Hi all ,
I have a random issue with my setup where after a while of listening to radio, randomly the playback pauses, even stranger after listening to nothing for a while it randomly will start playing again .
my setup is Raspberry pi 4 , Hifiberry amp2, gpio handler enabled for momentary button control ( which I believe is related ot the problem) and mono output provided by sox resampling option , also I have volume control set to software .
I believe it is related either to the gpio handler configuration or the buttons themselves .
I have configured mpc toggle on gpio6 , vol up on gpio 5 and vol down on gpio26 . The other tails of the buttons are to ground, Deounce is 750ms , not sure if this I helpful but just in case its my handy work causing the issue!
When pressed all buttons work as expected except that when no audio is playing if I press vol up or vol down a few times , audio begins playing (not sure if this is expected behaviour ?)
no physical connection is shorting between the pins as I soldered female gpio connectors to the ends of each button tail and they fit nice and snug .
nothing obvious appears in any of the logs but I'm not entirely sure what I'm looking for .
any ideas or advice would be great .
I have a random issue with my setup where after a while of listening to radio, randomly the playback pauses, even stranger after listening to nothing for a while it randomly will start playing again .
my setup is Raspberry pi 4 , Hifiberry amp2, gpio handler enabled for momentary button control ( which I believe is related ot the problem) and mono output provided by sox resampling option , also I have volume control set to software .
I believe it is related either to the gpio handler configuration or the buttons themselves .
I have configured mpc toggle on gpio6 , vol up on gpio 5 and vol down on gpio26 . The other tails of the buttons are to ground, Deounce is 750ms , not sure if this I helpful but just in case its my handy work causing the issue!
When pressed all buttons work as expected except that when no audio is playing if I press vol up or vol down a few times , audio begins playing (not sure if this is expected behaviour ?)
no physical connection is shorting between the pins as I soldered female gpio connectors to the ends of each button tail and they fit nice and snug .
nothing obvious appears in any of the logs but I'm not entirely sure what I'm looking for .
any ideas or advice would be great .