901 worker: Debug logging (OFF)
20210705 081901 worker: -- Audio debug
20210705 081901 worker: ALSA cards: (0:empty | 1:empty | 2:empty | 3:empty
20210705 081901 worker: MPD config: (0:Allo Piano 2.1 Hi-Fi DAC | mixer Master) | card:0)
20210705 081901 worker: ALSA mixer actual (Master)
20210705 081901 worker: ALSA Master volume set to (Invalid card number.)
20210705 081901 worker: -- System
20210705 081903 worker: Host (moode)
20210705 081903 worker: moOde (7.3.0 2021-06-25)
20210705 081903 worker: RaspiOS (10.6)
20210705 081903 worker: Kernel (5.4.77-v7+ #1371)
20210705 081903 worker: Platform (Pi-3B+ 1.3 1GB)
20210705 081903 worker: ARM arch (armv7l, 32-bit kernel)
20210705 081903 worker: MPD ver (0.22.8_p0x3)
20210705 081903 worker: CPU gov (ondemand)
20210705 081903 worker: USB boot enabled
20210705 081903 worker: File system expanded
20210705 081903 worker: HDMI port on
20210705 081903 worker: -- Network
20210705 081903 worker: eth0 exists
20210705 081903 worker: eth0 wait 0 for IP address
20210705 081906 worker: eth0 wait 1 for IP address
20210705 081909 worker: eth0 wait 2 for IP address
20210705 081912 worker: eth0 wait 3 for IP address
20210705 081915 worker: eth0 wait 4 for IP address
20210706 075611 worker: eth0 address not assigned
20210706 075611 worker: wlan0 exists
20210706 075611 worker: wifi country (AU)
20210706 075611 worker: wlan0 trying SSID (Innovaero Guest)
20210706 075611 worker: IP addr (172.16.12.7)
20210706 075611 worker: Netmask (255.255.255.0)
20210706 075611 worker: Gateway (172.16.12.254)
20210706 075611 worker: Pri DNS (1.1.1.1)
20210706 075611 worker: Domain (192.168.10.11)
20210706 075611 worker: Pi integrated wlan0 power save disabled
20210706 075611 worker: -- Audio config
20210706 075612 worker: MPD conf updated
20210706 075612 worker: ALSA card number (0)
20210706 075612 worker: MPD audio output (Allo Piano 2.1 Hi-Fi DAC)
20210706 075612 worker: WARNING: No device found at MPD configured card 0
20210706 075612 worker: ALSA mixer name (Master)
20210706 075612 worker: MPD volume control (hardware)
20210706 075612 worker: Hdwr volume controller exists
20210706 075612 worker: Max ALSA volume (100%)
20210706 075612 worker: ALSA output mode (Default: plughw)
20210706 075612 worker: ALSA loopback (Off)
20210706 075612 worker: Piano 2.1 output mode (Invalid card number.)
20210706 075613 worker: Piano 2.1 initialized
20210706 075613 worker: Reset renderer active flags
20210706 075613 worker: CamillaDSP (off)
20210706 075613 worker: -- MPD startup
20210706 075613 worker: MPD started
20210706 075614 worker: MPD accepting connections
20210706 075614 worker: MPD output 1 ALSA Default (on)
20210706 075614 worker: MPD output 2 ALSA Bluetooth (off)
20210706 075614 worker: MPD output 3 HTTP Server (off)
20210706 075614 worker: MPD crossfade (off)
20210706 075614 worker: MPD ignore CUE files (yes)
20210706 075614 worker: -- Feature availability
20210706 075614 worker: Source select (available)
20210706 075614 worker: Source select (source: MPD)
20210706 075614 worker: Source select (output: Allo Piano 2.1 Hi-Fi DAC)
20210706 075614 worker: Bluetooth pairing agent (started)
20210706 075614 worker: Bluetooth (available: started)
20210706 075614 worker: Airplay renderer (available)
20210706 075614 worker: Spotify renderer (available)
20210706 075614 worker: Squeezelite (available)
20210706 075614 worker: RoonBridge renderer (not installed)
20210706 075614 worker: UPnP renderer (available)
20210706 075614 worker: DLNA server (available)
20210706 075614 worker: UPnP browser (available)
20210706 075614 worker: GPIO button handler (available)
20210706 075614 worker: Stream recorder (n/a)
20210706 075614 worker: -- Music sources
20210706 075615 worker: USB source (Toons)
20210706 075615 worker: NAS and UPnP sources (none configured)
20210706 075615 worker: -- Other
20210706 075615 worker: USB volume knob (Off)
20210706 075615 worker: Shellinabox SSH started
20210706 075615 worker: USB auto-mounter (udisks-glue)
20210706 075615 worker: LED0 (On)
20210706 075615 worker: LED1 (On)
20210706 075615 worker: Saved MPD vol level (0)
20210706 075615 worker: Preamp volume level (0)
20210706 075615 worker: MPD volume level (0) restored
20210706 075615 worker: ALSA Master volume (Invalid card number.)
