@TheOldPresbyope
WOW!! Doing cartwheels here...
That is such an improvement.....a couple of seconds for the same cd
less than 4 seconds for a new cd.... whoo hoo!!
Unfortunately....when I select a track to play mpd consumes 100% cpu and Pi2B starts cooking.....then all the tracks disappear from the moode page and top reports mpd at 100% cpu usage.....this does not resolve and a reboot is needed.
EDIT 2.0
Ok... yes the dmesg was correct....seems the usb hub has died....replaced and now all is working as expected....your update works !! in toto
cheers..bob
WOW!! Doing cartwheels here...
That is such an improvement.....a couple of seconds for the same cd
less than 4 seconds for a new cd.... whoo hoo!!
Unfortunately....when I select a track to play mpd consumes 100% cpu and Pi2B starts cooking.....then all the tracks disappear from the moode page and top reports mpd at 100% cpu usage.....this does not resolve and a reboot is needed.
Code:
dmesg | tail -20
[ 46.732013] scsi 1:0:0:0: CD-ROM Toshiba SuperMultiPA3761 TO01 PQ: 0 ANSI: 0
[ 46.774655] sr 1:0:0:0: Power-on or device reset occurred
[ 46.840442] sr 1:0:0:0: [sr0] scsi3-mmc drive: 8x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 46.841687] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 46.842299] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 98.823749] usb 1-1.5.4: USB disconnect, device number 8
[ 98.863903] scsi 1:0:0:0: rejecting I/O to dead device
[ 104.652803] usb 1-1.5.4: new high-speed USB device number 9 using dwc_otg
[ 104.784073] usb 1-1.5.4: New USB device found, idVendor=0930, idProduct=0c06, bcdDevice= 6.17
[ 104.784093] usb 1-1.5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 104.784101] usb 1-1.5.4: Product: Ext SuperMulti
[ 104.784109] usb 1-1.5.4: Manufacturer: Toshiba
[ 104.784116] usb 1-1.5.4: SerialNumber: SATASLIM00003000000
[ 104.788137] usb-storage 1-1.5.4:1.0: USB Mass Storage device detected
[ 104.790472] scsi host2: usb-storage 1-1.5.4:1.0
[ 105.855903] scsi 2:0:0:0: CD-ROM Toshiba SuperMultiPA3761 TO01 PQ: 0 ANSI: 0
[ 105.898519] sr 2:0:0:0: Power-on or device reset occurred
[ 105.964370] sr 2:0:0:0: [sr1] scsi3-mmc drive: 8x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 105.966251] sr 2:0:0:0: Attached scsi CD-ROM sr1
[ 105.967257] sr 2:0:0:0: Attached scsi generic sg1 type 5EDIT 2.0
Ok... yes the dmesg was correct....seems the usb hub has died....replaced and now all is working as expected....your update works !! in totocheers..bob
----------
bob
bob
