Two Questions

[Lttlwing16]

I did notice the "eth0 wait" entries in the log you posted. Normally those will not appear because residential Routers typically hand out IP addresss instantly.

You should post your IP address assignments instead of xxxxx in case something is not right. They are all going to be private LAN addresses anyway like 192.168.1.1 that are inaccessible from the Public internet.

Code:

20220218 192214 worker: -- Network
20220218 192214 worker: IP address check timeout (90 secs)
20220218 192214 worker: eth0 adapter exists
20220218 192214 worker: eth0 IP address check (Yes)
20220218 192214 worker: eth0 wait 0 for IP address
20220218 192216 worker: eth0 wait 1 for IP address
20220218 192218 worker: eth0 wait 2 for IP address
20220218 192220 worker: eth0 wait 3 for IP address
20220218 192222 worker: eth0 wait 4 for IP address
20220218 192224 worker: eth0 wait 5 for IP address
20220218 192226 worker: eth0 wait 6 for IP address
20220218 192229 worker: eth0 wait 7 for IP address
20220218 192231 worker: eth0 wait 8 for IP address
20220218 192233 worker: IP addr (xxxxxxx)
20220218 192233 worker: Netmask (xxxxxxxx)
20220218 192233 worker: Gateway (xxxxxxxx)
20220218 192233 worker: Pri DNS (xxxxxxxx)
20220218 192233 worker: Domain  (xxxxxxxxx)
2

Thanks Tim, those are there because when I restart MoOde I typically unplug the ethernet cable. If I leave it plugged in on restart I often cannot connect to moOde. If I unplug the ethernet cable until after the system boots, then plugin, it connects everytime.. I haven't been able to pin that down either because it is also transient. I have moOde with a DHCP address reservation of 192.168.1.140 on my local network, Netgear Nighthawk router. Not sure if that's the issue or not. 

Here is the network info: 

Code:

20220221 195431 worker: IP addr (192.168.1.140)
20220221 195431 worker: Netmask (255.255.255.0)
20220221 195431 worker: Gateway (192.168.1.1)
20220221 195431 worker: Pri DNS (1.0.0.1)
20220221 195431 worker: Domain  (1.1.1.1)

That said, I came home from work, attempted playback of a 24/96 file on the connected USB drive, hesitated and stuttered horribly. Turned on a single 16/44.1 rip, let it play. Went back to the same file on the USB drive and it played without a single hiccup..

PM'ing you guys the .flac file that didn't want to play, then did.


Here are the logs: 

mpd: 

Code:

Feb 21 19:32 : player: played "USB/DC14-485D/Lonesome Dreams/01 Ends of the Earth.flac"
Feb 21 19:35 : player: played "NAS/Manjaro/Music/Beck/Modern Guilt/01 - Orphans.flac"
Feb 21 19:47 : player: played "USB/DC14-485D/Lonesome Dreams/01 Ends of the Earth.flac"

moode.log

Code:

