How to get sqeezelite to play native DSD

[boring]

I can't seem to get squeezelite to output DSD native on my USBridge with Moode 6.4.2. The output is always resampled to PCM. This is the output:

pi@moode:~ $ cat /proc/asound/card1/stream0
Amanero Technologies Combo384 Amanero at usb-3f980000.usb-1.2, high speed : USB Audio

Playback:
  Status: Running
    Interface = 1
    Altset = 1
    Packet Size = 536
    Momentary freq = 352793 Hz (0x2c.1960)
    Feedback Format = 16.16
  Interface 1
    Altset 1
    Format: S32_LE
    Channels: 2
    Endpoint: 5 OUT (ASYNC)
    Rates: 32000, 44100, 48000, 88200, 96000, 176400, 192000, 352800, 384000, 705600, 768000
    Data packet interval: 125 us
  Interface 1
    Altset 2
    Format: S32_LE DSD_U32_BE
    Channels: 2
    Endpoint: 5 OUT (ASYNC)
    Rates: 32000, 44100, 48000, 88200, 96000, 176400, 192000, 352800, 384000, 705600, 768000
    Data packet interval: 125 us


With MPD DSD native was playing with this output:

pi@moode:~ $ cat /proc/asound/card1/stream0
Amanero Technologies Combo384 Amanero at usb-3f980000.usb-1.2, high speed : USB Audio

Playback:
  Status: Running
    Interface = 1
    Altset = 2
    Packet Size = 136
    Momentary freq = 88198 Hz (0xb.0658)
    Feedback Format = 16.16
  Interface 1
    Altset 1
    Format: S32_LE
    Channels: 2
    Endpoint: 5 OUT (ASYNC)
    Rates: 32000, 44100, 48000, 88200, 96000, 176400, 192000, 352800, 384000, 705600, 768000
    Data packet interval: 125 us
  Interface 1
    Altset 2
    Format: S32_LE DSD_U32_BE
    Channels: 2
    Endpoint: 5 OUT (ASYNC)
    Rates: 32000, 44100, 48000, 88200, 96000, 176400, 192000, 352800, 384000, 705600, 768000
    Data packet interval: 125 us


Problem should be with the sqeezelite configuration. Can someone post their squeezelite config settings which output DSD native? Thanks!