[How to do instruction] [How to?]change ratio for Local UI display for a 16/9 TV

[El bubar]

hi!
moode is installed on an RPI 4 itself connected to a TV via HDMI. the display ratio is not the 16:9 ratio with the "local UI display" (black bands on the sides) is there a setting (config file etc.) to obtain a 16/9 display with the local UI display ? thank you

[Tim Curtis]

Does the output from the command below match the resolution of the display?

Code:

echo $(fbset -s | awk '$1 == "geometry" { print $2","$3 }')

[El bubar]

the command return 1920, 1280...
that all i can see no change on screen even with a restart Local UI (I'm rookie... with linux)

[Tim Curtis]

Check your TV settings to make sure it's not doing some sort of automatic screen sizing.

[El bubar]

I'll check it before. no settings for the screen sizing. try to change the hdmi port etc.

[Tim Curtis]

If 1920 x 1280 is not the correct resolution for your tv then try adding appropriate display settings to /boot/config.txt file.
https://www.raspberrypi.com/documentatio...ay-options

[El bubar]

thank Tim for this info je jette un oeil !

[El bubar]

C ok ! with few modification in the config.txt ! merci pour le coup de main!