10-28-2019, 06:03 PM
(10-28-2019, 04:46 PM)Tim Curtis Wrote:Please edit your post and place the command output in code boxes for readability. Its the third button from the right on the toolbar.Code:pi@moode:~ $ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
Subdevices: 7/7
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 IEC958/HDMI [bcm2835 IEC958/HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: ALSA [bcm2835 ALSA], device 2: bcm2835 IEC958/HDMI1 [bcm2835 IEC958/HDMI1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: D20 [Devialet USB Audio 2.0], device 0: USB Audio [USB Audio]
Subdevices: 0/1
Subdevice #0: subdevice #0
pi@moode:~ $
p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 11.0px Menlo; color: #ffffff; background-color: #000000} p.p2 {margin: 0.0px 0.0px 0.0px 0.0px; font: 11.0px Menlo; color: #2fb41d; background-color: #000000} span.s1 {font-variant-ligatures: no-common-ligatures; color: #2fb41d} span.s2 {font-variant-ligatures: no-common-ligatures} span.s3 {font-variant-ligatures: no-common-ligatures; color: #400bd9} span.s4 {font-variant-ligatures: no-common-ligatures; color: #ffffff}
[b]pi@moode[/b]:[b]~ $[/b] moodeutl -l
20191028 185220 worker: -- Start
20191028 185221 worker: Successfully daemonized
20191028 185221 worker: Integrity check (passed)
20191028 185221 worker: Session loaded
20191028 185221 worker: Debug logging (off)
20191028 185221 worker: ALSA volume set to (0%)
20191028 185222 worker: -- System
20191028 185224 worker: Host name (moode)
20191028 185224 worker: moOde release (6.3.0 2019-10-02)
20191028 185224 worker: Raspbian OS (10.1)
20191028 185224 worker: Linux kernel (4.19.75-v7+ #1270)
20191028 185224 worker: Platform (Allo USBridge SIG [Pi-CM3+ Lite 1GB v1.0])
20191028 185224 worker: Architecture (armv7l)
20191028 185224 worker: MPD version (0.20.23)
20191028 185224 worker: CPU governor (ondemand)
20191028 185224 worker: USB boot not available
20191028 185224 worker: File system not expanded yet
20191028 185224 worker: HDMI port on
20191028 185224 worker: File check (OK)
20191028 185224 worker: -- Network
20191028 185224 worker: eth0 exists
20191028 185225 worker: eth0 (192.168.1.123)
20191028 185225 worker: wlan0 does not exist
20191028 185225 worker: -- Audio
20191028 185225 worker: ALSA outputs unmuted
20191028 185225 worker: ALSA card number (1)
20191028 185225 worker: Audio output (USB audio device)
20191028 185225 worker: Supported audio formats (U8, S16_LE)
20191028 185225 worker: ALSA mixer name (Mic)
20191028 185225 worker: MPD volume control (software)
20191028 185225 worker: Hdwr volume controller exists
20191028 185225 worker: -- Services
20191028 185225 worker: Reset renderer active state
20191028 185226 worker: MPD conf updated
20191028 185226 worker: MPD started
20191028 185227 worker: MPD accepting connections
20191028 185227 worker: Configure MPD outputs
20191028 185227 worker: MPD output 1 ALSA default (on)
20191028 185227 worker: MPD output 2 ALSA crossfeed (off)
20191028 185227 worker: MPD output 3 ALSA parametric eq (off)
20191028 185227 worker: MPD output 4 ALSA graphic eq (off)
20191028 185227 worker: MPD output 5 ALSA polarity inversion (off)
20191028 185227 worker: MPD output 6 ALSA bluetooth (off)
20191028 185227 worker: MPD output 7 HTTP stream (off)
20191028 185227 worker: MPD crossfade (off)
20191028 185227 worker: Audio source (Local)
20191028 185227 worker: Output device (Local)
20191028 185227 worker: Squeezelite renderer started
20191028 185227 worker: UPnP renderer started
20191028 185228 worker: DLNA server started
20191028 185228 worker: UPnP browser started
20191028 185228 worker: USB auto-mounter (udisks-glue)
20191028 185228 worker: -- Music sources
