Posts: 48
Threads: 7
Joined: Jan 2021
Reputation:
0
03-09-2022, 05:37 PM
(This post was last modified: 03-22-2022, 12:39 PM by dad33.)
Hello Community,
i listend always to radio stations in moode.
With the actual version a cannot switch to different stations more than 6-8 times without crash.
One year ago no problems.
Next problem: switching to a Station which is offline is very bad cause i cannot switch to another station...moode crashed.
I cleared the cache in the system settings with no succsess.
Can you help?
Posts: 1,538
Threads: 106
Joined: Mar 2018
Reputation:
73
Need a bit more information than that. 
reboot and post the MoOde startup log...
----------
bob
Posts: 48
Threads: 7
Joined: Jan 2021
Reputation:
0
03-10-2022, 02:49 PM
(This post was last modified: 03-12-2022, 07:33 AM by DRONE7.
Edit Reason: code tags
)
(03-09-2022, 08:02 PM)DRONE7 Wrote: Need a bit more information than that.
reboot and post the MoOde startup log...
Code: 20220309 175118 worker: Max ALSA volume (100%)
20220309 175118 worker: ALSA output mode (Direct: hw)
20220309 175118 worker: ALSA loopback (Off)
20220309 175118 worker: Reset renderer active flags
20220309 175118 worker: CamillaDSP (off)
20220309 175118 worker: -- MPD startup
20220309 175118 worker: MPD started
20220309 175119 worker: MPD accepting connections
20220309 175119 worker: MPD output 1 ALSA Default (on)
20220309 175119 worker: MPD output 2 ALSA Bluetooth (off)
20220309 175119 worker: MPD output 3 HTTP Server (off)
20220309 175119 worker: MPD crossfade (off)
20220309 175119 worker: MPD ignore CUE files (yes)
20220309 175119 worker: -- Feature availability
20220309 175119 worker: Source select (available)
20220309 175119 worker: Source select (source: MPD)
20220309 175119 worker: Source select (output: Pi Headphone jack)
20220309 175126 worker: Bluetooth pairing agent (started)
20220309 175126 worker: Bluetooth (available: started)
20220309 175126 worker: Airplay renderer (available)
20220309 175126 worker: Spotify renderer (available)
20220309 175126 worker: Squeezelite (available)
20220309 175126 worker: RoonBridge renderer (not installed)
20220309 175126 worker: Multiroom sender (available)
20220309 175126 worker: Multiroom receiver (available)
20220309 175126 worker: UPnP renderer (available)
20220309 175126 worker: DLNA server (available)
20220309 175126 worker: UPnP browser (available)
20220309 175126 worker: GPIO button handler (available)
20220309 175126 worker: Stream recorder (n/a)
20220309 175126 worker: -- Music sources
20220309 175126 worker: USB sources (none attached)
20220309 175126 worker: NAS and UPnP sources (none configured)
20220309 175126 worker: -- Other
20220309 175126 worker: USB volume knob (Off)
20220309 175126 worker: USB auto-mounter (udisks-glue)
20220309 175126 worker: LED0 (On)
20220309 175126 worker: LED1 (On)
20220309 175126 worker: Saved MPD vol level (0)
20220309 175126 worker: Preamp volume level (0)
20220309 175126 worker: MPD volume level (74) restored
20220309 175126 worker: ALSA Headphone volume (93%)
20220309 175126 worker: Auto-play (On)
20220309 175126 worker: Auto-playing id ()
20220309 175126 worker: Maintenance interval (3 hours)
20220309 175126 worker: Screen saver activation (Never)
20220309 175126 worker: Session permissions (OK)
20220309 175126 worker: Watchdog started
20220309 175126 worker: Ready
pi@moodeLounge:~$
Posts: 1,538
Threads: 106
Joined: Mar 2018
Reputation:
73
Where is the rest of the log ? that looks to be only the last entries...
----------
bob
Posts: 48
Threads: 7
Joined: Jan 2021
Reputation:
0
Started ssh.. Login and than
moodeutl -l
Thats the complet output list. I copy the list and paste here...
Posts: 1,538
Threads: 106
Joined: Mar 2018
Reputation:
73
03-11-2022, 11:39 PM
(This post was last modified: 03-11-2022, 11:45 PM by DRONE7.)
Scroll up in the ssh window and then copy/paste the whole output...
Should look like this...