20220221 175601 worker: -- Start
20220221 175602 worker: Successfully daemonized
20220221 175602 worker: Integrity check (passed)
20220221 175602 worker: File check (OK)
20220221 175603 worker: Session vacuumed
20220221 175603 worker: Session loaded
20220221 175603 worker: Debug logging (OFF)
20220221 175603 worker: -- Audio debug
20220221 175603 worker: ALSA cards: (0:sndallodigione | 1:empty | 2:empty | 3:empty
20220221 175603 worker: MPD config: (0:Allo DigiOne | mixer:(none) | card:0)
20220221 175603 worker: ALSA mixer actual (none)
20220221 175603 worker: ALSA volume (none)
20220221 175603 worker: -- System
20220221 175606 worker: Host     (moode)
20220221 175606 worker: moOde    (7.6.1 2021-12-17)
20220221 175606 worker: RaspiOS  (10.6)
20220221 175606 worker: Kernel   (5.4.77-v7+ #1371)
20220221 175606 worker: Platform (Pi-3B+ 1.3 1GB)
20220221 175606 worker: ARM arch (armv7l, 32-bit kernel)
20220221 175606 worker: MPD ver  (0.23.4_p0x3)
20220221 175606 worker: CPU gov  (performance)
20220221 175606 worker: USB boot enabled
20220221 175606 worker: File system expanded
20220221 175606 worker: HDMI port off
20220221 175606 worker: -- Network
20220221 175606 worker: IP address check timeout (90 secs)
20220221 175606 worker: eth0 adapter exists
20220221 175606 worker: eth0 IP address check (Yes)
20220221 175606 worker: eth0 wait 0 for IP address
20220221 175608 worker: eth0 wait 1 for IP address
20220221 175610 worker: eth0 wait 2 for IP address
20220221 175612 worker: eth0 wait 3 for IP address
20220221 175621 worker: eth0 wait 4 for IP address
20220221 175623 worker: eth0 wait 5 for IP address
20220221 175625 worker: eth0 wait 6 for IP address
20220221 175627 worker: eth0 wait 7 for IP address
20220221 175630 worker: eth0 wait 8 for IP address
20220221 175632 worker: eth0 wait 9 for IP address
20220221 175634 worker: eth0 wait 10 for IP address
20220221 175636 worker: eth0 wait 11 for IP address
20220221 175638 worker: eth0 wait 12 for IP address
20220221 175640 worker: eth0 wait 13 for IP address
20220221 175642 worker: eth0 wait 14 for IP address
20220221 175644 worker: eth0 wait 15 for IP address
20220221 175646 worker: eth0 wait 16 for IP address
20220221 175648 worker: eth0 wait 17 for IP address
20220221 175650 worker: eth0 wait 18 for IP address
20220221 175652 worker: eth0 wait 19 for IP address
20220221 175654 worker: eth0 wait 20 for IP address
20220221 175656 worker: eth0 wait 21 for IP address
20220221 175658 worker: eth0 wait 22 for IP address
20220221 175700 worker: eth0 wait 23 for IP address
20220221 175702 worker: eth0 wait 24 for IP address
20220221 175704 worker: eth0 wait 25 for IP address
20220221 175706 worker: eth0 wait 26 for IP address
20220221 175708 worker: eth0 wait 27 for IP address
20220221 175710 worker: eth0 wait 28 for IP address
20220221 175712 worker: eth0 wait 29 for IP address
20220221 175714 worker: eth0 wait 30 for IP address
20220221 175717 worker: eth0 wait 31 for IP address
20220221 175719 worker: eth0 wait 32 for IP address
20220221 175721 worker: eth0 wait 33 for IP address
20220221 175723 worker: eth0 wait 34 for IP address
20220221 175725 worker: eth0 wait 35 for IP address
20220221 175727 worker: eth0 wait 36 for IP address
20220221 175729 worker: eth0 wait 37 for IP address
20220221 175731 worker: eth0 wait 38 for IP address
20220221 175733 worker: eth0 wait 39 for IP address
20220221 175735 worker: eth0 wait 40 for IP address
20220221 175737 worker: eth0 wait 41 for IP address
20220221 175739 worker: eth0 wait 42 for IP address
20220221 175742 worker: eth0 wait 43 for IP address
20220221 175744 worker: eth0 wait 44 for IP address
20220221 175746 worker: eth0 address not assigned
20220221 175746 worker: wlan0 adapter does not exist
20220221 175746 worker: no active network interface
20220221 175746 worker: -- Audio config
20220221 175747 worker: MPD conf updated
20220221 175747 worker: ALSA card number (0)
20220221 175747 worker: MPD audio output (Allo DigiOne)
20220221 175747 worker: Audio formats (S16_LE, S24_LE)
20220221 175747 worker: ALSA mixer name (none)
20220221 175747 worker: MPD mixer type (fixed 0dB)
20220221 175747 worker: Hdwr volume controller not detected
20220221 175747 worker: ALSA output mode (Direct: hw)
20220221 175748 worker: ALSA loopback (Off)
20220221 175748 worker: Reset renderer active flags
20220221 175748 worker: CamillaDSP (off)
20220221 175748 worker: -- MPD startup
20220221 175748 worker: MPD started
20220221 175748 worker: MPD accepting connections
20220221 175748 worker: MPD output 1 ALSA Default (on)
20220221 175748 worker: MPD output 2 ALSA Bluetooth (off)
20220221 175748 worker: MPD output 3 HTTP Server (off)
20220221 175748 worker: MPD crossfade (off)
20220221 175748 worker: MPD ignore CUE files (yes)
20220221 175748 worker: -- Feature availability
20220221 175748 worker: Source select (available)
20220221 175748 worker: Source select (source: MPD)
20220221 175748 worker: Source select (output: Allo DigiOne)
20220221 175748 worker: Bluetooth (available)
20220221 175748 worker: Airplay renderer (available)
20220221 175748 worker: Spotify renderer (available: started)
20220221 175748 worker: Squeezelite (available)
20220221 175748 worker: RoonBridge renderer (not installed)
20220221 175748 worker: Multiroom sender (available)
20220221 175748 worker: Multiroom receiver (available)
20220221 175748 worker: UPnP renderer (available)
20220221 175748 worker: DLNA server (available)
20220221 175748 worker: UPnP browser (available)
20220221 175748 worker: GPIO button handler (available)
20220221 175748 worker: Stream recorder (n/a)
20220221 175748 worker: -- Music sources
20220221 175748 worker: USB source (DC14-485D)
20220221 175749 sourceMount(): Mount error: (mount.nfs: Network is unreachable)
20220221 175749 worker: NAS and UPnP sources (mountall initiated)
20220221 175749 worker: -- Other
20220221 175749 worker: USB volume knob (Off)
20220221 175749 worker: Shellinabox SSH started
20220221 175749 worker: USB auto-mounter (udisks-glue)
20220221 175750 worker: LED0 (On)
20220221 175750 worker: LED1 (On)
20220221 175750 worker: Saved MPD vol level (0)
20220221 175750 worker: Preamp volume level (0)
20220221 175753 worker: MPD volume level (0) restored
20220221 175753 worker: ALSA volume level (None)
20220221 175753 worker: Auto-play (Off)
20220221 175753 worker: LocalUI started
20220221 175753 worker: Maintenance interval (3 hours)
20220221 175753 worker: Screen saver activation (Never)
20220221 175753 worker: Session permissions (OK)
20220221 175754 worker: Watchdog started
20220221 175754 worker: Ready
20220221 191933 worker: Job localui
20220221 191954 worker: Job clearsyslogs
20220221 192405 worker: Job clearsyslogs

