03-16-2020, 05:13 PM
Brand new SD card, fresh download and install of Moode 6.4.2. Bluetooth doesn't connect. A scan shows up the iPad and iPhone but any attempt at pairing or connecting causes Moode to hang with just a "reconnect" message and I have to cycle the power in order to restart. I put the old Moode 6.3.0 card back in and BT connects easily. I have double checked all the config settings in both are identical.
I am no expert on Bluetooth, I've only ever used it to connect my phone to my car's ICE so I don't really understand the nuts and bolts of it. What settings should I be using in Moode? At present under Audio settings, BT is ON, pairing agent is ON, speaker sharing OFF, Resume MPD NO. In BlueZ Config I first scan for devices which takes 20-30 seconds and may or may not result in both devices showing in the list. MPD output is LOCAL. Initiating a connection from the iPhone gives "connection unsuccessful". Moode 6.3.0 connects OK so I guess the hardware must be OK.
Any ideas please?
I am no expert on Bluetooth, I've only ever used it to connect my phone to my car's ICE so I don't really understand the nuts and bolts of it. What settings should I be using in Moode? At present under Audio settings, BT is ON, pairing agent is ON, speaker sharing OFF, Resume MPD NO. In BlueZ Config I first scan for devices which takes 20-30 seconds and may or may not result in both devices showing in the list. MPD output is LOCAL. Initiating a connection from the iPhone gives "connection unsuccessful". Moode 6.3.0 connects OK so I guess the hardware must be OK.
Any ideas please?