20210706 075615 worker: Auto-play (Off)
20210706 075615 worker: Maintenance interval (3 hours)
20210706 075615 worker: Screen saver activation (Never)
20210706 075615 worker: Session permissions (OK)
20210706 075615 worker: Watchdog started
20210706 075615 worker: Ready
pi@moode:~ $
Sorry for the formatting - on my phone
[img=379x97]olm://attachment/AQACAAAAyQAAAAAAAAAA9sICAAAAAAAA1AAAAAAAAnDsAAAAAAACwvYAAAAAAAJw7AIAAIAAAAAAKXdvZ2VyLndhbWpldEBnbWFpbC5jb21fSW50ZXJuZXRHb29nbGVfSHhT/AQABAACAAAAAAWoAAAAAAAAAAP_CAgAAAAAAAWcAAAAAAAJwPQAAAAAAAsL_AAAAAAACcD0%3D[/img]
Posts: 13,429
Threads: 304
Joined: Mar 2018
Reputation:
545
It's difficult to read your log output. Next time place it in a code box.
The log entry below shows ALSA card 0 and card 1 empty which means Linux doesn't see any audio hardware not even the integrated headphone jack which would be on card 1 in a Pi-3B+.
Code: 20210705 081901 worker: ALSA cards: (0:empty | 1:empty | 2:empty | 3:empty
Posts: 17
Threads: 3
Joined: Jul 2021
Reputation:
0
Is there anything I can do to solve this? As shown it works properly with 7.2.0 and 7.2.1.
Sorry, I don't know what a code box is....
Posts: 3
Threads: 0
Joined: Jul 2021
Reputation:
0
(07-05-2021, 05:19 AM)varunpj Wrote: Hi, I'm using moode audio in my digione signature. Using ethernet, all default settings.
In 7.3, Spotify connect is unusable. It keeps disconnecting, severe lag in controls and stuttering. Local files play perfectly.
I downgraded to 7.1, its working perfectly.
Are anyone else facing these issues?
Please help, any way to fix this?
Posts: 17
Threads: 3
Joined: Jul 2021
Reputation:
0
(07-06-2021, 01:02 AM)Blobby Wrote: Is there anything I can do to solve this? As shown it works properly with 7.2.0 and 7.2.1.
Sorry, I don't know what a code box is....
Tim,
I 'over the air' upgraded the 7.2.0 I have been using to what the upgrade check said was 7.2.1 - if I run moodeutl -l afterwards it reports that it is actually 7.3.0. This shows that the Piano2.1 is detected and is working correctly 
The feedback I gave you earlier was from a fresh SD card imaged with 7.3.0 (downloaded) and is not working as previously shown. I have re-imaged the card twice with the same results. ??? Maybe be a card problem? Odd none the less...
Anyway I am happy that the upgraded card works ok and would like to thank you for the help and time you may have spent with this.
Blobby
Posts: 1,869
Threads: 43
Joined: Mar 2020
Reputation:
85
(07-06-2021, 09:25 AM)varunpj Wrote: (07-05-2021, 05:19 AM)varunpj Wrote: Hi, I'm using moode audio in my digione signature. Using ethernet, all default settings.
In 7.3, Spotify connect is unusable. It keeps disconnecting, severe lag in controls and stuttering. Local files play perfectly.
I downgraded to 7.1, its working perfectly.
Are anyone else facing these issues?
Please help, any way to fix this?
I would attempt to re-upgrade, chances are something went a bit wrong with the upgrade. The Spotify renderer works well in all the scenarios I've tested on 7.3.0 with the exception of Spotify +ALSA loopback + CamillaDSP, where it play comically fast, but is still stable in its connection.
----------------
Robert
Posts: 3
Threads: 0
Joined: Jul 2021
Reputation:
0
(07-06-2021, 02:46 PM)the_bertrum Wrote: (07-06-2021, 09:25 AM)varunpj Wrote: (07-05-2021, 05:19 AM)varunpj Wrote: Hi, I'm using moode audio in my digione signature. Using ethernet, all default settings.
In 7.3, Spotify connect is unusable. It keeps disconnecting, severe lag in controls and stuttering. Local files play perfectly.
I downgraded to 7.1, its working perfectly.
Are anyone else facing these issues?
Please help, any way to fix this?
I would attempt to re-upgrade, chances are something went a bit wrong with the upgrade. The Spotify renderer works well in all the scenarios I've tested on 7.3.0 with the exception of Spotify +ALSA loopback + CamillaDSP, where it play comically fast, but is still stable in its connection.
Thank you. Its seems to work now.
Posts: 4
Threads: 1
Joined: Apr 2021
Reputation:
0
07-08-2021, 02:45 PM
(This post was last modified: 07-08-2021, 03:13 PM by lachaine.)
I just update (from moode update) from 7.2 to 7.3 and now i have no sound at all...
Cannot figure out what is the problem.
HELP
Just found the problem:
Alsa output mode was set at default, I have to change it to direct,,,, fiou....
( I did not change nothing before the update!!)
|