Code: $ moodeutl -l
20220309 195104 worker: -- Start
20220312 104010 worker: Successfully daemonized
20220312 104011 worker: Integrity check (passed)
20220312 104035 worker: File check (OK)
20220312 104035 worker: Session vacuumed
20220312 104035 worker: Session loaded
20220312 104035 worker: Debug logging (OFF)
20220312 104035 worker: -- Audio debug
20220312 104035 worker: ALSA cards: (0:b1 | 1:Headphones | 2:D20 | 3:empty
20220312 104035 worker: MPD config: (2:DIYINHK USB Audio 2.0 | mixer:(DIYINHK USB Audio 2.0 ) | card:2)
20220312 104035 worker: ALSA mixer actual (DIYINHK USB Audio 2.0 )
20220312 104036 worker: ALSA DIYINHK USB Audio 2.0 volume set to (0%)
20220312 104036 worker: -- System
20220312 104038 worker: Host (argonone)
20220312 104038 worker: moOde (7.6.1 2021-12-17)
20220312 104038 worker: RaspiOS (10.6)
20220312 104038 worker: Kernel (5.4.77-v7l+ #1371)
20220312 104038 worker: Platform (Pi-4B 1.1 4GB)
20220312 104038 worker: ARM arch (armv7l, 32-bit kernel)
20220312 104038 worker: MPD ver (0.23.4_p0x3)
20220312 104038 worker: CPU gov (performance)
20220312 104038 worker: USB boot not available
20220312 104038 worker: File system expanded
20220312 104038 worker: HDMI port off
20220312 104038 worker: -- Network
20220312 104038 worker: IP address check timeout (90 secs)
20220312 104038 worker: eth0 adapter exists
20220312 104038 worker: eth0 IP address check (No)
20220312 104038 worker: IP addr (192.168.xxx.xx)
20220312 104038 worker: Netmask (255.255.255.0)
20220312 104038 worker: Gateway (192.168.xxx.xx)
20220312 104038 worker: Pri DNS (192.168.xxx.x)
20220312 104038 worker: Domain (xxx.box)
20220312 104038 worker: wlan0 adapter does not exist
20220312 104038 worker: -- Audio config
20220312 104038 worker: MPD conf update skipped (USB device)
20220312 104038 worker: ALSA card number (2)
20220312 104038 worker: MPD audio output (DIYINHK USB Audio 2.0)
20220312 104038 worker: Audio formats (S16_LE, S32_LE, SPECIAL, DSD_U32_BE)
20220312 104038 worker: ALSA mixer name (DIYINHK USB Audio 2.0 )
20220312 104038 worker: MPD mixer type (fixed 0dB)
20220312 104039 worker: Hdwr volume controller exists
20220312 104039 worker: Max ALSA volume (93%)
20220312 104039 worker: ALSA output mode (Default: plughw)
20220312 104039 worker: ALSA loopback (Off)
20220312 104039 worker: Reset renderer active flags
20220312 104039 worker: CamillaDSP (off)
20220312 104039 worker: -- MPD startup
20220312 104039 worker: MPD started
20220312 104039 worker: MPD accepting connections
20220312 104039 worker: MPD output 1 ALSA Default (on)
20220312 104039 worker: MPD output 2 ALSA Bluetooth (off)
20220312 104039 worker: MPD output 3 HTTP Server (off)
20220312 104039 worker: MPD crossfade (off)
20220312 104039 worker: MPD ignore CUE files (yes)
20220312 104039 worker: -- Feature availability
20220312 104039 worker: Source select (available)
20220312 104039 worker: Source select (source: MPD)
20220312 104039 worker: Source select (output: DIYINHK USB Audio 2.0)
20220312 104039 worker: Bluetooth (available)
20220312 104039 worker: Airplay renderer (available)
20220312 104039 worker: Spotify renderer (available)
20220312 104039 worker: Squeezelite (available)
20220312 104039 worker: RoonBridge renderer (not installed)
20220312 104039 worker: Multiroom sender (available)
20220312 104039 worker: Multiroom receiver (available)
20220312 104039 worker: UPnP renderer (available)
20220312 104039 worker: DLNA server (available)
20220312 104039 worker: UPnP browser (available)
20220312 104039 worker: GPIO button handler (available)
20220312 104039 worker: Stream recorder (n/a)
20220312 104039 worker: -- Music sources
20220312 104039 worker: USB sources (none attached)
20220312 104050 sourceMount(): Mount error: (mount error: could not resolve address for omvt620: Unknown error)
20220312 104053 worker: NAS and UPnP sources (mountall initiated)
20220312 104053 worker: -- Other
20220312 104053 worker: USB volume knob (Off)
20220312 104053 worker: USB auto-mounter (udisks-glue)
20220312 104053 worker: LED0 (On)
20220312 104053 worker: LED1 (On)
20220312 104053 worker: Saved MPD vol level (0)
20220312 104053 worker: Preamp volume level (0)
20220312 104053 worker: MPD volume level (0) restored
20220312 104053 worker: ALSA DIYINHK USB Audio 2.0 volume (94%)
20220312 104053 worker: Auto-play (Off)
20220312 104053 worker: Maintenance interval (3 hours)
20220312 104053 worker: Screen saver activation (Never)
20220312 104053 worker: Session permissions (OK)
20220312 104053 worker: Watchdog started
20220312 104053 worker: Ready
pi@argonone:~ $
----------
bob
Posts: 48
Threads: 7
Joined: Jan 2021
Reputation:
0
I checked it with an apple Safari browser now.
