06-18-2020, 11:30 AM
(This post was last modified: 06-18-2020, 11:32 AM by TheOldPresbyope.
Edit Reason: rewording
)
@rAudio
1. uSD cards are not all the same. Have you tried the simple expedient of swapping the 32GB and 128GB cards between the two RPi4Bs and rebooting? Is the behavior related to a specific RPi4B or to the 128GB card?
2. To expand on @DRONE7's post, the RPi model 4 differs from earlier models in that it has some of its firmware stored in eeprom so that It is available at boot but can be updated from time to time. (Previous models use the contents of the bootcode.bin file.)
Check your two RPi4Bs using the vcgencmd command to be sure they are running the same firmware version. Here's an example for the moOde player in my living room:
If they are not the same, then consult the RPi booteeprom documentation on the update process.
Regards,
Kent
PS - (my favorite soapbox topic) This is not a moOde 6.5.2 bug report. It should be the subject of a separate thread.
1. uSD cards are not all the same. Have you tried the simple expedient of swapping the 32GB and 128GB cards between the two RPi4Bs and rebooting? Is the behavior related to a specific RPi4B or to the 128GB card?
2. To expand on @DRONE7's post, the RPi model 4 differs from earlier models in that it has some of its firmware stored in eeprom so that It is available at boot but can be updated from time to time. (Previous models use the contents of the bootcode.bin file.)
Check your two RPi4Bs using the vcgencmd command to be sure they are running the same firmware version. Here's an example for the moOde player in my living room:
Code:
pi@moodelr:~ $ /opt/vc/bin/vcgencmd bootloader_version
Apr 16 2020 18:11:26
version a5e1b95f320810c69441557c5f5f0a7f2460dfb8 (release)
timestamp 1587057086If they are not the same, then consult the RPi booteeprom documentation on the update process.
Regards,
Kent
PS - (my favorite soapbox topic) This is not a moOde 6.5.2 bug report. It should be the subject of a separate thread.
