07-05-2019, 02:43 AM
(This post was last modified: 07-05-2019, 02:45 AM by TheOldPresbyope.)
(07-04-2019, 06:37 PM)franz159 Wrote: I reported problems with Spotify connect in an earlier post but I believe that is related to some firewall setting...
Instead DSD worked for a few minutes then it suddenly became a loud hiss with very very faint music.
Did anyone tested DSD?
It could well be my USB Khadas Tone board broke, but I tested PCM up to 24/192 with no issues.
I’m using rpi4.
Unfortunately did not have time to test same DSD files on my Mac...
@franz159
You don't tell us any details about your configuration nor whether this board worked with the same configuration in earlier versions of moOde.
Your description of the audio output, however, leads me to believe you have chosen hardware volume control and have a moOde volume setting less than 100 percent.
I found in my testing with an earlier version of moOde (http://moodeaudio.org/forum/showthread.p...8#pid11178) that the Khadas Tone Board appears not to implement hardware volume control properly in DSD mode (or at least doesn't expose it to the USB bus in a way that MPD/ALSA can understand it).
For me, the output was crystal clear at 100 percent. At I lowered the volume setting noise started and got progressively louder while the music got progressively softer and more distorted. Software volume control, of course, doesn't work with DSD. I chose to disable volume control.
Both hardware and software volume control worked fine for me with this board in PCM mode, however.
Regards,
Kent
