Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


[PROBLEM] Pi2Design 502Dac Pro problem with Pi 4
#5
(08-17-2019, 01:31 PM)Tim Curtis Wrote: moOde's audio device table has "hifiberry-digi-pro" coded for this device. It's still in Raspbian Buster.

Code:
pi@moode:~ $ ls -l /boot/overlays/hifiberry-digi-pro.dtbo
-rwxr-xr-x 1 root root 1125 Aug 16 20:06 /boot/overlays/hifiberry-digi-pro.dtbo

IIRC the Pi-4B changed how some of the GPIO pins operate. Maybe this is affecting the 502 board?

Yes, before I started using Moode I had to tell Volumio the device was a hifiberry digi+ pro. I had read that the Pi 4 40 pin header retained backward compatibility with previous HATs - is this something that can potentially be fixed by an update to the overlay, or would I need to look at replacing the HAT with one known to work with the Pi 4? (If so, is there a list of "known good" HATs anywhere?

I grepped dmesg for sound related output and got this:

pi@moode:~ $ grep snd- dmesg.out
[    4.211853] snd-rpi-wm8804 socConfusedound: ASoC: CODEC DAI wm8804-spdif not registered - will retry
[    4.386459] snd-rpi-wm8804 socConfusedound: ASoC: CODEC DAI wm8804-spdif not registered - will retry
[    4.423590] snd-rpi-wm8804 socConfusedound: ASoC: CODEC DAI wm8804-spdif not registered - will retry
[    4.493038] snd-rpi-wm8804 socConfusedound: ASoC: CODEC DAI wm8804-spdif not registered - will retry
[    4.506623] snd-rpi-wm8804 socConfusedound: ASoC: CODEC DAI wm8804-spdif not registered - will retry
[    4.507745] snd-rpi-wm8804 socConfusedound: ASoC: CODEC DAI wm8804-spdif not registered - will retry
[    4.509454] snd-rpi-wm8804 socConfusedound: ASoC: CODEC DAI wm8804-spdif not registered - will retry
[    4.584625] snd-rpi-wm8804 socConfusedound: ASoC: CODEC DAI wm8804-spdif not registered - will retry
[    4.656449] snd-rpi-wm8804 socConfusedound: ASoC: CODEC DAI wm8804-spdif not registered - will retry
[    5.155790] snd-rpi-wm8804 socConfusedound: wm8804-spdif <-> fe203000.i2s mapping ok
Reply


Messages In This Thread
RE: [PROBLEM] Pi2Design 502Dac Pro problem with Pi 4 - by aknaggbaugh - 08-17-2019, 06:02 PM

Forum Jump: