(04-25-2025, 11:20 PM)fdealexa Wrote: Hi kuyadreiph,v
I would like to go in order:
1. Install from scratch moOde on your system, with "pi" as user and verify that everything works including display and touch (even after a reboot).
2. Install peppymeter step by step as reported in github and verify that everything works in manual command mode (even after a reboot).
3. Eventually, if you want, install the automatic start of peppymeter.
During the whole process, we try to verify and correct any anomalies.
Regards,
Francesco
Hi dev! Thank you i am happy that i manage to work with peppy without any problem. And, mind me to ask if if its possible to add vu meter skin that has not included in the default vu meter?
And,
I am a bit struggling also on how to transfer my file music to my moode system via filezilla. It says access denied.
I am currently using usb drive as bootable and also want to add/transfer my files to the allocated in my usb drive.
Thank you
Regarding the first request, please, try to see the skins produced by a certain GELO5 (mainly for volumio): choose some suitable for the resolution of your video, send me the references and I will try to make them working (obviously without the metadata (title, author, album and cover)).
For the second i have to create an environment to test it.
Best regards,
Francesco
(04-25-2025, 11:20 PM)fdealexa Wrote: Hi kuyadreiph,v
I would like to go in order:
1. Install from scratch moOde on your system, with "pi" as user and verify that everything works including display and touch (even after a reboot).
2. Install peppymeter step by step as reported in github and verify that everything works in manual command mode (even after a reboot).
3. Eventually, if you want, install the automatic start of peppymeter.
During the whole process, we try to verify and correct any anomalies.
Regards,
Francesco
Hi dev! Thank you i am happy that i manage to work with peppy without any problem. And, mind me to ask if if its possible to add vu meter skin that has not included in the default vu meter?
And,
I am a bit struggling also on how to transfer my file music to my moode system via filezilla. It says access denied.
I am currently using usb drive as bootable and also want to add/transfer my files to the allocated in my usb drive.
Thank you
Regarding the first request, please, try to see the skins produced by a certain GELO5 (mainly for volumio): choose some suitable for the resolution of your video, send me the references and I will try to make them working (obviously without the metadata (title, author, album and cover)).
For the second i have to create an environment to test it.
Best regards,
Francesco
Hi dev! I'm so glad that i could set a new screensaver i just did what gelo instruction just like on volumio.
And, for the second concern i am waiting the answer on how to transfer file from pc to moode via filezilla or file explorer.
04-28-2025, 05:46 PM (This post was last modified: 04-28-2025, 05:47 PM by fdealexa.)
(04-28-2025, 01:23 PM)kuyadreiph Wrote:
(04-28-2025, 01:03 PM)fdealexa Wrote:
(04-28-2025, 02:28 AM)kuyadreiph Wrote:
(04-25-2025, 11:20 PM)fdealexa Wrote: Hi kuyadreiph,v
I would like to go in order:
1. Install from scratch moOde on your system, with "pi" as user and verify that everything works including display and touch (even after a reboot).
2. Install peppymeter step by step as reported in github and verify that everything works in manual command mode (even after a reboot).
3. Eventually, if you want, install the automatic start of peppymeter.
During the whole process, we try to verify and correct any anomalies.
Regards,
Francesco
Hi dev! Thank you i am happy that i manage to work with peppy without any problem. And, mind me to ask if if its possible to add vu meter skin that has not included in the default vu meter?
And,
I am a bit struggling also on how to transfer my file music to my moode system via filezilla. It says access denied.
I am currently using usb drive as bootable and also want to add/transfer my files to the allocated in my usb drive.
Thank you
Regarding the first request, please, try to see the skins produced by a certain GELO5 (mainly for volumio): choose some suitable for the resolution of your video, send me the references and I will try to make them working (obviously without the metadata (title, author, album and cover)).
For the second i have to create an environment to test it.
Best regards,
Francesco
Hi dev! I'm so glad that i could set a new screensaver i just did what gelo instruction just like on volumio.
And, for the second concern i am waiting the answer on how to transfer file from pc to moode via filezilla or file explorer.
Regards,
Hi,
I have just tried with an USB key and from file explorer (windows) I see it without any problem, using the ip address of the rpi(reading and writing on it).
Have you enable the SMB file sharing (menu/config/system)?
Would you please try this way?