20191028 185228 worker: USB sources (none attached)
20191028 185229 worker: NAS and UPnP sources (mountall initiated)
20191028 185229 worker: -- Miscellaneous
20191028 185229 worker: Saved MPD vol level (0)
20191028 185229 worker: Preamp volume level (0)
20191028 185229 worker: MPD volume level (0) restored
20191028 185229 worker: ALSA volume level (100%)
20191028 185229 worker: Auto-play (Off)
20191028 185229 worker: Maintenance interval (6 hrs)
20191028 185229 worker: Screen saver activation (Never)
20191028 185229 worker: Session permissions (OK)
20191028 185229 worker: Watchdog started
20191028 185229 worker: Ready
pi@moode:~ $
p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 11.0px Menlo; color: #ffffff; background-color: #000000} p.p2 {margin: 0.0px 0.0px 0.0px 0.0px; font: 11.0px Menlo; color: #9fa01c; background-color: #000000} p.p3 {margin: 0.0px 0.0px 0.0px 0.0px; font: 11.0px Menlo; color: #000000; background-color: #000000} p.p4 {margin: 0.0px 0.0px 0.0px 0.0px; font: 11.0px Menlo; color: #ffffff; background-color: #000000; min-height: 13.0px} p.p5 {margin: 0.0px 0.0px 0.0px 0.0px; font: 11.0px Menlo; color: #400bd9; background-color: #000000} p.p6 {margin: 0.0px 0.0px 0.0px 0.0px; font: 11.0px Menlo; color: #2fb41d; background-color: #000000} span.s1 {font-variant-ligatures: no-common-ligatures; color: #2fb41d} span.s2 {font-variant-ligatures: no-common-ligatures} span.s3 {font-variant-ligatures: no-common-ligatures; color: #400bd9} span.s4 {font-variant-ligatures: no-common-ligatures; color: #000000} span.s5 {font-variant-ligatures: no-common-ligatures; color: #ffffff} span.s6 {font-variant-ligatures: no-common-ligatures; color: #c0c0c0}
[b]pi@moode[/b]:[b]~ $[/b] alsa-capabilities -s
[b]1[/b]) [b]Analog[/b] output interface [b]hw:0,0[/b] (or [b]hw:ALSA,0[/b])
- card name = [b]ALSA [/b]
- card label = [b]bcm2835 ALSA [/b]
- interface name = [b]bcm2835 ALSA [/b]
- usb audio class = [b](n/a) [/b]
- character device = [b]/dev/snd/pcmC0D0p [/b]
- samplerates (Hz) = [b]U8:44100,48000,88200,96000,176400,192000,352800,384000 [/b]
[b]S16_LE:44100,48000,88200,96000,176400,192000,352800,384000 [/b]
- monitor file = [b]/proc/asound/card0/pcm0p/sub0/hw_params [/b]
- stream file = [b](n/a) [/b]
[b]2[/b]) [b]Digital[/b] output interface [b]hw:0,1[/b] (or [b]hw:ALSA,1[/b])
- card name = [b]ALSA [/b]
- card label = [b]bcm2835 ALSA [/b]
- interface name = [b]bcm2835 IEC958/HDMI [/b]
- usb audio class = [b](n/a) [/b]
- character device = [b]/dev/snd/pcmC0D1p [/b]
- samplerates (Hz) = [b]S16_LE:44100,48000,88200,96000,176400,192000,352800,384000 [/b]
- monitor file = [b]/proc/asound/card0/pcm1p/sub0/hw_params [/b]
- stream file = [b](n/a) [/b]
[b]3[/b]) [b]Digital[/b] output interface [b]hw:0,2[/b] (or [b]hw:ALSA,2[/b])
- card name = [b]ALSA [/b]
- card label = [b]bcm2835 ALSA [/b]
- interface name = [b]bcm2835 IEC958/HDMI1 [/b]
- usb audio class = [b](n/a) [/b]
- character device = [b]/dev/snd/pcmC0D2p [/b]
- samplerates (Hz) = [b]S16_LE:44100,48000,88200,96000,176400,192000,352800,384000 [/b]
- monitor file = [b]/proc/asound/card0/pcm2p/sub0/hw_params [/b]
- stream file = [b](n/a) [/b]
[b]4[/b]) [b]Digital USB Audio Class[/b] output interface [b]hw:1,0[/b] (or [b]hw:D20,0[/b])
- card name = [b]D20 [/b]
- card label = [b]Devialet USB Audio 2.0 [/b]
- interface name = [b]USB Audio [/b]
- usb audio class = [b]2 - isochronous asynchronous [/b]
- character device = [b]/dev/snd/pcmC1D0p [/b]
- samplerates (Hz) = [b]S32_LE:44100,48000,88200,96000,176400,192000 [/b]
[b]S16_LE:44100,48000,88200,96000,176400,192000 [/b]
- monitor file = [b]/proc/asound/card1/pcm0p/sub0/hw_params [/b]
- stream file = [b]/proc/asound/card1/stream0 [/b]
pi@moode:~ $