syslog

Code:

Feb 21 19:25:28 moode systemd[1]: Created slice User Slice of UID 1000.
Feb 21 19:25:28 moode systemd[1]: Starting User Runtime Directory /run/user/1000...
Feb 21 19:25:28 moode systemd[1]: Started User Runtime Directory /run/user/1000.
Feb 21 19:25:28 moode systemd[1]: Starting User Manager for UID 1000...
Feb 21 19:25:28 moode systemd[8094]: Listening on GnuPG network certificate management daemon.
Feb 21 19:25:28 moode systemd[8094]: Listening on GnuPG cryptographic agent and passphrase cache (access for web browsers).
Feb 21 19:25:28 moode systemd[8094]: Listening on GnuPG cryptographic agent (ssh-agent emulation).
Feb 21 19:25:28 moode systemd[8094]: Reached target Paths.
Feb 21 19:25:28 moode systemd[8094]: Listening on GnuPG cryptographic agent and passphrase cache.
Feb 21 19:25:28 moode systemd[8094]: Listening on GnuPG cryptographic agent and passphrase cache (restricted).
Feb 21 19:25:28 moode systemd[8094]: Starting D-Bus User Message Bus Socket.
Feb 21 19:25:28 moode systemd[8094]: Reached target Timers.
Feb 21 19:25:28 moode systemd[8094]: Listening on D-Bus User Message Bus Socket.
Feb 21 19:25:28 moode systemd[8094]: Reached target Sockets.
Feb 21 19:25:28 moode systemd[8094]: Reached target Basic System.
Feb 21 19:25:28 moode systemd[8094]: Reached target Default.
Feb 21 19:25:28 moode systemd[8094]: Startup finished in 275ms.
Feb 21 19:25:28 moode systemd[1]: Started User Manager for UID 1000.
Feb 21 19:25:28 moode systemd[1]: Started Session 1 of user pi.
Feb 21 19:32:13 moode kernel: [ 5669.570013] bcm2835-i2s 3f203000.i2s: I2S SYNC error!
Feb 21 19:42:10 moode kernel: [ 6266.413720] bcm2835-i2s 3f203000.i2s: I2S SYNC error!
Feb 21 19:47:30 moode kernel: [ 6585.939487] bcm2835-i2s 3f203000.i2s: I2S SYNC error!