Here i can switch between the channels with no problems ore delay.
Firefox browser on android works also better.
Have you heared about this problem?
Posts: 1,538
Threads: 106
Joined: Mar 2018
Reputation:
73
03-12-2022, 06:59 AM
(This post was last modified: 03-12-2022, 07:11 AM by DRONE7.)
(03-12-2022, 05:52 AM)dad33 Wrote: I checked it with an apple Safari browser now.
Here i can switch between the channels with no problems ore delay.
Firefox browser on android works also better.
Have you heared about this problem?
Quote:Have you heared about this problem?
No and it is not a problem for users...just you and you fail to provide any debugging info....
Post the requested files or no one can help .... 
MarkW4 nailed it at DIY-Audio....
Quote:You are more likely to get useful responses if you are very specific about what you are trying to do, what exact hardware you have (which part number Bluetooth module, which version of RPi, etc.), your experience level and or design/construction/programming skills, how much research you have done so far, if you are stuck at some point and need specific help, if you are looking for tutoring in general, if you already tried something and its not working, etc. OTOH, people who ask very vague questions may not get any responses at all. Reason is because the subject matter is vast, nobody can explain it all in one post.
----------
bob
Posts: 48
Threads: 7
Joined: Jan 2021
Reputation:
0
03-12-2022, 12:15 PM
(03-12-2022, 06:59 AM)AudioDev: Pi Headphone jack Wrote: Now its complet and i am very excited for your reply
I also have a very long experience in IT 
____ __ ____
__ _ ___ / __ \___/ /__ /_ /
/ ' \/ _ \/ /_/ / _ / -_) / /
/_/_/_/\___/\____/\_,_/\__/ /_/
moOde audio player
Release 7.6.1 2021-12-17
© 2014 Tim Curtis
The programs included with moOde are free software; the
exact distribution terms for each program are described
in the individual files in /usr/share/doc/*/copyright or
in the moOde source files. moOde comes with absolutely
no warranties either expressed or implied, or any other
such guarantees.
Last login: Sat Mar 12 13:04:55 2022 from 192.168.178.20
pi@moodeLounge:~ $ moodeutl -l
20220312 121449 worker: -- Start
20220312 121449 worker: Successfully daemonized
20220312 121449 worker: Integrity check (passed)
20220312 121450 worker: File check (OK)
20220312 121450 worker: Session vacuumed
20220312 121450 worker: Session loaded
20220312 121450 worker: Debug logging (OFF)
20220312 121450 worker: -- Audio debug
20220312 121450 worker: ALSA cards: (0:b1 | 1:Headphones | 2:empty
| 3:empty
20220312 121450 worker: MPD config: (1 i Headphone jack | mixer H
eadphone) | card:1)
20220312 121451 worker: ALSA mixer actual (Headphone)
20220312 121451 worker: ALSA Headphone volume set to (0%)
20220312 121451 worker: -- System
20220312 121452 worker: Host (moodeLounge)
20220312 121452 worker: moOde (7.6.1 2021-12-17)
20220312 121452 worker: RaspiOS (10.6)
20220312 121452 worker: Kernel (5.4.77-v7l+ #1371)
20220312 121452 worker: Platform (Pi-4B 1.2 4GB)
20220312 121452 worker: ARM arch (armv7l, 32-bit kernel)
20220312 121452 worker: MPD ver (0.23.4_p0x3)
20220312 121452 worker: CPU gov (ondemand)
20220312 121452 worker: USB boot not available
20220312 121452 worker: File system not expanded yet
20220312 121452 worker: HDMI port off
20220312 121452 worker: -- Network
20220312 121452 worker: IP address check timeout (90 secs)
20220312 121452 worker: eth0 adapter exists
20220312 121452 worker: eth0 IP address check (No)
20220312 121452 worker: eth0 address not assigned
20220312 121452 worker: wlan0 adapter exists
20220312 121452 worker: wifi country (DE)
20220312 121452 worker: wlan0 trying SSID (FritzMaster)
20220312 121452 worker: IP addr (192.168.178.41)
20220312 121452 worker: Netmask (255.255.255.0)
20220312 121452 worker: Gateway (192.168.178.1)
20220312 121452 worker: Pri DNS (192.168.178.1)
20220312 121452 worker: Domain (fritz.box)
20220312 121452 worker: Pi integrated wlan0 power save disabled