Regards,
Francesco
(04-25-2025, 11:20 PM)fdealexa Wrote: Hi kuyadreiph,v
I would like to go in order:
1. Install from scratch moOde on your system, with "pi" as user and verify that everything works including display and touch (even after a reboot).
2. Install peppymeter step by step as reported in github and verify that everything works in manual command mode (even after a reboot).
3. Eventually, if you want, install the automatic start of peppymeter.
During the whole process, we try to verify and correct any anomalies.
Regards,
Francesco
Hi dev! Thank you i am happy that i manage to work with peppy without any problem. And, mind me to ask if if its possible to add vu meter skin that has not included in the default vu meter?
And,
I am a bit struggling also on how to transfer my file music to my moode system via filezilla. It says access denied.
I am currently using usb drive as bootable and also want to add/transfer my files to the allocated in my usb drive.
Thank you
Regarding the first request, please, try to see the skins produced by a certain GELO5 (mainly for volumio): choose some suitable for the resolution of your video, send me the references and I will try to make them working (obviously without the metadata (title, author, album and cover)).
For the second i have to create an environment to test it.
Best regards,
Francesco
Hi dev! I'm so glad that i could set a new screensaver i just did what gelo instruction just like on volumio.
And, for the second concern i am waiting the answer on how to transfer file from pc to moode via filezilla or file explorer.
Regards,
Hi,
I have just tried with an USB key and from file explorer (windows) I see it without any problem, using the ip address of the rpi(reading and writing on it).
Have you enable the SMB file sharing (menu/config/system)?
Would you please try this way?
Regards,
Francesco
Hi again! Mind me to ask I'm successfully install the peppy on my new rpi with 7inch lcd. Unfortunately the vu meter/skin are not fitted on my display
My display is 7inch from http://www.lcdwiki.com/7inch_HDMI_Display-C
However, I'd tried to use other meter folder. Results are bad not fitted on my display.
(05-24-2025, 02:40 PM)kuyadreiph Wrote: Hi again! Mind me to ask I'm successfully install the peppy on my new rpi with 7inch lcd. Unfortunately the vu meter/skin are not fitted on my display
My display is 7inch from http://www.lcdwiki.com/7inch_HDMI_Display-C
However, I'd tried to use other meter folder. Results are bad not fitted on my display.
Thank you.
Please take a picture when moode is display and an other picture when peppymeter is started.
Regards
Francesco
(05-24-2025, 02:40 PM)kuyadreiph Wrote: Hi again! Mind me to ask I'm successfully install the peppy on my new rpi with 7inch lcd. Unfortunately the vu meter/skin are not fitted on my display
My display is 7inch from http://www.lcdwiki.com/7inch_HDMI_Display-C
However, I'd tried to use other meter folder. Results are bad not fitted on my display.
Thank you.
Peppy Meter Resolution:
Supplies 25 default meters for the resolutions 320x240, 480x320 and 800x480.
Supplies 8 default meters for the resolution 1280x400.
(05-24-2025, 02:40 PM)kuyadreiph Wrote: Hi again! Mind me to ask I'm successfully install the peppy on my new rpi with 7inch lcd. Unfortunately the vu meter/skin are not fitted on my display
My display is 7inch from http://www.lcdwiki.com/7inch_HDMI_Display-C
However, I'd tried to use other meter folder. Results are bad not fitted on my display.
Thank you.
Please take a picture when moode is display and an other picture when peppymeter is started.
Regards
Francesco
Hi here is my photo i took after i change the meter folder 800x480.
(05-24-2025, 02:40 PM)kuyadreiph Wrote: Hi again! Mind me to ask I'm successfully install the peppy on my new rpi with 7inch lcd. Unfortunately the vu meter/skin are not fitted on my display
My display is 7inch from http://www.lcdwiki.com/7inch_HDMI_Display-C
However, I'd tried to use other meter folder. Results are bad not fitted on my display.
Thank you.
Peppy Meter Resolution:
Supplies 25 default meters for the resolutions 320x240, 480x320 and 800x480.
Supplies 8 default meters for the resolution 1280x400.
Your Screen Resolution: 1024x600
Hi thank you for response. Unfortunately, I'd tried all of them that are listed. And there is no available resolution that same to mine.
However, I'd tried to transfer a vu skin with same resolution to mine from gelo5. Unfortunately, it says access permission denied.
