...and finally... IT WORKS! :-)
I made some checks about soldering. At first on the female 2x20 connector soldered on the DAC. 2 of 40 pins had problems, and unluckly both were used by the display (DB6 and DB7). So I modify the Winstar_DisplayOLED.py to set others GPIOs.
Second, a couple of connectors on the OLED display had been re-solderered... and not all the stuff works great.
And now... go with case painting and assembling!
ciaooo
Andrea
I made some checks about soldering. At first on the female 2x20 connector soldered on the DAC. 2 of 40 pins had problems, and unluckly both were used by the display (DB6 and DB7). So I modify the Winstar_DisplayOLED.py to set others GPIOs.
Second, a couple of connectors on the OLED display had been re-solderered... and not all the stuff works great.
And now... go with case painting and assembling!
ciaooo
Andrea
