05-24-2018, 09:38 PM
Hi!
I experience a very loud peak noise between two songs playing from a playlist on an USB-Stick. It does not happen all the time, but quite often. This is not just an annoying click, but it is so loud that it makes me jump.
I checked the mp3 files and they seem to be fine.
I appreciate the sound quality with moode, but this makes it unusable for me. I hope there is a solution to this problem.
Here is the info about my installation (please let me know if you need more):
Release Information
Resampling: off
Crossfeed: off
Equalizer: Graphic EQ: (Hi-Lo Boost), Parametric EQ: (off}
Crossfade: 10 seconds
Other: Volume normalize (no}, Replaygain (off)
Chip options: FIR interpolation with de-emphasis, gain=0 dB, boost=0 dB
Volume ctl: Software (MPD 32-bit float with dither)
AUDIO DEVICE
Device: HiFiBerry DAC+ Pro
Chip: Burr Brown PCM5122
Architecture: Sigma/Delta Advanced Segment 24 bit 192 kHz
Interface: I2S
I experience a very loud peak noise between two songs playing from a playlist on an USB-Stick. It does not happen all the time, but quite often. This is not just an annoying click, but it is so loud that it makes me jump.
I checked the mp3 files and they seem to be fine.
I appreciate the sound quality with moode, but this makes it unusable for me. I hope there is a solution to this problem.
Here is the info about my installation (please let me know if you need more):
Release Information
- Release: 4.1 2018-04-02 View relnotes
- Update: (None)
- Raspbian ver: 9.4
- Linux kernel: 4.14.32-v7+, armv7l
- Hdwr revision: Pi-3B 1GB v1.2
- MPD version: 0.20.18
Resampling: off
Crossfeed: off
Equalizer: Graphic EQ: (Hi-Lo Boost), Parametric EQ: (off}
Crossfade: 10 seconds
Other: Volume normalize (no}, Replaygain (off)
Chip options: FIR interpolation with de-emphasis, gain=0 dB, boost=0 dB
Volume ctl: Software (MPD 32-bit float with dither)
AUDIO DEVICE
Device: HiFiBerry DAC+ Pro
Chip: Burr Brown PCM5122
Architecture: Sigma/Delta Advanced Segment 24 bit 192 kHz
Interface: I2S