06-13-2018, 09:38 PM
Hi William,
I run my Piano 2.1 config with 2 x 5V feeds from an Anker battery similar to #5. The power sequence I use is below.
Powering down
Perform Menu, Restart, Shutdown and wait for the green activityr LED on the Pi to blink 10 times indicating the shutdown sequence is complete and power can safely be disconnected.
1. Disconnect power from the Pi
2. Disconnect power from the DAC
Powering up
1. Connect power to the DAC
2. Connect power to the Pi
I run my Piano 2.1 config with 2 x 5V feeds from an Anker battery similar to #5. The power sequence I use is below.
Powering down
Perform Menu, Restart, Shutdown and wait for the green activityr LED on the Pi to blink 10 times indicating the shutdown sequence is complete and power can safely be disconnected.
1. Disconnect power from the Pi
2. Disconnect power from the DAC
Powering up
1. Connect power to the DAC
2. Connect power to the Pi