[Tim Curtis]

Couple of odd log entries

This is a strange DNS address. Normally a residential Router would assign its LAN address as the DNS address since it acts as a DNS proxy. In your case I would have expected DNS address to be 192.168.1.1, same as Gateway address.

Code:

20220221 195431 worker: Pri DNS (1.0.0.1)

What is the output from the command below?

Code:

cat /etc/resolv.conf

This error typically indicates some sort of OS corruption or hardware issue.

Code:

Feb 21 19:32:13 moode kernel: [ 5669.570013] bcm2835-i2s 3f203000.i2s: I2S SYNC error!

If you end up trying a fresh 761 image on a known good uSD Card I'd suggest using automatic DHCP address instead of a configured DHCP reservation to rule out some sort of address conflict.

[TheOldPresbyope]

Ugh, that I2S error looks nasty.

The DNS server IP address, not so much. Both 1.1.1.1 and 1.0.0.1 are free DNS servers maintained by CloudFlare, akin to Google's 8.8.8.8 and 8.8.4.4. In my case, my Comcast router points my DHCP hosts to the Comcast DNS servers 75.75.75.75 and 75.75.76.76.

See my PM regarding the FLAC file. In a nutshell, it looks/sounds good here.

Regards,
Kent

[Tim Curtis]

Ok, hopefully the Router knows whats a LAN address and can avoid going out to public DNS first only to get a NAK when trying to resolve a LAN address. I'm used to Router OS that proxies DNS.

[DRONE7]

Ugh, that I2S error looks nasty.

 
Yes  and seems like something seen before on Pi Zero where an I2S hat is 'pressed' on but not soldered.... as the Pi board changes with heat, vibration, etc one or some of the connections detach.

Time to check and re-seat the HAT  ;-)

[Lttlwing16]

Thanks guys, I'll try to pickup a new sdcard and do a fresh install. If that doesn't work I'll reseat the Digione.

I'll report back.

[TheOldPresbyope]

Ok, hopefully the Router knows whats a LAN address and can avoid going out to public DNS first only to get a NAK when trying to resolve a LAN address. I'm used to Router OS that proxies DNS.

That's a subject for the nsswitch/winbind post I promised.

[Lttlwing16]

Fresh micro SD card, fresh install, same outcome. If I play just a minute of a 16/44.1 file it remedies the hesitation on 24/96 files.

Digione has to be interrogated next. I'll see if I can switch to USB output (not sure if MoOde allows this with a I2S device installed) and see if I get the same result.

[Lttlwing16]

Hey guys, didn't know if you'd be open to revisiting an issue I have had recurrently on moOde.

1) Whenever I restart moOde from the UI, it never reconnects to the router via ethernet. I have to manually pull power, unplug the ethernet, plug in power, wait a minute, then replug the ethernet cable into the Rpi. Then it connects. I've confirmed in the Netgear admin page that it is indeed missing from the "wired devices" .

Is this a problem on moOde's side or how I have the router configured. FWIW all my ethernet devices have -0- issues like this.

[Tim Curtis]

Very odd.

What version of moOde?