[How to do instruction] AUDIOPHONICS RaspDAC Mini Kit - I-Sabre ES9038Q2M

[superpat]

@TookaFace 

I am still struggling on

Using the test command you suggested, this is the current returned  output:-


 sudo /usr/bin/python /home/pi/oled/raspdac_oled_main.py
wlan0: error fetching interface information: Device not found
amixer: Unable to find simple control 'Digital',0

Exception - Main Module
(<type 'exceptions.IndexError'>, 'raspdac_oled_main.py', 178)
pi@moode:~/oled $ sudo /usr/bin/python /home/pi/oled/raspdac_oled_main.py
wlan0: error fetching interface information: Device not found
amixer: Unable to find simple control 'Digital',0

Exception - Main Module
(<type 'exceptions.IndexError'>, 'raspdac_oled_main.py', 178)


?????

cheers

P

It's weird, do u have set your dac in moOde ui and restart ?

Try this command after u do that:

Code:

amixer sset -c 0 Digital unmute

Witch pi do you own ?

PS: Can you show the content of the /boot/config.txt file ?

@TookaFace

Hi,

I am going to start again,  I have done so many alterations, I do not know how much cruft is left in the OS. I am going to restart with a new copy of Moode 6.4.2 and I will  go through your process again!

I am using a Pi 3b+, and an Audiophonics ES9038Q2M, ( Kali version), with a Kali reclocker. (Mounted side by side with the Audiophonics Gpio bridge PCB).  Moode is set to a HW volume control.

Moode audio works well and sounds really great.   

This is current config.txt    NOTE  Set up at this time for Soekris 1021DAM R2R dac and not ES9038Q2M, (I  was comparing the SQ of the two Dacs, and had not put the ES9038 back into the system).     

AHHH! Just thought, when I use the 1021DAM, I set the Moode Audio volume control to NONE, as I have a hardware volume control set up on the Soekris dac module.


dtparam=spi=on
dtparam=i2c_arm=on
dtoverlay=rpi-dac
dtoverlay=pi3-disable-wifi
dtoverlay=pi3-disable-bt


I will be a few days away, until I get everything reinsatalled,  hope it works this time!

thanks for your help so far

cheers

P