02-19-2020, 06:16 AM
(02-18-2020, 07:00 PM)Tim Curtis Wrote: Not much information about your configuration. You should post details about your hardware and also a System info dump.
Code:sudo /var/www/command/sysinfo.sh
I have splitted the config into two posts. could not attach txt file and length too long.
One more thing to notice is that I wanted to make sure there is no hardware problem and installed volumio. With same exact hardware (except sd card) it runs cristal clear without any pops and clicks.
Code:
$ sudo /var/www/command/sysinfo.sh
S Y S T E M P A R A M E T E R S
moOde release = 6.4.2 2020-02-12
Raspbian OS = 10.2
Linux kernel = 4.19.97-v8+ #1293
Platform = Pi-3B 1GB v1.2
Architecture = aarch64 (64-bit)
System uptime = up 1 minute
Timezone = Europe/Bucharest
Current time = 2020-02-19 08:07:54
Host name = nap001
Ethernet address = unassigned
Ethernet MAC = b8:27:eb:ff:3b:26
WLAN address = 10.10.10.10
WLAN MAC = b8:27:eb:aa:6e:73
WLAN country = RO
SoC identifier = bcm2837
Core count = 4
Kernel timer freq = 250 Hz
SDCard freq = 50 MHz
USB boot = not enabled
Warranty = OK
Root size = 15G
Root used = 19%
Root available = 12G
Root expand = expanded
Memory free = 572 MB
Memory used = 111 MB
SoC temperature = 37.0°C
CPU governor = ondemand
Onboard WiFi = On
Onboard BT = On
HDMI output = Off
Eth addr wait = On
Max USB current = Off
USB (UAC2) fix = Off
Pi-3B+ eth fix = Off
SSH term server = On
PHP-FPM version = 7.3.11
NGINX version = 1.14.2
SQLite3 version = 3.27.2
Hostapd version = 2.8-devel
WiringPi version = 2.50
RPi.GPIO version = 0.7.0
A U D I O P A R A M E T E R S
Audio device = USB audio device
Interface = USB
Mixer name = D50s
Hardware volume = Controller detected
Max ALSA volume = 100
Audio source = Local
Output device = Local
Resume MPD = No
Volume knob = 100
Volume mute = Unmuted
Saved MPD vol = 0
Preamp volume = 0
ALSA version = 1.1.8-1+rpt1
SoX version = 0.1.2-3
Bluetooth controller = On
Pairing agent = On
Airplay receiver = Off
Spotify receiver = Off
Squeezelite = Off
UPnP client = Off
DLNA server = Off
GPIO button handler = Off
UPnP browser = Off
Auto-shuffle = On
Autoplay = Off
Rotary encoder = Off
Encoder params = 100 2 3 23 24
Polarity inversion = Off
Crossfeed = Off
Crossfade = Off
Parametric EQ = Off
Graphic EQ = Off
MPD httpd = Off 