64 bit kernel

[TheOldPresbyope]

@alanthebat

So all I know from your OP is that you have moOde 6.3 installed on something and that apparently you selected the 64-bit kernel in moOde config and (I have to guess here) rebooted. What else?

I have no Roon-anything so this is only an intellectual exercise but I just brought up moOde 6.3 on an RPi4B with the 64-bit kernel selected.

Code:

pi@moodelr:~ $ uname -a
Linux moodelr 4.19.75-v8+ #1270 SMP PREEMPT Tue Sep 24 18:59:17 BST 2019 aarch64 GNU/Linux

                                                                        ^^^^^^^

I then downloaded the roonbridge installer for armv7hf (obscure notation, but this is correct for the RPi4B), marked it executable and invoked it:

Code:

pi@moodelr:~ $ curl -O http://download.roonlabs.com/builds/roonbridge-installer-linuxarmv7hf.sh
pi@moodelr:~ $ +x roonbridge-installer-linuxarmv7hf.sh
pi@moodelr:~ $ ./roonbridge-installer-linuxarmv7hf.sh

--------------------------------------------------------------------------------------

Welcome to the RoonBridge installer

This installer sets up RoonBridge to run on linux with the following settings:

 - RoonBridge will be installed in /opt/RoonBridge
 - RoonBridge's data will be stored in /var/roon/RoonBridge
 - RoonBridge will be configured to run as a system service
 - RoonBridge will run as root

These settings are suitable for turning a dedicated or semi-dedicated device
into an appliance that runs RoonBridge

If you want customize how RoonBridge is installed, see:

   http://kb.roonlabs.com/LinuxInstall

--------------------------------------------------------------------------------------

Do you want to install RoonBridge on this machine? [Y/n] Y

Downloading RoonBridge_linuxarmv7hf.tar.bz2 to /tmp/tmp.aaEnxyxDQ2/RoonBridge_linuxarmv7hf.tar.bz2

################################################################################################################################################################# 100.0%

Unpacking RoonBridge_linuxarmv7hf.tar.bz2...Done

Checking to see if RoonBridge can run on this machine 

    Checking for Binary Compatibility                            [   OK   ]
    Checking for ALSA Libraries                                  [   OK   ]

STATUS: SUCCESS


Copying Files...Done
Failed to stop roonbridge.service: Unit roonbridge.service not loaded.

Installing /etc/systemd/system/roonbridge.service

Enabling service roonbridge...
Created symlink /etc/systemd/system/multi-user.target.wants/roonbridge.service → /etc/systemd/system/roonbridge.service.
Service Enabled

Starting service roonbridge...
Service Started

--------------------------------------------------------------------------------------

All Done! RoonBridge should be running on your machine now.

--------------------------------------------------------------------------------------

pi@moodelr:~ $

And, sure enough, it's now running

Code:

pi@moodelr:~ $ ps aux|grep -i roon
root      2124  0.0  0.0   1932   404 ?        Ss   11:28   0:00 /bin/sh /opt/RoonBridge/start.sh
root      2128  0.0  1.7  87228 34024 ?        Sl   11:28   0:01 RoonBridge --debug --gc=sgen --server RoonBridge.exe
root      2145  0.2  1.6  87780 31256 ?        Sl   11:28   0:03 RoonBridgeHelper --debug --gc=sgen --server RoonBridgeHelper.exe
root      2152  0.0  0.0   2228   360 ?        S    11:28   0:00 /opt/RoonBridge/Bridge/processreaper 2145
pi        4532  0.0  0.0   7340   520 pts/0    S+   11:58   0:00 grep --color=auto -i roon

Sooo, what did you do differently?

Regards,
Kent