Hi
I'm having a problem mounting the share which has my FLAC library.
Currently, my NAS is a USB drive shared from my DD-WRT router.
The share is a public share with no username or password
\\DD-WRT\Media\New FLAC
This root share (DD-WRT\Media) is visible and accepts connections from many device in the house. Devices include Windows, Squeezebox (windows LMS server to be fair), nvidia shield, roku, firetv etc.......
Within the NAS sourc>Create NAS source
Scan results in the share being visible
Type - SMB (Samba)
Server - DD-WRT/Media
User ID
Password
Name - FLAC
Various combinations of mount flags
vers=1.0,ro,dir_mode=0777,file_mode=0777
vers=2.0,ro,dir_mode=0777,file_mode=0777
vers=3.0,ro,dir_mode=0777,file_mode=0777
All result in the error
20180927 084209 wrk_sourcemount(): Mount error: (username specified with no parameter)
I've tried appending the mount flags with which it doesnt like as it errors and lists the switch options
vers=X.0,ro,dir_mode=0777,file_mode=0777,user=,password=
20180927 084552 wrk_sourcemount(): Mount error: (
Usage:
mount [-lhV]
mount -a [options]
mount [options] [--source] | [--target]
mount [options]
mount []
Mount a filesystem.
Options:
-a, --all mount all filesystems mentioned in fstab
-c, --no-canonicalize don't canonicalize paths
-f, --fake dry run; skip the mount(2) syscall
-F, --fork fork off for each device (use with -a)
-T, --fstab alternative file to /etc/fstab................................................................and so on
I've tried to adjust the share on DD-WRT by adding a second share which has a username and password then add the user and password to the Moode config
(share is picked up by scan)
Type - SMB (Samba)
Server - DD-WRT/FLAC
User ID - pi
Password - moodeaudio
Name - FLAC
Various combinations of mount flags
vers=1.0,ro,dir_mode=0777,file_mode=0777
vers=2.0,ro,dir_mode=0777,file_mode=0777
vers=3.0,ro,dir_mode=0777,file_mode=0777
This gives me the error
20180927 085511 wrk_sourcemount(): Mount error: (mount error(112): Host is down
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs))
So far as I can tell, the mount commands generated by the app specifically need a username and password.
My preference would be to mount this public share (public within my own private network) without any credentials.
Clearly I don't want to make changes that effect all of the other devices at home that access this NAS share on my router.
There seems to be quite a lot on various forums regarding problems with cifs mounts and this non descript error however I've not seen any definitive solution.
I realise this may be a configuration issue on either device but the fact that the share is visible everywhere else would suggest that in this case its a problem at the client end.
It cant be that difficult to mount a network share in linux can it????? lol
TIA
Ian
I'm having a problem mounting the share which has my FLAC library.
Currently, my NAS is a USB drive shared from my DD-WRT router.
The share is a public share with no username or password
\\DD-WRT\Media\New FLAC
This root share (DD-WRT\Media) is visible and accepts connections from many device in the house. Devices include Windows, Squeezebox (windows LMS server to be fair), nvidia shield, roku, firetv etc.......
Within the NAS sourc>Create NAS source
Scan results in the share being visible
Type - SMB (Samba)
Server - DD-WRT/Media
User ID
Password
Name - FLAC
Various combinations of mount flags
vers=1.0,ro,dir_mode=0777,file_mode=0777
vers=2.0,ro,dir_mode=0777,file_mode=0777
vers=3.0,ro,dir_mode=0777,file_mode=0777
All result in the error
20180927 084209 wrk_sourcemount(): Mount error: (username specified with no parameter)
I've tried appending the mount flags with which it doesnt like as it errors and lists the switch options
vers=X.0,ro,dir_mode=0777,file_mode=0777,user=,password=
20180927 084552 wrk_sourcemount(): Mount error: (
Usage:
mount [-lhV]
mount -a [options]
mount [options] [--source] | [--target]
mount [options]
mount []
Mount a filesystem.
Options:
-a, --all mount all filesystems mentioned in fstab
-c, --no-canonicalize don't canonicalize paths
-f, --fake dry run; skip the mount(2) syscall
-F, --fork fork off for each device (use with -a)
-T, --fstab alternative file to /etc/fstab................................................................and so on
I've tried to adjust the share on DD-WRT by adding a second share which has a username and password then add the user and password to the Moode config
(share is picked up by scan)
Type - SMB (Samba)
Server - DD-WRT/FLAC
User ID - pi
Password - moodeaudio
Name - FLAC
Various combinations of mount flags
vers=1.0,ro,dir_mode=0777,file_mode=0777
vers=2.0,ro,dir_mode=0777,file_mode=0777
vers=3.0,ro,dir_mode=0777,file_mode=0777
This gives me the error
20180927 085511 wrk_sourcemount(): Mount error: (mount error(112): Host is down
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs))
So far as I can tell, the mount commands generated by the app specifically need a username and password.
My preference would be to mount this public share (public within my own private network) without any credentials.
Clearly I don't want to make changes that effect all of the other devices at home that access this NAS share on my router.
There seems to be quite a lot on various forums regarding problems with cifs mounts and this non descript error however I've not seen any definitive solution.
I realise this may be a configuration issue on either device but the fact that the share is visible everywhere else would suggest that in this case its a problem at the client end.
It cant be that difficult to mount a network share in linux can it????? lol
TIA
Ian