20220312 121452 worker: -- Audio config
20220312 121452 worker: MPD conf update skipped (USB device)
20220312 121452 worker: ALSA card number (1)
20220312 121452 worker: MPD audio output (Pi Headphone jack)
20220312 121453 worker: Audio formats (U8, S16_LE)
20220312 121453 worker: ALSA mixer name (Headphone)
20220312 121453 worker: MPD mixer type (hardware)
20220312 121453 worker: Hdwr volume controller exists
20220312 121453 worker: Max ALSA volume (100%)
20220312 121453 worker: ALSA output mode (Direct: hw)
20220312 121453 worker: ALSA loopback (Off)
20220312 121453 worker: Reset renderer active flags
20220312 121453 worker: CamillaDSP (off)
20220312 121453 worker: -- MPD startup
20220312 121453 worker: MPD started
20220312 121453 worker: MPD accepting connections
20220312 121453 worker: MPD output 1 ALSA Default (on)
20220312 121453 worker: MPD output 2 ALSA Bluetooth (off)
20220312 121453 worker: MPD output 3 HTTP Server (off)
20220312 121453 worker: MPD crossfade (off)
20220312 121453 worker: MPD ignore CUE files (yes)
20220312 121453 worker: -- Feature availability
20220312 121453 worker: Source select (available)
20220312 121453 worker: Source select (source: MPD)
20220312 121454 worker: Source select (output: Pi Headphone jack)
20220312 121501 worker: Bluetooth pairing agent (started)
20220312 121501 worker: Bluetooth (available: started)
20220312 121501 worker: Airplay renderer (available)
20220312 121501 worker: Spotify renderer (available)
20220312 121501 worker: Squeezelite (available)
20220312 121501 worker: RoonBridge renderer (not installed)
20220312 121501 worker: Multiroom sender (available)
20220312 121501 worker: Multiroom receiver (available)
20220312 121501 worker: UPnP renderer (available)
20220312 121501 worker: DLNA server (available)
20220312 121501 worker: UPnP browser (available)
20220312 121501 worker: GPIO button handler (available)
20220312 121501 worker: Stream recorder (n/a)
20220312 121501 worker: -- Music sources
20220312 121501 worker: USB sources (none attached)
20220312 121501 worker: NAS and UPnP sources (none configured)
20220312 121501 worker: -- Other
20220312 121501 worker: USB volume knob (Off)
20220312 121501 worker: USB auto-mounter (udisks-glue)
20220312 121501 worker: LED0 (On)
20220312 121501 worker: LED1 (On)
20220312 121501 worker: Saved MPD vol level (0)
20220312 121501 worker: Preamp volume level (0)
20220312 121501 worker: MPD volume level (42) restored
20220312 121501 worker: ALSA Headphone volume (79%)
20220312 121501 worker: Auto-play (On)
20220312 121501 worker: Auto-playing id (4)
20220312 121501 worker: Maintenance interval (3 hours)
20220312 121501 worker: Screen saver activation (Never)
20220312 121501 worker: Session permissions (OK)
20220312 121501 worker: Watchdog started
20220312 121501 worker: Ready
pi@moodeLounge:~ $
DRONE7
(03-12-2022, 05:52 AM)dad33 Wrote: I checked it with an apple Safari browser now.
Here i can switch between the channels with no problems ore delay.
Firefox browser on android works also better.
Have you heared about this problem?
Quote:Have you heared about this problem?
No and it is not a problem for users...just you and you fail to provide any debugging info....
Post the requested files or no one can help ....
MarkW4 nailed it at DIY-Audio....
Quote:You are more likely to get useful responses if you are very specific about what you are trying to do, what exact hardware you have (which part number Bluetooth module, which version of RPi, etc.), your experience level and or design/construction/programming skills, how much research you have done so far, if you are stuck at some point and need specific help, if you are looking for tutoring in general, if you already tried something and its not working, etc. OTOH, people who ask very vague questions may not get any responses at all. Reason is because the subject matter is vast, nobody can explain it all in one post.
Posts: 13,424
Threads: 304
Joined: Mar 2018
Reputation:
545
The log looks ok.
What Browser is causing the issue?
|
